Designed for content creators, gamers, and mixing engineers, the active pair of PreSonus ERIS 3.5BT Bluetooth Studio Monitors Pairprovide a clear, accurate frequency response and a wide variety of inputs. These small monitors utilize a 3.5" woven composite woofers and 1" silk dome tweeters for a balanced sound across its 80 Hz to 20 kHz frequency range. You can input sound to the monitors over 1/4" TRS jacks, unbalanced RCA inputs, a 3.5mm auxiliary input, or Bluetooth 5.0 streaming. Whether you're monitoring from an audio interface, a computer output, a receiver, or a mobile device, these monitors can accommodate you.

Change the level with a prominent front-panel volume control. At the rear, you'll find both high and low EQ knobs for tuning the monitors to your room. There is 50W of Class AB power supplied (25W per side) giving you a powerful punch for the size. When you need to work or listen late at night, you'll appreciate the built-in headphone amplifier and 3.5mm headphone output for silent monitoring.

Compact Speakers for Content Creation    For Gaming, Monitoring, and More    Bluetooth 5.0 Streaming    3.5" Woven Composite Woofer    1" Silk-Dome Tweeter    Low- and High-Frequency Adjustment    Class A/B Amplifier    1/4" TRS and RCA Inputs    3.5mm Auxiliary Input    3.5mm Headphone Output

• 3.5" woven-composite, low-frequency transducer
• 1" ultra-low-mass, silk-dome, high-frequency transducer
• Fast, reliable, stereo Bluetooth 5.0 wireless input
• 50W (25W per side) Class AB amplification
• 80 Hz to 20 kHz frequency response
• 97 dB SPL (peak, at 1 meter)
• High- and low-frequency Acoustic Tuning controls
• Balanced,1/4" TRS inputs; unbalanced, 3.5mm stereo and RCA inputs; and integrated stereo headphone amplifier with front-panel 3.5mm output
• Protection: RF interference, output-current limiting, over-temperature, turn-on/off transient, subsonic filter
• Power Saver mode (engages after 40 minutes)
• Comes with speaker wire, 3.5mm TRS to stereo RCA cable, and stereo RCA to stereo TS cable

Related Questions and Answers

Q: 1. Will these speakers work with a Mac Mini w/Mac OS 11.6 with bluetooth?

A: Yes, the Mackie CR3-XBT Creative Reference Series 3" Multimedia Monitors with Bluetooth should connect to a Bluetooth-enabled Mac Mini, either over Bluetooth or hardwired via cable.

Q: 2. Can a dj-style mixer be connected directly to these monitors? Do they need an amplifier or DSP in between? I was thinking about using these for my small home sound system. I have a turntable and a CD player connected to a mixer, which currently feeds into an enormous old Pioneer Digital Signal Processor unit (that gets pretty hot), and I have big old passive event-sized speakers connected to the DSP. I would like to replace the giant speakers with something smaller that will sound good for the space, and I'd *like* to eliminate the DSP unit if possible. But I can't tell from the product info here or on the manufacturer's website if I'm thinking about this correctly or not.

A: These speakers can be connected directly to the outputs of a dj mixer via the two TRS 1/4'' jacks, or the rca inputs on the back. These can also be connected to a DSP units outputs in the same way. Please note, these speakers are already powered by a built in amp, and can not take a connection from a speaker amplifier.

Q: 3. I"m longer for a longer cable to connect the second speaker, but I can't find that type of cable. Can anyone recommend one?

A: This is a proprietary cable. We do not offer a longer version.

Q: 4. Do these speakers have the annoying auto sleep mode if not use for a bit and have a time delay to wake based on the level?

A: The Samson MediaOne M50BT Studio Monitors do have a Standby mode and in order to save power, the speakers will go into Standby mode when no signal is preset for longer than 5 minutes. The front panel Power Indicator will turn off, even with Power Switch in the On position. The speakers will automatically wake up when signal is passed through the inputs.

Q: 5. Can you listen to the 3.5mm AUX In and the TRS inputs simultaneously?

A: No. Both inputs on the PreSonus MicroStation BT 2.1 Monitor Controller cannot be used simultaneously. You have the option of using either the 3.5mm AUX input or the left/right 1/4" TRS inputs, but not both at the same time.

Q: 6. Can I play my Google Nest speaker through these speakers?

A: Yes, it is possible to pair the Google Nest with another Bluetooth speaker such as the Mackie CR5-XBT Creative Reference Series 5" Multimedia Monitors with Bluetooth.

Q: 7. I'm hoping to use this with a turntable. Would this work and should it be placed before or after the preamp? Thanks

A: Yes, the PreSonus MicroStation BT 2.1 could be used with a turntable. It should be placed after the phono preamp.

Q: 8. How long is the speaker to speaker cable?

A: The included speaker to speaker cable is approximately 5-feet long.

Q: 9. can the spkrs be connected to 1/4" inputs and RCA inputs at the same time? ie, to my computer and to my studio audio interface

A: Yes, the Mackie CR4-X Creative Reference Series 4" Multimedia Monitors can be connected to multiple devices such as a computer and a USB audio interface at the same time using the 1/4" and the RCA inputs.

Q: 10. How many bits is DAC for S/PDIF?

A: According to Presonus, the bit rate for the S/PDIF is up to 24-bit.