The 14.7' long 1/4" Phone Twin TRS Balanced Audio Cable 14.7'from 1/4" Phone Twin TRS Balanced Audio Cable 14.7'is a professional twin audio cable with color coded jacks. The woven braided shielding is flexible and abrasion resistant, and the nickel plated jacks are corrosion resistant.

Woven Braided Shielding    Nickel-Plated Jacks    Compact Plug Design

Related Questions and Answers

Q: 1. Is this compatible with the Luxli Timpani 1x1 RGBAW LED Light?

A: Yes the Avenger Combo Alu Stand 45 with Leveling Leg would be compatible with the Timpani.

Q: 2. Can I use this cable with my Deity V-Mic D4 Mini Microphone on the Osmo Pocket 3?

A: Yes, you can use the Deity Microphones C21 3.5mm TRS to USB-C Coiled Audio Cable to connect the Deity V-Mic D4 Mini Microphone to the DJI Osmo Pocket 3 camera.

Q: 3. Can i use this as an IFB with an G3 wireless?

A: It wont work as the JK box is only XLR and . The EW is 3.5mm proprietary locking connectors.

Q: 4. Can I attach broadcast headset to this and broadcast a sports event?

A: The JK Audio Daptor Two is an audio interface designed specifically for use with cell phones and cordless phones. We cannot verify if a broadcast headst will function properly.

Q: 5. Will the Avenger A9000NB Wheel Set fit on this stand?

A: Yes, the Avenger A9000NB Wheel Set is compatible with the Avenger A1045B.

Q: 6. Could I use this to monitor the recording levels during our church service? Our sound equipment is in a back room. We have a Presonus and I use an iPad to make adjustments during the service from a seat in the congregation. But I have no way to listen to the recording levels without being disruptive. If this would allow me to hear the input to the recorder over my phone during the service it would be so helpful!! Will it do that?

A: Theoretically, you could patch your board into a the JK audio daptor 2, connect it to a cell phone, and have another person call said cell phone to listen to the audio signal being patched into the JK Audio box. Monitoring this way would not be my first choice however. I'd probably consider getting an IEM wireless system, and if having the signal penetrate walls were an issue, I'd get some paddle antennas into the auditorium. This set up would allow me to be wireless from the console, and have the ability to use high quality headphones into the beltpack receiver. If this interest you, look into the Sennheiser ew 300 IEM G3 Wireless In-Ear Monitoring System; B&H# SEEW300IEM3A.

Q: 7. Will this cord allow use of both ends of the V-Mic D4 Duo with an iPhone?

A: No, you will need a few adapters to make Deity work with iphone below are the items you need: https://www.bhphotovideo.com/c/product/1561511-REG/saramonic_sr_c2002_apple_lightning_connector.html https://www.bhphotovideo.com/c/product/1048151-REG/rode_sc4_trs_to_trrs_adaptor.html

Q: 8. I'm trying to connect two church campuses for a meeting via cell phone and am wondering if two of these JK units would be of help so that the two campuses could communicate through their PA systems via cellular network. The question I have is how do I adapt the 3way 3.5mm jack into an audio in and out cable for use with the JK unit?

A: On the JK unit, 1.Insert 1/4 inch 3 conductors jack to (wireless Phone Hand set Jack) on the unit and the other end with 4 conductors jack to your cellphone.2.Insert XLR female to (From Phone Mic Level) on the unit and the other end of XLR male to Mic input on your audio mixer.3.Insert XLR male to (Line Input) on the unit and the other end of XLR female to Main out or Phone on your audio mixer.Both sides will have to use microphones connected to their audio system to speak instead of your cell phone.

Q: 9. Can I use this cable to connect a Rode Wireless Go II mic to an android phone? Can it be used with the dual channels or just one

A: Yes, the Deity Microphones C21 3.5mm TRS to USB-C Coiled Audio Cable can be used to connect the Rode Wireless Go II, however, it can only connect 1 channel, so in order to use both mics, you will need to run the Wireless Go in Mono Mode.

Q: 10. will this work with my Sennheiser receiver and my macbook pro?

A: The Deity Microphones C21 3.5mm TRS to USB-C Coiled Audio Cable (BH # DEC21) is designed to transmit timecode only (for the Deity Microphones TC-1) and may not function with other components in the manner you intend.