Monitor you surroundings with the Pelco Sarix IMV529-1ERS 5MP Outdoor Mini Dome Camerafrom Pelco. This unit uses a 1/2.7" progressive scan CMOS sensor to capture 2560 x 1920 resolution video at 20 fps. IR LEDS provide up to 98' of illumination in low-light conditions. The camera features a 3.4-9.4mm motorized varifocal lens that delivers a 90 to 30° horizontal field of view. A built-in microphone enables the camera to pick up audio from up to 16.4' away. An onboard memory card slot accepts microSD/SDHC/SDXC cards up to 256GB (available separately). Integrated PoE technology simplifies connectivity by transferring data and power over one cable.

This camera complies with ONVIF profiles G, S, and T, making it compatible with a wide range of surveillance devices. It is housed in an IP66- and IK10-rated enclosure for safe outdoor use and protection from vandalism.

2560 x 1920 Resolution at 20 fps    IR Illumination up to 98'    3.4-9.4mm Motorized Varifocal Lens    90 to 30° Horizontal Field of View    Built-In Microphone    Supports microSD Cards up to 256GB    RJ45 Ethernet with PoE Technology    Complies with ONVIF Profiles G, S & T    IP66 Rated for Outdoor Use    IK10-Rated Vandal Resistance

Removable IR cut filter enables day and night functionality

Triple simultaneous video streams (up to 8 configurable profiles)

Built-in microphone with an audio pickup range up to 16.4'

Event triggers include: camera tampering detection, audio detection, manual trigger, motion detection, periodical trigger, recording notification, microSD card life expectancy, and system boot

Data encryption

Image settings include: video title and time stamp overlay, video orientation (flip, mirror, rotation), day/night settings, white balance, image adjustment (brightness, contrast, saturation, sharpness, gamma curve), defog, 3D-DNR, BLC, HLC, exposure control (exposure level, exposure time, gain control), AE speed adjustment, WDR, privacy mask, and scheduled profile settings

61 dB S/N ratio

Dynamic GOP (group of picture) structure

Compatible with Microsoft Windows 7 to 10, VideoXpert VMS, Chrome, Firefox, Edge, and VLC

Related Questions and Answers

Q: 1. Compatible with Amaran COB 200x?

A: Yes, the amaran Light Dome Mini SE (22.8") compatible on the amaran COB 200x LED Monolight.

Q: 2. Would like to use this on a CPC-1100. What is the video frame-rate for this camera? I plan to use it for live video feed to a Jumbo-tron at a large stadium event. Will this camera do the job?

A: 6.23 to 52.37 at the lowest resolution, 0.71 to 5.99 at the highest resolution

Q: 3. Is this camera compatible with any/most Celestron telescopes. I have a Skywatcher 105 mm, is this a good investment for me?

A: Without knowing your experience its hard to give you a simple answer. Your scope is too small for great planetary images, you need more aperture (8 +) and a longer prime focal length (2000mm +). This camera will function as if you were using a 8mm eyepiece, the detail that you can see can be captured ith this camera.Jupiter and some bands, Saturn and its rings. Mars will be too small. This camera will work very well on the moon.It's not a simple camera like a dslr, it takes videos of your subject (1000-2000), you have do the image processing in Registax software. If your familiar with this software this camera might be for you. Registax is a very powerful software for weeding out bad video frames, stacking them then enhancing the image. After this is done, you still have to bring the final image into Photoshop and continue to process it. If you have these skills, its a wonderful camera. If you can't be bothered to invest the time and effort to learn and experience it will not be a good investment. This product is no good for stars, clusters, nebula, or galaxies.It also requires that your scope is properly polar aligned and your tracking fairly accurate.

Q: 4. does this fit on a LCM114 Telescope?

A: The Celestron NexImage 5 Solar System Imager (5MP) BH #CENM5SSI • MFR #93711 will work with the Celestron 114LCM 114mm f/9 Computerized GoTo Reflector Telescope BH #CE114LCM • MFR #31150 or any other make and model telescope with a 1.25" eyepiece.

Q: 5. Is this compatible with the 100 series from Amaran?

A: Yes, the Amaran Light Dome Mini SE (22.8") is compatible on the Amaran 100 series lights like the 100x Bi-Color LED Monolight.

Q: 6. does it fit a Celestron LCM114 telescope?

A: Yes it will fit the Celestron 114LCM 114mm f/9 Computerized GoTo Reflector Telescope BH #CE114LCM • MFR #31150 or any other make or model telescope with a 1.25" eyepiece.

Q: 7. Where is this the neximage 5 solar imager made ?

A: The country of origin for this item is the country of China.

Q: 8. Ive had trouble keeping a good track on Jupiter and Saturn with my Celestron 6se and my Neximage 5. Both planets drift out of the Icap window even after I have a good alignment. Any suggestions?

A: Make sure your tripod is level, and confirm the telescope is tracking a celestial object after a successful alignment. If you are using a Barlow Lens, consider using a 1.5x Barlow Lens or not one at all. Sincerely, Garret at Celestron

Q: 9. is it possible to attach this camera to a baader hyperion zoom ? I am planning to buy a skywatcher 120mm ed refractor and a vx mount ,but I am unclear as to if this can only be used with barlows for multiples of prime focus or if it can be attached to ep's

A: The NexImage 5 camera does not have a lens and is not designed to record images through an eyepiece. It is designed to fit into your telescope's 1.25 focuser drawtube (or 2 to 1.25 adapter) in place of an eyepiece, using the optics of your telescope as a lens. In principal, you can use this camera with a Barlow for added magnification, but the 2.2 micron pixel size of the Neximage 5 combined with the 840mm focal length of the Skywatcher 120 ED already means that to 0.54 arc-seconds of sky will be spread over each pixel. A 120mm aperture only gives an angular resolution of (at best) 1.16 arc-seconds due to diffraction. In this situation any extra magnification provided by a Barlow can do little to improve the resolution of the image and will work against you by reducing the signal to noise ratio.

Q: 10. Which adapter do I need please to be able to use this camera with a 2" eyepiece holder? Thanks

A: You will need a 2"-to-1.25" Telescope Eyepiece Adapter for this imager.