[RP-SMA] I had minor issue only with a little bit short mini USB cable, so I have replaced it with longer cable I have had before. Performance is as advertised.

[RP-SMA] This little inexpensive HDMI amplifier block was inserted into a line from a consumer camera going to the video switcher in our church. The specs said that the input side should not exceed 80-feet or so. We knew we had exceeded that by about 10-feet and had been warned that the output signal from a consumer-grade camera was not as robust as that from a Blu-Ray player or cable box. There was fear that this unit would not clean up the red sparkles in the picture on black objects we suffered from. But when the booster was inserted in place of a cable coupler close to the switcher input selector the picture jumped to correct color rendering. We are completely satisfied with the product and probably will order another to hold for future use. It performs better than the advertised specs in a tough situation.

[0.055 lb] I’ve been looking at this cable since it was announced, very curious on how the mdrx and cinetape integration works. It’s also very unclear to which version or models of cinetape it has to be, is it Cinematography Electronics, cinebug or Arri so to answer some questions. This works with the C. E. Cinetape original and cinetape 2 although still unclear about the other models it works with the original cinetape makers. This is a direct connection from the mdrx aux 1 port into the cinetape’s remote port. It’s very easy to set up and depending on the condition of your cinetape works extremely well and awesome paired with the ctrl 1 or 3 hand units and small hd monitors.

[0.055 lb] This audio signal booster works just as advertised. We mounted it in a gator case with a wireless mic system and have been using it for our mobile productions. When we have a long run to our production truck, this booster adds the gain we need for the distance and cleans up any noise. It gives us a clean signal and boosts it up to 25 db's. But it can be used anytime you need some additional db's or to ensure a clean, strong signal. This signal booster runs on phantom power which makes it easy, but doesn't pass on the phantom power, so you can use it with passive dynamic mics or mics that are battery powered without any issues. It has 4 XLR inputs and outputs, which is more than enough for our needs. This also eliminates any chance of picking up noise/interference from electric cables or lighting equipment. That is fantastic and helps with peace of mind during a production and especially during a live event. This booster is also well-made. It comes in a steel housing and the locking XLR connectors seem to be made of quality materials. The cables lock in and unlock easily but are still secure. Again, we store it in a gator case because this booster is rack-mountable (which I also love), but it is built well enough to be on its own if you don't have a rack to mount it. This booster has been a great addition to our workflow. It provides a strong boost in db levels, eliminates interference and is simple to set-up and use. And it is built to last. I'm very impressed and happy with it. [I have received this product in exchange for my honest review]

[RP-SMA] A while back I bought a KVM for my various systems and several Raspberry PIs. The HDMI didn't work for the PIs. I thought it was a problem with the KVM. I saw online that someone suggested boosting the HDMI signal, so I bought this. I plugged it in between the monitor and KVM and it did the trick. All my PIs now have HDMI. I didn't need the 5v power supply.

[RP-SMA] Good replacement antenna. No issues.

[0.055 lb] PURCHASED SEVERAL TO EXTEND. OVER 2 YEARS THEY STILL HOLD VERY GOOD

[RP-SMA] Have non-amplified antenna in the attic - and that line is split 3 ways. The 2 smaller TVs weren't dropping 2 channels, but the larger TV with Samsung HDTV tuner, loses 2 channels every minute or so with weak signal. After installing the Winegard - no more weak signal on the one channel. The other channel is very watchable now with less drops. Very satisfied.

[0.055 lb] Been having this for 3 years non stop, and been working GREAT. Never had to even use the DC connector , cause both Hdmi bring in enough power to power on the device and boost connectivity. Video output crystal clear.

I think today Bought 4 or 5 units.
Will definitely recommend

[0.055 lb] Had a little hiccup with original order but it was resolved and these are exactly what I needed.