Transmit high-definition video over 3 miles (line-of-sight) from your DJI drone or gimbal gear with this DJI Transmission Standard TX/RX Combofrom DJI. The transmitter pairs with a separately available monitor/receiver and transmits up to 1080p60 video using the highly efficient O3 Pro transmission technology via Wi-Fi 2.4 and 5 GHz frequencies. Optional high-gain antennas can be purchased to boost the signal quality and distance.

The transmitter supports automatic frequency hopping to find the strongest signal, and it operates using AES 256 encryption to protect your video from prying eyes. It allows you to transmit simultaneously to two receivers in control mode, and in broadcast mode, it can transmit to unlimited receivers with a slightly lower performance. The transmitter can be powered via an optional L-series battery, WB37 battery, or its DC power input, or it can be powered directly from a DJI gimbal such as the Ronin 2 or RS 3.

Video Transmitter & Receiver System    WB37 Batteries, Plates & Charger    L-Series Battery Plates    Power, SDI & USB-C Cables    Includes Carry Case

DJI Transmission incorporates O3 Pro video transmission technology, which offers an incredible 20,000' on-ground transmission distance. It also supports transmission at 1080p60 with a max bitrate of 50 Mb/s as well as live audio monitoring at 16-bit 48 kHz, providing crews on large sets an excellent remote visual and audio monitoring experience.

The video transmitter and receiver use the same chip solution as Ronin 4D, with every link explicitly optimized to provide end-to-end ultra-low transmission latency when pairing with cinema cameras like the ARRI ALEXA Mini LF.

• O3 Pro adds a DFS band on top of the traditional 2.4 and 5.8 GHz, offering up to 23 channel options that provide professional crews with more compliant and interference-free transmission channels.
• DJI Transmission supports triple-band automatic frequency hopping, which automatically scans the electromagnetic environment for the best wireless channel.
• With a built-in frequency sweeper, users can even manually select a channel to avoid interference between devices.
• By mounting high-gain antennas, transmission capability is further boosted.

• Two transmission modes are available.
• In Control mode, DJI Transmission delivers optimal transmission performance. Monitoring can be done from two receivers at the same time, while the gimbal of Ronin 2 and RS 3 Pro and camera can be controlled remotely.
• Broadcast mode can be enabled on top of Control mode to enable an unlimited number of receivers (transmission performance differs from Control mode).
• On larger and more dynamic, DJI Transmission can operate with 20 or more transmitters sending signals to 20 or more devices, resulting in a smooth, coordinated experience that's difficult to get with traditional transmission setups.

DJI Transmission supports linking and AES 256-bit encryption to avoid leaks of confidential information. Together with DJI's self-developed chip and transmission protocol, DJI Transmission is able to ensure security of your footage.

Related Questions and Answers

Q: 1. Can the high-bright DJI monitor be used for two transmitters at the same time for A cam and B cam?

A: You can only connect the display to a single transmitter when using the DJI Transmission Standard TX/RX Combo. The DJI High-Bright Remote Monitor display would only accept one input at a time.

Q: 2. can this be used to live stream events?

A: The DJI Transmission Standard TX/RX Combo cannot live stream directly from either unit to the internet. You would need a capture device such as the LiveU Solo SDI/HDMI Video/Audio Encoder, BH #LILUSOLO, in order to live stream to the internet.

Q: 3. Can this be used to get complete remote control of image and movement of a "DJI RS 4 Pro Gimbal" with a "Sony a7R V" on it?

A: The DJI Transmission with High-Bright Monitor Combo does support full remote control of the DJI RS 4 Pro Gimbal Stabilizer (B&H # DJRS4P), but the remote control ability of the Sony a7R V Mirrorless Camera will be limited (B&H # SOA7R5). You can see a list of supported camera controls via the following link: https://bhpho.to/4caXz60.

Q: 4. How quickly can the receiver switch link from one transmitter to another?

A: The DJI Transmission Standard TX/RX Combo receiver can switch very quickly.

Q: 5. Does this work with the "DJI Ronin 4D 4-Axis Cinema Camera 8K" (BH #DJRONIN4D8K) in a full featured way?

A: Yes, the DJI Transmission with High-Bright Monitor Combo, is designed to work with the DJI Ronin 4D 4-Axis Cinema Camera 8K with full compatibility.

Q: 6. When paired with the RS3 Pro and LiDAR module, will the DJI Transmission show a 3D plot of focus points like the Ronin 4D does?

A: No, At this moment the DJI LiDAR module does not support the waveform though the DJI DJI Transmission Combo.

Q: 7. Can the Transmitter be connected to the "Deity Microphones TC-1 Wireless Timecode Generator Box / BH #DEDTT0272D80"?

A: The DJI Transmission with High-Bright Monitor Combo does transmit time code. You could connect it with the following cable. Deity Microphones C15 Right-Angle Locking 3.5mm TRS to Right-Angle BNC Timecode Cable BH #DEDTS0272D62

Q: 8. Do you have to use the DJI high bright monitor w/ receiver for this to work or is this a stand alone system?

A: DJI is releasing the DJI Wireless Video Receiver, which will be released soon, to be connected to the DJI High-Bright Remote Monitor, where the pair can then be used to separately operate.

Q: 9. How many Transmitters can attach with one receiver ?

A: The DJI Transmission Combo allows for one transmitter per receiver, however, unlimited receivers will work with a single transmitter based on the specific transmission mode selected.

Q: 10. Are record flags transmitted with these?

A: No, recorded flags remain native to the recording on the camera and are not sent over the DJI Transmission Standard TX/RX Combo.