The Neewer GM002 Heavy-Duty Video Fluid Headfrom Neewer GM002 Heavy-Duty Video Fluid Headis made of aluminum and supports up to 13.2 lb. Instead of the traditional way, the quick release plate inserts directly from the top, allowing for more efficient switching between tripod and gimbal shooting. This head has a 75mm flat base with a 3/8"-16 thread on the bottom, and a 3/8"-16 to 1/4"-20 adapter is included. A telescopic handle and an L-shaped hex key are also included.

75mm Flat Base    3/8"-16 Bottom Thread & 1/4"-20 Adapter    Top Mount Quick Release Plate    13.2 lb Payload    1/4"-20 & 3/8"-16 Top Mounts    -70/+90° Counterbalanced Tilt    360° Pan    Bubble Level

Related Questions and Answers

Q: 1. Is the head removable/able to swap?

A: Yes it is removable but the base of the tripod is an uncommon size (60mm). Most video heads are 75mm or 100mm. If you would like to swap the head you would need to find another 60mm video head.

Q: 2. I know The SmallRig AD-01 The SmallRig AD-01 Tripod head has a fixed counterbalance. But can the spring inside be removed?

A: The SmallRig AD-01 Heavy-Duty Tripod with Fluid Head (B&H# SM3751) does offer a counterbalance mechanism, but it's not especially strong, and in our opinion it would be very unlikely to be bothersome to anyone. As you mentioned, the counterbalance cannot be changed. The head is not designed to be taken apart, nor the spring removed.

Q: 3. Can you remove the head from the 60mm half ball?

A: Yes by removing the tie down you can remove the head from the tripod. The 60mm ball of the is not removable to make the Viltrox VT-01 head a flat head. It will only connect with 60mm ball mounts.

Q: 4. max working height?

A: Max height is 5.5 ft.

Q: 5. Can the panhandle angle be adjusted?

A: Yes, the SmallRig AD-01 has an adjustable panhandle that will allow you to angle the handle to your preference.

Q: 6. Do all three legs have to be adjusted to the same height or can 1-2 legs be set to a different height?

A: The legs do not have to be adjusted to the same height.

Q: 7. The size of the Hot Shoe is the same as the manfrotto?

A: The SmallRig AD-01 Heavy-Duty Tripod with Fluid Head (B&H# SM3751) will accept the Manfrotto Manfrotto 501PL Sliding Quick Release Plate with 1/4"-20 Screw (B&H# MA501PL): https://bhpho.to/3hbQ201

Q: 8. Can you use this tripod with an universal dolly such as the magnus dwf-2?

A: Yes you will be able to use the Viltrox Video Tripod with a universal dolly, such as the Magnus DWF-2.

Q: 9. Can the feet come off?

A: Yes. The feet can come off this tripod system. The Viltrox VX-18M Heavy-Duty Video Tripod with VT-01 Fluid Head BH #VIVX18M • MFR #VX-18M

Q: 10. Is the tri-bar that holds the legs together at the bottom removable?

A: The mid-level spreader on the SmallRig Heavy-Duty Video Tripod, Fluid Head, and Dolly Kit is not removable.