Trendnet 16-Port Gigabit Poe+ Switch Tpe-1620Ws

Trendnet 16-port Gigabit Poe+ Switch Tpe-1620ws

Product Code: eq13421
Availability: In Stock

$989.97 $1,356.26

Qty

16 reviews Write a review

Description
Reviews (16)

The TRENDnet 16-Port Gigabit PoE+ Switch TPE-1620WSfrom TRENDnet 16-Port Gigabit PoE+ Switch TPE-1620WSdelivers a 32Gb/s switching capacity with sixteen PoE+ Gigabit ports and two shared SFP slots. This IPv6 ready switch offers advanced traffic management, troubleshooting, security, energy savings with GREENnet technology, and monitoring features at a reduced cost.

This device supports a broad range of network configurations, including 802.3ad link aggregation, asymmetric VLAN, 802.1Q VLAN, Voice VLAN, GVRP, 802.1p Class of Service (CoS), and Quality of Service (QoS) queue scheduling. Furthermore, real-time traffic comparison charts, error group charts, and a convenient cable diagnostic test aid in rapid troubleshooting.

16 x Gigabit PoE+ Ports 2 x Shared SFP Slots 32 Gb/s Switching Capacity Supports IPv6 Configuration Traffic Management Rapid Troubleshooting 8 Mb Ram Buffer 23.8 Mp/s Forwarding Rates Rackmountable LED Indicators

Key Specs
Inputs/Outputs	14x RJ45 Gigabit Ethernet PoE+ (30 W, 802.3at) 2x RJ45/SFP Combo Gigabit Ethernet
Stackable	No
Switching Bandwidth	32 Gb/s
PoE Power Budget	185 W
Parameters
Stackable	No
Protocols
Supported Protocols	Head-of-Line (HOL) Blocking IGMP Snooping Link Aggregation Port Mirroring
Queuing	Strict Priority, Weighted Round Robin (WRR)
Jumbo Frames Support	10,000 Bytes
MAC Address Table Size	16K
Multicast Groups	256
Security
Security Features	DHCP Snooping DoS Attack Prevention RADIUS Authentication
Performance
Forwarding Rate	23.8 Mpps
Switching Bandwidth	32 Gb/s
Packet Buffer	8 Mb
Computer
Flash Memory	No
Electrical
PoE Power Budget	185 W
Power Draw	198.00 W (Active)
Input Power	100 to 240 VAC, 50 / 60 Hz
General
Certifications	No
Rack Mountable	No
Dimensions	17.3 x 9.9 x 1.7" / 44 x 25.1 x 4.4 cm
Weight	8 lb / 4 kg
Packaging Info
Package Weight	10.15 lb
Box Dimensions (LxWxH)	20.4 x 14 x 4"

The rackmountable housing features sixteen Gigabit PoE+ ports (automatically supplies PoE+ (30W) and PoE (15W)) and two shared SFP slots

This switch supports IPv6 configuration and neighbor IPv6 discovery

It supports a broad range of network configurations, including 802.3ad link aggregation, asymmetric VLAN, 802.1Q VLAN, Voice VLAN, GVRP, 802.1p Class of Service (CoS), and QoS queue scheduling

Real-time traffic comparison charts, error group charts, and a convenient cable diagnostic test aid in rapid troubleshooting

Features such as ACL, SSL, MAC/port filtering, 802.1X, TACACS+, and RADIUS are compatible with layered security controls

RMON, SNMP, SNMP trap, and port-mirroring support administrator monitoring solutions

The GREENnet technology helps to save energy up to 70%

Related Questions and Answers

Q: 1. Is this product (Version v1.0R) or (Version v2.0R)? Version v1.0R has DC power input, but Version v2.0R has AC power input. TKS!

A: The TRENDnet TPE-117GI Gigabit PoE+ Injector (BH # TRTPE117GI) version v1.0R) has been discontinued. It has been replaced by the TPE-117GI (Version v2.0R) which is we are offering.

Q: 2. Could this be used to power a Panasonic AW-HE40SW camera? (B&H # PAAWHE40SW)

A: Based on the specifications, Yes, it should power the camera.

Q: 3. Will this work on 2.5GbE links?

A: Yes, the TRENDnet TPE-319GI 10G PoE++ Injector should be backward compatible with 2.5GbE internet speeds.

Q: 4. Will this device power the new ubiquiti 48 volt cameras? UVC-G3-AF?

A: Hi Tony! Thanks for your interest in TRENDnet! Yes, this device will power the new ubiquiti 48 volt cameras. Hope this helps! If you have any more questions, you can always respond directly to this thread and someone will be happy to try and help answer any additional questions you may have! Have a great day! Adrian TRENDnet CS

Q: 5. Can you turn off EEE?

A: Energy Efficient Ethernet is always enabled with this Netgear 16-Port Gigabit Ethernet PoE+ Unmanaged Switch and cannot be disabled.

Q: 6. how does the switch get its data to distribute to devices?

A: You would plug your router/modem in to 1 of the 8 ports and up to 7 other devices in to the remaining ports.

Q: 7. Is this Version v1.0R or Version v2.0R? It appears from the pictures to be the v1.0R which TRENDnet says is discontinued.

A: We no longer have the V1.0R. It has now been updated to the V2.0R.

Q: 8. I am look at hard wiring 4 trend-net ip camera to a computer. Will this box allow be to do that? and access the IP address of each camera?

A: Yes, it will work. I'm not familiar with the IP cameras, but I would think that you'll need POE injectors to power the cameras using this switch. You other option would be to purchase a POE switch, which would provide the necessary power to the cameras.

Q: 9. Hi. I won’t need the power supply if I just need to extend a POE signal. Would I?

A: Yes, you would still need a power supply. We do offer other alternatives if you are looking to just extend POE without power.

Q: 10. What firmware version is on this switch? I see alot a sales of the version 1.0R which is obsolete by Trednet.

A: Unfortunately we are unable to check the serial, batch, firmware or OS version of a item before it ships.

Timothy	25/09/2024
[10,000 Bytes] It works, it moves a Gbit/s of data, and it powers my EAP 660 HD. 5

Thomas	17/09/2024
[10,000 Bytes] I use this to power PoE IP cameras and it just works. I was pleasantly surprised to find it has an internal power supply and not an external brick! 5

Sung Jae	24/08/2024
[10,000 Bytes] Used this for Aeronet 1562i. Perfect!!! NO need to buy original Cisco POE+ injector 5

Adam	22/08/2024
[256] Used for POE security cameras, which worked great! 5

Austin	19/08/2024
[20.4 x 14 x 4"] Using these to power two Panasonic UE150 ptz cameras. I should have bought these the first time around... The first no-name brand POE injectors I bought were not negotiating POE with the cameras correctly, despite being rated 90w. These worked first try and stay cool during operation. Nicely constructed as well. 5

Dennis	11/08/2024
[10,000 Bytes] I purchased this POE switch for a camera system. There are 4 cameras that are connected to a NVR thru an access point (bridge mode). I used this to power the cameras and feed the antenna. The switch has a 48vdc power supply. Works like a charm. 5

Sung Jae	27/07/2024
[20.4 x 14 x 4"] Bought this for Aeronet 1562. Perfect and stable Better than OEM Cisco that cost hundred bucks 5

Ron	26/07/2024
[8 Mb] I purchased these to power some meeting room scheduler enclosure I purchased. They work well easy to set up especially now that both ports are on the same side. I have the older version that does not but, they are still working too. I have had the older ones for 4 + Years. Great Solid Product. I am a IT Global Operations Manager for a Corporation and I have always used these since they have come out. 5

Joe	15/07/2024
[20.4 x 14 x 4"] I needed to power 2 Trendnet security cameras and connect them and a PC to a network. Accommodated all perfectly and easily. 5

Brett	28/06/2024
[10,000 Bytes] This injector solved an issue with the Eero POE wall mount. Other injectors couldn't provide enough current. This one worked great. 5