In a 54" x 150' roll designed for indoor use, the Drytac Interlam EcoGloss Laminating Film 54" x 150' Rollis a clear gloss laminating film with a permanent, clear, pressure-sensitive aqueous adhesive. It has a 1.6 mil thickness and a 75 gsm single-side PE-coated Kraft release paper. The film is certified for indirect food contact.

Clear Gloss Laminating Film    For Indoor Use    Permanent Pressure-Sensitive Adhesive    1.6 mil Thickness

• 1.6 mil gloss polypropylene film
• Certified for indirect food contact
• Permanent clear pressure-sensitive aqueous adhesive
• For indoor use only
• 75 gsm single-side PE-coated Kraft release paper

Related Questions and Answers

Q: 1. Can this film be used in a Kodak M35?

A: The Film Photography Project Low ISO Color Negative Film (35mm Roll film, 24 Exposures) is meant for use in SLR cameras that allow for manual exposure and bulb mode. It cannot be used on the Kodak M35 point and shoot. The M35 is made for more standard films in the 100-400 ISO range.

Q: 2. Is there a 18" reel holder for this?

A: The tube is made to accept the film still on the reel so essentially the reel itself is the holder. It can fit up to 10 reels of 35mm film.

Q: 3. Is this DX coded? (I'm want to use it in a point-and-shoot).

A: No, the Flic Film Vision3 250D Cine Film (35mm Roll Film) does not have the DX encoding. However, you can still use this film on a point and shoot film camera.

Q: 4. How many frames?

A: The Flic Film Vision3 250D Cine Film (35mm Roll Film) has 36 frames.

Q: 5. will this accept both the Paterson type and stainless reels?

A: YesI use it for plastic reels, and the stainless are always smaller, so it should be good for both.

Q: 6. How is this normally applied to the glass surface once the print is made? Is it common to be sandwiched between two surfaces or just applied to the outside of the surface? I assume this works well with my Epson 7900 printer.

A: Normally it would be Plexiglass but regualr glass can be used instead. It is compatible with the Epson 7900 printer.For a rigid, durable backlit display, laminate this media and mount it to Plexiglass with an optically clear mounting adhesive. A low-glare front laminate is desirable to reduce reflections in brightly lit areas.In view boxes that have PLEXIGLASS in them already, mounting is not necessary, and a thicker (10-mil) surface laminate may offer enough rigidity for the print to lay flat. For extra rigidity or for larger displays, laminate the back of the print with a laminate equally thick as the front material.

Q: 7. Does it fit the epson inkjet T5170 printer?

A: Yes, this roll of paper is compatible with the Epson Inkjet T5170 since the roll of paper is 36" wide, 2" in its core, and 8 mil in thickness.

Q: 8. Will this film work with the (very) vintage Kodak Vest Pocket camera?

A: Yes, the ReraPan 400 Black and White Negative Film (127 Roll Film) will work with the Vest Pocket Kodak camera.

Q: 9. Does this have the anti-halation remjet layer on it?

A: Yes, Flic Film Vision3 250D Cine Film has the Remjet anti-halation backing.

Q: 10. Is there any difficulty in using this Doran Vacuum Action Roll Film Washer for 120 film?

A: There should be no difficulty using this item. After processing, you'd leave your film on the roll, fill it with water, then let the water run as it drains out the front. The thing that has proven to be difficult about most film washers has been the faucet connection, but in the description, it even mentions it's easy to do with most faucets. If your faucet falls under the category of not being easily compatible, a quick visit to a hardware store should solve the problem.