Made for narrower, subcompact handguns, this Holosun EPS Carry Pistol Sight Red 6 MOA Dotfrom Holosun EPS Carry Pistol Sight Red 6 MOA Dotfeatures a red, 6 MOA dot reticle and a multicoated, aspheric lens for clear and unobstructed targeting at close and long ranges. Built with 7075 T6 aluminum, the sight is compatible with most factory iron sights and comes with an RMSc-to-K footprint adapter for added compatibility. The sight's red Super LED is powered by a 1620 battery, providing eight daylight brightness levels and four night-vision settings, and delivering 50,000 hours of battery life.

For Concealed Carry and Personal Defense    Compatible with Most Factory Iron Sights    Red Super LED 6 MOA Dot Reticle    1x Magnification; Parallax-Free    50,000 Hours of Battery Life

• 1x magnification is ideal for close-quarters engagement
• Unlimited eye relief when using both-eyes-open shooting techniques allows for complete situational awareness
• Aspheric lens and multiple layers of antireflective coating on all optics ensure bright and clear views through the sight window

• 6 MOA aiming dot for close-range shooting
• 8 brightness settings, including four suitable for night vision gear
• Shake Awake technology with last setting recall

• 1.5 MOA adjustment per click impact point correction
• +/- 30 MOA windage and elevation adjustments

• Durable matte black 7075 T6 aluminum housing
• IPX8-rated shock, fog, and waterproof
• Included RMSc-to-K footprint adapter plate
• Runs on one included CR1620 battery

Related Questions and Answers

Q: 1. Is that a 1/4 by 20 for a monopod or tripod use?

A: Yes, the Vello CB-800 Universal Pistol Grip with Shutter Release has a 1/4"-20 female threaded socket on the bottom of the grip for a variety of mounting options.

Q: 2. Does this also control the start/stop for video? Thanks.

A: Yes, this can be set up to start/stop video as well.

Q: 3. Will this fit a Boya BM 6060L with a dead cat?

A: Yes

Q: 4. Will the Rode PG2-R work with Sennheiser MKE 600? Also with MZH Windsheild attached

A: Hello Jeff, yes, it appears that the diameter of the MKE 600 will work with the PG2-R with and without the windjammer.

Q: 5. Is this useful for 2 short microphones in an ORTF setup on the one mount?

A: The Rode PG2-R Pistol Grip Shockmount is not useful for 2 short microphones in an ORTF setup on the one mount.

Q: 6. Is there a similar product with a higher payload capacity? I would like to use my Olympus e-M10 with the 100-400 lens. Thanks!

A: There is Barska ACCU-Grip Camera Handle Pistol Grip (B&H # BAAPGHS), which doesn't specify the payload capacity. It would really be a matter of what payload is comfortable for you. The Barska grip would be sufficient enough to support the Olympus OM-D E-M10 Mark IV Mirrorless Camera (B&H # OLEM10M4B) and the Olympus M.Zuiko Digital ED 100-400mm f/5-6.3 IS Lens (B&H # OL100400B). Another more rugged option would be the Novoflex Q-Griff Arca-Compatible Hand Grip (B&H # NOQG), which uses an Arca-Type plate system.

Q: 7. What is the maximum payload capacity of the Barska Accu-Grip?

A: There is no max payload specified however the grip is built quite well and it would be more so a matter of what payload is comfortable for you.

Q: 8. Will this device trigger the Olympus TG-6?

A: I'm sorry, no, your camera does not take a remote cable.

Q: 9. Can the top plate with the lyre shock mounts be unscrewed from the pistol grip? And if so, are there any other mounting points below the plate (like a 1/4" thread) that could be used to mount it to a friction arm and placed on a camera?

A: This is intended to be used as one piece. You may be looking for something more like this: https://www.bhphotovideo.com/c/product/1273122-REG/rode_sm4_r_suspension_shockmount.html

Q: 10. Are there replacement shock mounts for this if one breaks?

A: Yes, Rode does sell replacement parts and they do have a replacement for the shock mount on the PG2-R. The part is not available to purchase through retailers, so you will need to contact Rode directly in order to get a replacement. You can reach customer support at Rode by phone at 562-364-7400. Their US office is based in California.