Designed to connect to virtually any device, the hi-gloss white Audioengine A2+ Wireless Bluetooth Speaker System with Standsprovide an analog RCA stereo input, 1/8" input, and Bluetooth connectivity with aptX HD for wireless connectivity with your compatible devices. The speakers consist of a 2.75" woofer and a 0.75" tweeter and output up to 15W per channel RMS, or 30W per channel peak.

For your convenience, all connectivity is via the powered left speaker, which connects to the passive right speaker with the included speaker wire. The speakers are magnetically shielded, allowing for placement near your TV or other sensitive devices.

30W RMS / 60W Peak Power    Bluetooth 5.0 Wireless Input    2.75" Aramid Fiber Woofers    0.75" Silk-Dome Tweeters    USB, RCA, 1/8" Audio Inputs    Stereo RCA Audio Output    65 Hz to 22 kHz Frequency Response    Integrated CSR8670 DAC    15° Tilt with Stands    Stands Constructed from Steel

The A2+ Wireless speakers can connect to nearly any Bluetooth source, so you can wirelessly play your favorite apps like TIDAL, Spotify, Pandora, and more. The Bluetooth receiver built into the A2+ Wireless features aptX HD coding for enhanced quality with compatible devices. aptX HD is also backward-compatible with the SBC and AAC codecs, so you can enjoy audio from nearly any Bluetooth-enabled device. Further, the A2+ Wireless has a Bluetooth range of up to 100' with virtually no degradation in audio quality.

These speakers feature acoustic and electrical designs to help provide enhanced bass without using digital signal processing or bass boost circuits.

There's no network to set up or passwords to create; simply plug in or pair your source device and enjoy.

The cabinets, drivers, bass port designs, amplifiers, and crossovers are all tuned together to help create an efficient system that requires less power than passive speakers and a separate integrated amplifier or similar A/V components.

With all the electronics built into the left speaker, it's easy to connect your source device of choice. All the circuit boards for the power and preamp sections are vertically mounted for augmented mechanical shock protection.

The A2+ Wireless speakers use ferrofluid-cooled, silk-dome tweeters with neodymium magnets. The tweeters are engineered to hold up well under high power, and the edge-driven design helps provide smooth response. The aramid-fiber woven-glass composite helps the woofers retain their shape when being driven at high levels.

Both of the A2+ Wireless speakers are magnetically shielded, so you can place them near your display or other sensitive devices.

• Integrated CSR8670 DAC
• Output current limiting, thermal over-temperature, and power on/off transient protection
• RCA and 1/8" inputs provide easy connection to nearly any audio source, including a turntable or TV
• Variable RCA output for subwoofer connection
• 0.75" thick MDF cabinets
• 1/4"-20 threaded brass inserts on the bottom enable attachment to floor stands or wall mounts

Related Questions and Answers

Q: 1. Do these speakers have only wireless connectivity? Or can an auxiliary cable connection be used (USB or 3.5mm cab le)?

A: These speakers can only connect wirelessly.

Q: 2. Can I use this with iTunes on my iMac?

A: It is a digital blue tooth receiver. It's an excellent product.

Q: 3. Can I fit two Hercules MS201B Microphone stands with bases?

A: Yes it can fit. The dimensions of the bag are:48.8 x 9.6 x 6.0 The dimensions of the stand when it's folded are:Folded: 35.8 x 10.5 x 1.4 The dimensions of the base of the stand are:Radius: 4.7

Q: 4. Is there a way to get 2 of these and have them pair wirelessly to each other to have a Wireless Stereo PA system?

A: You can link 2 Samson Expedition XP310w speakers together using a wireless system for active PA speakers like B&H # ALSTEALTHWRL for example.

Q: 5. Is there anything besides an extended range, that makes this receiver more accurate in conveying signal to a stereo system? What is it about this that makes it better than other receivers?

A: The Bluetooth version and the codec along with the DAC used makes this one among the best receivers we carry.

Q: 6. The 5V-DC port looks like a micro USB, is this correct? And does it come with a power adapter or do I need to supply one?

A: You are correct it is a micro USB connector and it does come with a USB power supply and cable

Q: 7. I have two receivers/amplifiers, one to power speakers inside and the other to power speakers outside and they are connected so they can play the same music at the same time. I would like to play music on my laptop and/or my tablet and/or an Ipod through this system without having to connect to either amplifier. Also, I'd like to be able to use outside or inside amplifier independently too so someone can be watching TV inside while music plays outside. Question #1 Do my amplifiers need to have a USB connection? Photos show USB connection on back of powered speakers. Question #2 Can the Audioengine be powered by a wall outlet instead of USB and be connected via RCA cables? Question #3 Would I need to buy two Audioengines to be able to use my two amplifiers independently? Just not sure how this all hooks up to achieve what I want to achieve.

A: Answers in order :1. Your Amp does not need a USB connection. If it has an USB connection maybe you could use it to supply power for one Audioengine receiver. It depends of the type of USB connector on the Amp. Check with your Amp. manufacturer. I prefer the to buy another power supply, read answer two.2. Yes, if you use an Audioengine wall adaptor, similar at the one that came with your kit. Audioengine sells that type of adapter as an accesory. You could buy it with this Code B&H # AUUSBPA.3. Yes you need to buy another unit, but only the receiver Code B&H # AUW3R. The reason is because I do not know your audio connection diagram. Maybe with the kit you have and if you operate your audio device in a master/slave situation and all your audio sources are connected to the master and if you select from that to activate the only slave or only the master or both, then you need only the kit you have. You have to connect the Audioengine receiver as a CD player or iPod connected direct by cable. Otherwise you need the last accesory I mentioned lines above and pair both Audioengine receivers to your Audioengine transmitter.NOTE 1 : The Audioengine transmitter should be connected to the source you want to play, like your iPod, notebook, tablet, celullar phone, etc NOTE 2 : English is not my maternal language, I tried my best to make this message to be understandable.

Q: 8. My Yamaha RX-V663 receiver does not have a USB output. What type of USB power adapter do I need to power the Audioengine B1 to be able to use it with my receiver?

A: it plugs into an ac wall outlet for power and then optical or rca input on receiver for the audio output

Q: 9. how many watts is this beats pill xl?

A: Some brands (Beats included) purposefully don't advertise that. Watts don't really matter, as google/the web will tell you if you want to get into it. I can say I didn't really ever expect to own a Beats product because I think they're mostly overhyped and expensive, but I tried a lot of speakers and none of them could deliver loud, low end without distorting like the Pill XL could. (Specifically, I wanted something that could handle my ubass). I agree with a lot of reviews that the overall sound is bass-heavy, but I still think they sound great for playing an ipod, and they are VERY loud. Battery lasts a long time and can charge devices.

Q: 10. Are these compatible with a new 2024 iMac ?

A: Yes, the Harman Kardon SoundSticks 4 Bluetooth Wireless 2.1 Speaker System, B&H #HAHKSNDSTK4W, are compatible with the iMac from 2024.