The HX-80N Series High Mount Outdoor Curtain Wireless Ready PIR Detector with Anti-Masking from Optex provides the stability and reliability necessary for an outdoor PIR sensor. This battery-powered model accepts most manufacturers' wireless transmitters, and allows installers to save valuable installation time and labor costs because no trenching, installing conduit, or pulling of wire is required.

The most important element in reliable outdoor detector is accuracy to distinguish a human being from a small animal. The pyro element on board enables this passive infrared detector to project a detection pattern, thus allowing for more accurate detection of human beings and less false alarms.

In addition, the detector's dual PIRs and 20 detection zones utilize the AND detection pattern technology; upper and lower detection areas have to be activated in order to generate an alarm condition. This technology helps to prevent false alarms caused by a pet or small animal. The detection length can be limited to avoid unwanted detection, and its short-range zones can be masked if needed. By limiting the detection range, false alarms due to unwanted movement (cars, persons, or animals outside the protected area) can be eliminated.

Intelligent AND Detection Logic    Double Conductive Shielding    Temperature Compensation Logic    Summer Night Compensation Logic    Vegetation Sway Analysis Logic    Active IR Digital Anti-Masking Function    Compatible with Wireless Transmitter    Flexible Detection Area Setting    Unique Pyro Element    Dual Signal Processing Logic

The most important element in reliable outdoor detector is accuracy in distinguishing a human being from a small animal. The pyro element on board enables the detector to project a suitable detection pattern, thus allowing for more accurate detection of human beings and less false alarms.

The detector coverage can easily be adjusted by means of built-in flaps and plates. To adjust the long range of detection, you can set the upper and lower flaps. To adjust the short range of detection, you can set the masking plates.

Not all outdoor ground is flat like most indoor environments. Steep slopes can cause negative effects on the catch performance feature. The included, adjustable bracket enables the detector to maintain the optimal catch performance.

The detector is a battery operated model that works with most manufacturers wireless technology.

Related Questions and Answers

Q: 1. will this unit record audio conversations as well as the video?

A: Only video is recorded.

Q: 2. HOW TO REPLACE 9VOLT BATTERY ?

A: Using a flat head screw driver you push down on the section that the sticker that says Push points to and separate the casing from the sensor. Take out the old 9V battery and replace.

Q: 3. Can the tablet work work while on the charger?

A: Yes, the screen is meant to be connected to a power supply in order for it to power up and work.

Q: 4. will this work as a replacement with a optex wireless 1000 chime system?

A: yes! it does work

Q: 5. is the td-20u compatible with my old wireless 2000?

A: Yes

Q: 6. Can the door station be mounted over an existing peephole if battery powered?

A: From what I saw in the installation video, it looks like it needs to be mounted on a wall like you would a doorbell or other WIFI video doorbells.

Q: 7. Sorry, is this item compatible with LG UltraGear 38GL950G-B 38" Curved 21:9 144Hz G-SYNC IPS Gaming Monitor?

A: The Ergotron HX Wall Mount Monitor Arm (White) BH #ER45478216 offers 75 x 75 to 200 x 200mm VESA Support and Supports Displays up to 49", 20 to 42 lbs. The LG 38GL950G-B features a VESA Mounting-Hole Pattern of 100 x 100 mm. and weighs in at 16.8 lbs. So they would be compatible.

Q: 8. hi wanted to know length covered need 14 pcs?

A: 40' - 180 degree.

Q: 9. can this be wired?

A: Yes, this needs to be wired. It cannot be wireless.

Q: 10. how do you replace the battery in a BX 80?

A: Instructions for changing out the battery can be found in the product manual at the following link: http://bit.ly/1OufWkr