Point Source Audio Series9 Omni Headset Mic With Lemo Connector

Product Code: eq134809
Availability: In Stock

$2,007.00 $2,468.61

Qty

8 reviews Write a review

Description
Reviews (8)

The brown Point Source Audio Series9 Omni Headset Mic with LEMO Connectorfrom Point Source Audio Series9 Omni Headset Mic with LEMO Connectoris designed to deliver clear speech and vocals in a miniature form factor with flexible mounting options. Dual earhooks can be freely adjusted to suit your talent, while a cable clip keeps the wiring concealed. Ideal for both live stage events and small studio setups, the microphone features an omnidirectional pickup pattern with IP57 rated electret condenser resistant to water, sweat, and makeup.

This Series9 microphone features a 20 Hz to 20 kHz frequency response and 142 dB SPL. A 3-pin LEMO-type connector is hardwired for select transmitters and other compatible devices. The 5.6' integrated cable bends 360° and allows for direct integration with compatible bodypack transmitters. A foam windscreen and storage box are also included.

For Broadcast, Film/Video & Presentation Omnidirectional for Consistent Levels For Select Transmitters with 3-Pin LEMO Headroom for Strong Vocals / 142 dB SPL Dual Earhook Headset Rugged 5.6' Cable Stays Pliable IP57 Rated Requires 1 to 10 VDC Includes Windscreen and Clip

Key Specs
Polar Pattern	Omnidirectional
Power Sources	Plug-In Power
Color	Brown
Microphone
Polar Pattern	Omnidirectional
Included Tone/Pattern Caps	No
Performance
Frequency Response	20 Hz to 20 kHz
Maximum SPL	142 dB
Sensitivity	-39 dBV/Pa (at 1 kHz)
Dynamic Range	104 dB
Connectivity
Analog Output	1x LEMO 3-Pin Male
Cable Length	5.6' / 1.7 m
Power
Power Sources	Plug-In Power
Operating Voltage	1 to 10 V
Physical
Color	Brown
Environmental Resistance	Water-Resistant (IP57)
Weight	0.6 oz / 17 g

Transmitter Compatibility: hardwired to work with Sennheiser SK, Lectrosonics SSM, Wisycom, and select Shure transmitters
Also works with many third-party wireless transmitters and portable audio recorders that are equipped to supply 1 to 10 VDC through a 3-pin LEMO-type connector

Related Questions and Answers

Q: 1. Will this work with the DigitaLIZA scanning masks?

A: Lomography DigitaLIZA Scanning Masks are too large to fit on the CineStill Film CS-Lite Camera Scanning Light Source with CS-Litemask.

Q: 2. Anyone know if I could get this converted to use with RJ-9 or a mobile device pinout?

A: You might need to contact Remote Audio directly or a qualified repair service.

Q: 3. can you record or use this as a mic for video meetings?

A: Yes. There is an output connection, which would allow a live audio feed to be included in a meeting.

Q: 4. What does the color on the side indicate. volume?

A: This is a list of the colors and their indications for the IK Multimedia iRig Pre HD.Status / Audio level LEDThe lower LED will show the audio signal level and the status of the unit as follow:LED Off: iRig Pre HD is not connected to any power sourceLED Bright Blue: iRig Pre HD is connected and a signal is present at the input of the channelLED Green: The input signal of the corresponding channel is lowLED Orange: The input signal of the corresponding channel is OKLED Red: The input signal of the corresponding channel is too highPhantom power LEDThe upper LED show the phantom power status:Off: Phantom power is offSteady Red: Phantom power is onLow Battery: When the battery level approach to be low, all the (turned on) LEDs will fast blink every 2 sec. When the battery is at a very low level the audio out is muted and the LED continuously blinks

Q: 5. can this be used as timecode input?

A: The RED DIGITAL CINEMA DSMC3 RED 5-Pin LEMO to 3.5mm Female Audio Adapter (11.3") can be used with a timecode device like the Deity Microphones TC-1 Wireless Timecode Generator Box (Bluetooth, 2.4 GHz) to accept LTC timecode from the 5-pin port on the camera bodies themselves.

Q: 6. Can you monitor while recording?

A: You can monitor from this device while recording. If using an app with a monitor return, then the audio will be processed and returned out the headphone output. If using an app without an audio return, then the Direct Monitoring feature of this device will allow you to hear the audio input, before being sent to the app.

Q: 7. Will this work with the ANMEGA2-U2 Anchor Audio Portable PA system?

A: The HBM-LINK Cardioid Headset Mic can be used with Anchor Audio's WB-LINK Wireless Beltpack Transmitter (B&H # ANWBLINK). The transmitter and mic can be used for wireless audio connection with the MEGA2-U2 Portable PA System. So the WB-LINK transmitter is required in order to use the HBM-LINK microphone and wireless mic system included with the MEGA2-U2 PA.

Q: 8. Will it work with the Negative Supply Film Carrier?

A: Unfortunately no. The CineStill Film CS-Lite Camera Scanning Light Source with CS-Litemask will not work with a Negative Supply carrier.

Q: 9. Will this work to stop phantom power from reaching my ribbon mic?

A: Yes. This product is designed to prevent phantom power from passing through it when connected in between a preamp and microphone.

Q: 10. can this be mounted to a 4x4 junction box?

A: The Shure MXWAPT2 2-Channel Access Point Transceiver with ANIUSB-MATRIX USB Audio Network Interface BH #SHWAPT2Z10US includes a mounting plate. It may be possible to mount it to a 4 x 4 electrical junction box. We do not recommend any modifications of this product however.

Luka	15/09/2024
[Omnidirectional] This intercom headset is fantastic for long shows (ie. concerts, presentations, etc.). I work as a freelance camera operator, and when running handheld it's very useful to be able to hear intercom in both ears. With the standard headset, you would have to wear an earplug and single muff headset. 5

Michael	26/08/2024
[1 to 10 V] Works great and is extremely comfortable. Better than the other head crushers out there. Only wish that the cable was a little longer. 5

Dominic	12/07/2024
[Brown] First thing Id like to mention, Ive used this headset for handheld camera operation on tv crews during some conventions and I dont own this headset(in the process of buying 1 for myself). And honestly I have no issues with it, its comfortable, its flexible, very reliable, and definitely wonderful when on camera. Now I do agree with the other review in that its practically not possible to hear anyone talking to you while wearing the headset with both ear buds in. But that tells me it does its job very well. I will say that when my grip is trying to talk to me when Im wearing this wonderful headset all I have to do is pop out 1 of the earbuds and problem of not hearing solved very quickly and its easy to put the in ears back in once out and they hold very well. Now with all that being said, I will say that for me personally this headset works very well, but each person that is using this type of gear has to find what works best for them individually. For those like myself that this headset works great, its a worthy product. for those that its not great for them, another product will be better. Hope this helps future buyers! 5

Ben	21/05/2024
[Plug-In Power] I'm extremely happy with my point source. The buds that come with it aren't my favorite but you can easily switch them out with Shure 215s without having to rerun the cable through the casing. 5

Michael	08/04/2024
[Omnidirectional] I work hundreds of TV crews yearly, and I was looking for a headset that could give be a better fit that didn’t squeeze the side of my head like traditional single / double muff headsets. This headset works great in almost any sporting event (regardless of the loudness of the area around me). At times, I do have to slightly adjust the fit around my ears, but it fits very comfortably. 5

Brodwarrior	06/04/2024
[Omnidirectional] I use it for calling spot lights in a live concert setting. Aside from not having to use the house head set. This headset is clear, comfortable and durable. Only downside being that is kind of expensive, but in this case you totally get what you've paid for. But gooD luck finding an rts adapter. 5

John	30/11/-0001
[Brown] I bought these because I was fed up with he cheap telex headsets provided by the various remote production trucks that never work. They are comfortable to wear on those long 18 hour days and you can hear everything despite the constant white noise being put out by engineering into the reply/edit room. I highly recommend these for anyone living/working inside a remote production truck! 5

John	30/11/-0001
[Omnidirectional] My biggest issue with traditional broadcast headsets were the usability, being the lack of it. By the end of a show, the headsets would barely stay on my head because I was hot and sweaty. This headset is fantastic. I don't have to worry about it falling of. I can run with a steadicam and not have to pick up my headset after the shot. Highly recommend this. 5