Connect your speakers with the Whirlwind NL4 Speaker Cable, a robust 2' SpeakON cable that provides reliable connectors and cables for professional speaker deployment. The cable is made from 12-gauge, 4-conductor SJ type wire. The NL4 connectors feature screw terminals, which have been soldered for extra stability. The cable includes a lifetime warranty.

12 AWG / 4-Conductor SJ Wire    Lightweight and Flexible    Screw Terminal and Soldered Connections    Lifetime Warranty

Related Questions and Answers

Q: 1. Does this unit require external power? if so, how much and on what kind of connector?

A: The Whirlwind Line Balancer/Splitter requires no external power and is designed to split a single line level input signal into two balanced line level outputs. A choice of two output configurations is provided: one direct output and one isolated output, or two isolated outputs. The Line Balancer/ Splitter uses Whirlwinds TRSP-600L transformer and has a frequency response of 20 to 20kHz, 1dB @ +2OdBm.On the Line Balancer/Splitter are two male XLR jacks, one female XLR jack, a 14 jack and three switches as outlined below:INPUTEither of the two input connectors, a female XLR jack or a 14 TRS jack (Tip = Pin 2 and Ring = Pin 3) can be used for connection from a line level source, balanced or unbalanced. Use only one input at a time.OUTPUTSThe male XLR output connectors can be configured in one of two ways. The ISOLATED OUT/SPLIT 1 is always transformer isolated and the DIRECT OUT/SPLIT 2 is either directly connected to the input or transformer isolated, depending on the position of the OUTPUT SELECT switch.OUTPUT SELECTThis push-button switch selects the output mode of the unit. In the out position, the DIRECT OUT/SPLIT 2 provides a direct output signal and the ISOLATED OUT/SPLIT 1 provides a balanced 600 isolated signal. In the in position (the center of the switch changes to orange) both output connectors provide a balanced 150 ?isolated signal that is attenuated by 6dB from the input.GND/LIFTSEach of these switches disconnects the ground between the inputs and the XLR outputs when set to the LIFT position. Grounds remain connected when set to the GND position.This product is warranted to be free of defects in materials or workmanship to the original purchaser for a period of 3 years from the date of purchase.

Q: 2. Does this pass phantom power through?

A: Yes. All three styles of Whirlwind MicMutes will pass phantom power for use with condenser type microphones. Thank you.

Q: 3. is the connection with USB type B (1.0) compatible with 2.0,2.1? compatiable with USB type C using adaptor?

A: Yes. You can connect the included cable to a USB -C port, using an adapter like this: https://bhpho.to/2ZVqVWw

Q: 4. do you have to have a mixer to use this?

A: No. I use it to go from stereo 1/8 sources (like laptops and cell phones) to one or two XLR's that I then put into a mixer, personally. But you could plug your XLR's into a combo amp or whatever else you want.

Q: 5. Can I use this device as a splitter to make a backup recording on a Zoom H6 for example?I mean, I have a shotgun mic. I split the signal in two, put it in two inputs of the recorder... I don't want to use a Y because I could lose a lot of gain on the two outputs. Or do you have other devices that can do this? Or a good mixer (I mean affordable 300-500) to to team with the H6 that can do this? I plan to use it with a Shotgun AND a Lavalier. So 2x2 outputs. Thanks! ;)

A: This device is designed for line level signals only. Splitting a microphone signal is never a good practice as there will be signal loss and added noise. A mixer, not a splitter is the way to go. The Mackie Mix8 (B&H # MAMIX8) is an 8-channel compact mixer that features high quality components, a rugged metal chassis, and is designed for a variety of sound reinforcement applications. The mixer features two mic/line inputs with 48V phantom power, two stereo 1/4 line inputs, and stereo 1/4 aux send and return. It is capable of accommodating dynamic and condenser microphones, keyboards, DJ setups, portable music players, and more.Each of the two mic/line inputs is equipped with XLR and 1/4 connectors, a dedicated 3-band EQ, aux send, pan, level control and an LED overload indicator. The two stereo 1/4 line inputs each feature an aux send, 3-band EQ, level control, balance control and also have an LED overload indicator. a href= http://bhpho.to/1sLQeDj target= _blank http://bhpho.to/1sLQeDj/a

Q: 6. Can you use an additional inline barrel pad on top of this in case you need to knock a signal down to mic level?

A: The output is already at mic level. The transformer gives you a 20 dB loss from -10 consumer line input to -30dB. If you need more, there is a built in 20 dB pad switch which takes your signal down to -50dB total. There is no reason or need to use an additional pad.

Q: 7. Will this work backwards? IOW take line xlr input to RS mini out?

A: No, the product is not designed to work in reverse.

Q: 8. Can I buy the power supply separate?

A: The power supply can be ordered from your dealer. it is model # PS12AC1A.

Q: 9. Where is the manual for these speaker?

A: Here you are: https://www.logitech.com/assets/47083/speaker-system-z313.pdf - Will, Logitech.

Q: 10. How do you plug this into a Behringer audio board? Could this work as a sideline reporter kit?

A: Should work and connect via the provided I/O:Mono In: 1 x 3-pin XLR femaleStereo In (L/R): 2 x 3-pin XLR female, balancedMic In: 1 x 3-pin XLR female Phone: 1 x 3.5 mm jack; 1 x 1/4 jackMic Out: 1 x 3-pin XLR male