Neutrik No2-4Fdw-1-A Opticalcon Duo Connector

Neutrik No2-4fdw-1-a Opticalcon Duo Connector

Product Code: eq13574
Availability: In Stock

$342.48 $417.83

Qty

10 reviews Write a review

Description
Reviews (10)

The Neutrik NO2-4FDW-1-A OpticalCon DUO Connectoris D-shaped, female, and works with both opticalCon and standard LC-Duplex connectors. The connector is dust and water resistant, achieving an IP65 rating when mated with a male connector, and using the included rubber gasket. Mounting the connector without the rubber gasket will save some space, but lowers the IP rating to 52.

It features a push-pull mechanism that has a built-in shutter with a silicone gasket that protects the optical connection from dust and dirt. It accepts standard LC connectors on the rear, which simplifies installation, and includes black, blue, and green color coded rubber seals that can be used to identify the fiber mode.

LC-Duplex Connector Compatibility IP65/52 Water/Dust Resisstance Rating Silicone Gasket Provides Dust Protection Push-Pull Locking Mechanism LC-Duplex Rear Connection Color Coded Sealing Mode Identifier

Electrical
Contact Resistance	< 7mΩ (inner)
Dielectric Strength	1.5kVDC
Insulation Resistance	> 2GΩ (initial)
Rated Current Per Contact	6A
Rated Voltage	50V Note: improved contacts to allow indoor camera routing applications (pollution degree 1, overvoltage category 1) acc. to IEC 60664 up to 240 V ac.
Ground Contact	Faston 2.8 x 0.5 (soldering possible)
Mechanical
Gender	Female
Insertion Force	< 45 N
Withdrawl Force	< 45 N
Lifetime	> 5000 Mating cycles
Locking Force	1000 N
Locking Device	Push-Pull
Mounting Direction	Front
Chassis Shape	D
Optical
Insertion Loss	< 0.4 dB/connection
Optical Connector	LC-Duplex Feedthrough
Material
Contacts	Bronze(CuSn6)
Insert	Polyamide (PA 6, PBT 30% GR, PBT 50% GR)
Shell	Zinc die cast (ZnAl4CU1)
Shell Plating	Black Chromium
Split Sleeve	Ceramics
Environmental
Temperature Range	-40 to 167°F (-40 to 75°C)
Packaging Info
Package Weight	0.07 lb
Box Dimensions (LxWxH)	4.5 x 3.6 x 0.5"

Related Questions and Answers

Q: 1. Does Neutrik make female in-line 2-pole Neutrik connectors? This is obviously a male.

A: I hope this is what you are looking for: a href= http://www.bhphotovideo.com/c/product/838670-REG/neutrik_nl2mp_speakon_2_pole_male.html target= _blank http://www.bhphotovideo.com/c/product/838670-REG/neutrik_nl2mp_speakon_2_pole_male.html/a

Q: 2. Does this have screw terminals or solder cups?

A: The Neutrik NL4MPXX speakON 4-Pole Male Chassis Connector does not have screw terminals or solder cups. It has 3/16" flat tabs.

Q: 3. this work with BH #NENE8FDXP6 ?

A: Yes, the etherCON Cat 6a Male Cable Connector is compatible with the Neutrik NE8FDX-P6 D-Shape Cat 6a Shielded Feedthrough Panel Connector.

Q: 4. What is the recommended AWG wire to use with this connector?

A: This is recommend for 16 AWG wire.

Q: 5. Is this connector compatible with Clear-Com?

A: Unfortunately no. This item BH #NENC6FXB is not compatible with anything. If what you are using outputs 6-pins then this connector would need to be soldered to the intended wire that same configuration. It will not just plug into an existing unit.

Q: 6. I am looking for the best wireless microphone for iPhone 8 Plus

A: Saramonic Blink 500 B3 Digital Wireless Omni Lavalier Microphone System for Lightning iOS Devices (2.4 GHz): B&H # SABLINK500B3: https://bhpho.to/3xpj0fN For Journalists, Vloggers, YouTubers Omni Lavalier Mic & Built-In Omni Mic Ultracompact Clip-On Transmitter Ultracompact 2-Channel Plug-In Receiver Lightning Connector for iOS Devices Easy to Use, Plug & Play Operation Adjustable Gain via Simple Buttons TX: USB-Rechargeable 5-Hour Battery RX: No Battery or Charging Required 18 Systems at Once Max, up to 164' Range

Q: 7. Which patch panel are these connectors compatible with?

A: You would use Neutrik NZP1RU-12 Angled Rack Panel with Twelve D-Shaped Cutouts (1 RU) (NENZP1RU12) or Neutrik NZP1RU-8 Angled Rack Panel with Eight D-Shaped Cutouts (1 RU) (NENZP1RU8).

Q: 8. Does this have OpticalCON Duo or Quad?

A: It's DUO.

Q: 9. This may seem stupid but is feedthrough meaning you can just connect cat5 or six cables on either end? no terminating?

A: Yes, the Neutrik NE8FDX-P6-B D-Shape Cat 6a Shielded Feedthrough Panel Connector (Black) BH #NENE8FDXP6B has a jack on both sides.

Q: 10. will these accept an 8awg wire? I am trying to use on a QSC PLD 4.5

A: Unfortunately it will not. According to the Manufacturer this works with wires between 16 - 12 AWG.

A Midwest Amature	25/09/2024
[Black Chromium] Excellent connector, designed to perfection. Easy to assemble and reliable. Using them for a long time, never failed. 5

Jake	03/09/2024
[1000 N] I did not realize that the Neutrik NL2FC was discontinued for some reason or another, but these connectors replaced them perfectly. They will take a heavy 12ga cable. The only problem now is they all look alike where the original 2 conductor connector had a specific look to differentiate from the others in the Neutrik catalog. 5

Aaron	29/08/2024
[D] Cable worked as expected. We use it for our field camera on football game days. We can move all over the field without a signal drop. 5

Jeff	28/08/2024
[1000 N] Used this in a tight hard to reach location. Works Great. 5

Fireplug	23/08/2024
[D] Professional accesories for the motion picture camera industry. I use Neutrik 4pin XLR connectors for all my power related projects. 5

southpaw	13/07/2024
[< 45 N] Fast service, great product 5

Morris	29/06/2024
[D] Great price, quick shipping and good communication. Well done! 5

Richard	23/06/2024
[1000 N] Excellent conductivity. I was using the cheaper speakon connectors in the past and used to get intermittent connection issues. This is no longer an issue after stepping up to Neutrik brand devices 5

Jogy	08/06/2024
[6A] Reasonable 5

Wilfredo	30/11/-0001
[Black Chromium] Well built. Nice tight connects. Making my own speaker wires is the best thing I done. These the one to get!! 5