You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Kolari Vision Pro Gen 3 Infrared Lens Filter 780nm 39mm

Kolari Vision Pro Gen 3 Infrared Lens Filter 780nm 39mm
  • Product Code: eq135849
  • Availability: In Stock

$239.97 $331.16

The 780nm, 39mm Kolari Vision Pro Gen 3 Infrared Lens Filter is fitted with precision machined brass rings, enhanced grip, and a superior lifetime warrantied construction while maintaining a low profile over your lens. This external infrared filter is perfect for adding to a full-spectrum conversion or on top of another infrared conversion to get a different effect. The filter features a hydrophobic AR coating that increases scratch resistance and causes dust, smudges, fingerprints, water, and even permanent marker to slide right off its surface with minimal effort. The brass ring construction features front and rear threading and an aggressive grip knurling for easier filter removal.

High-Transmission IR Glass    Anti-Reflective, Anti-Smudge Coating    Front and Rear Threaded Slim Brass Ring    Aggressive Grip Knurling

Parameters
Filter TypeKolari Vision 780nm Infrared
Exposure ReductionNot Specified by Manufacturer
Size39 mm Rear Filter Thread 
Front Accessory Thread / Bayonet39 mm
CoatingResistance Coated Only
Filter MaterialGlass
Ring MaterialBrass

Related Questions and Answers

Q: 1. So, this is NOT compatible with the KP camera model?

A: Unfortunately, the Pentax KP is not compatible with the Pentax Waterproof Infrared Remote Control.

Q: 2. Will the remote work from any angle to the K-1, i.e., in front of the camera, below the camera, to the side of the camera, etc.?

A: It requires line-of-sight in fairly close proximity. It works well within those limitations. The K1 has a receiver for the remote on both the FRONT and BACK of the camera so you have pretty good latitude. I use the remote and a tripod for rock solid performance with my K-1. :-)

Q: 3. Will this work with the Ricoh WG-5, B&H # RIWG5GB?

A: This remote is listed as compatible on the RICOH website. Their product number is O-RC1. It is also listed as an accessory on B&H. It is the remote listed on the Spec heading on B&H listing for WG-5 GPS/I have this remote, & it works great with a Pentax K3, I'm pretty sure it will work with WG-5, based on RICOH's page and B&H Page. Sorry I cannot be more solid in my answer, but I have no experience with the WG-5.

Q: 4. Is this IR Filter lens?

A: No, it's the opposite -- it lets IR light through rather than filtering it off.

Q: 5. Will this remote work through a glass window?

A: Yes if it is in line of sight at around 15 to 20 feet distance

Q: 6. what mount adapter would i need to use this on a gh4?

A: C-Mount to MFTYou can get it on ebay for $10 or less

Q: 7. Does this fit a Leica E39 lens?

A: Yes this fits Leica E39 Lenses.

Q: 8. Can this unit be powered through the edelkrone Power Module (B&H # ED81525)?

A: Yes, The edelkrone Power Module includes power cables that can be connected to the DC-In port on the Vision Module.

Q: 9. Will this accept 1080p HD signal? Or is it only 4k?

A: yes this will accept a 1080p signal

Q: 10. Does this lens take infrared picture or normal images? (I have seen review of this lens that takes normal images. is there a non infrared version of the lens?)

A: This lens records both infrared and normal wavelengths of light.Most lenses are not corrected for infrared light.Which means if you set the focus on your lens for normal shooting it will be blurred or out of focus for shooting infrared.If you likewise set the focus for infrared and try and shoot the next day in daylight it will be out of focus again.This because infrared light focuses at different points in the lens than all the other wavelengths of light.What THIS lens does is it keeps you from having to refocus everytime you switch from shooting in normal light to nighttime infrared aided light.This is done using a IR coating to make sure the the wavelengths of light focus on the same point in the lens barrel no matter if its IR or not.Hope that helps anserw your question.23

09/09/2024

[39 mm] Shoot aerochrome with you converted full spectrum digital camera. Works like a charm, just set your white balance and trees turn red but keeps the sky blue. No need to sit in front of your computer to swap channels.
Ensure that your lenses do not create hotspots. Some lenses can create spots in the centre of images.

5
15/08/2024

[Glass] Its almost magic. Se what your eyes can't see. Thats what this filter does in a full conversion camera, a tripod and a photographer capable of working with tools that are not for everyone. But if you pay what it costs and wait for it to be back ordered you are more than likely a committed photographer already. The filter can be used in a lot of scientific uses but I got it once I converted a full frame DSLR with still a lot of life ahead to full spectrum and got a very large set of filters to get the most of it shooting infrared and UV photography. So far it's been a great way to open new possibilities on creative photographic exploration.

5
11/08/2024

[Glass] After long ago exploring IR images with Kodak chemical films, I purchased the Kolari K665Pro and K720Pro to use on a stock Canon EOS 5D Mark IV and Canon lenses. I chose the Kolari Pro series for their sharp cutoff spectra as well as their filter coatings compared to Kolari's base series or Hoya. The Kolari Pro quality / performance / price point trade-offs were great IMHO. Starting with the 665, I set the camera for manual exposure (typically bracketing around +2) and manual focus (typically longer focus settings), and the stock sensors pick up enough red for good composition and control. It has been a short learning curve and I am most pleased with the images that the Kolari filters are generating: awesome black and white landscapes, cloudscapes, and waterscapes, and excellent starting points for post-processed color shots (native red hue or channel swapped)! No discernible color aberration until I push the image magnification to its pixel limits. The coatings have been great with tough lighting angles - no flares - and stay remarkably clean in windy, dusty environments! Continuing experiments with the 720, which pushes the limits of the stock sensors but still works well. Highly recommend the Kolari 665Pro for anyone getting into IR!!!

5
12/07/2024

[39 mm] Works great on full spectrum cameras. Lets you get into the deep infrared on 720nm or higher converted cameras.

5
03/07/2024

[Glass] Best high quality filter for my infrared photography. Very happy with it.

5
28/06/2024

[Glass] I’m new to IR photography. I’m using a Sony F828 with the magnet hack (Google it) & various external filters. I started with standard filters such as 720nm & 850nm but wanted something to pass more color for a more interesting twist. This 550nm delivers; it was worth the wait. It’s a lot of fun and making me enjoy photography again. There’s a lot of information out there about post-processing. Play with channel swapping (Photoshop channel mixer) to flex your creative muscles.

5
16/06/2024

[39 mm] I've been using the Kolari Vision IR Chrome Lens Filter on my IR full spectrum modified Sony a7iii with the 24mm G-Master lens. In order to achieve the vibrant red foliage colors with realistic blue skies and other colors, it is critical to have the correct custom white balance. At least with the Sony this required some experimentation as the usual gray card setting makes green foliage more orange than red (see photo), and this is very hard to correct in Lightroom. With my Sony, getting vibrant red foliage pushed the hues of other colors off a bit. Your experience may differ as I'm betting it's a function of the color algorithms in the specific camera being used. I did find that desaturating all color channels except blue can be any easy way to get b&w IR images with nice blue skies (see photo). Like all filters, plan to play with it a while to see how it affects your images under various circumstances.

5
11/06/2024

[Brass] Infrared takes a hole lot of experimenting. If you convert a camera I would say make a Full Spectrum Conversion. After that a full set of filters to se your options. This filter is one of the most user friendly filters you can get for it. Have fun with it if you get it.

5
29/05/2024

[39 mm] Best quality filters for my infrared photography!

5
22/05/2024

[Glass] I have only tested this filter on my Lifepixel-modified Canon R6 (v1), but I like it already. It produces some really interesting color combinations that my other Lifepixel IR filters do not. Samples below are with custom white balance in-camera.

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Products You May Like

Jbl Csma 2120 Mixer Amplifier For Commercial Use

$2,703.00 $3,378.75

Msi Rtx 3060 Ventus 2x 8g Oc Graphics Card

$779.97 $1,084.16

Hdmi 2.0 To Fiber Optic Transmitter With Sfp

$1,707.00 $2,048.40

Apantac Vga/usb Kvm Extender & Receiver Set

$1,012.50 $1,296.00