From EtherWAN, this is a Duplex LC Multi-Mode Non-Hardened Gigabit SFP DDM Transceiver, designed for a wide range of fiber applications and hot-pluggable for instant operation. The supported operating temperature for this non-hardened model is 32 to 185°F. The supported distance is approximately 900' with 62.5/125-micron cabling, and 1800' with 50/125-micron cables. The wavelength is 850nm, the sensitivity is -17dBm, and the optical output power is -19 to -14dBm. Also, as a DDM model, this transceiver supports enhanced Digital Diagnostics Monitoring for getting real-time diagnostic information.

1800' with 50/125-Micron Cables    900' with 62.5/125-Micron Cables    Wavelength: 850nm    Sensitivity: -17dBm

Related Questions and Answers

Q: 1. Is this a rebranded Godox?

A: No, Cactus is a brand of its own.

Q: 2. Hello, I had Eartec HUB7SMXS UltraLITE 7-Person and just lost this hub . Can I buy it and use with old headphones? Thank you.

A: Yes you can should work

Q: 3. When joining two hubs together can the headsets communicate in 4 unit groups still or just one group of 16?

A: When joining two Eartec HUB Mini Duplex Transceiver Base for 1 Plug-In & up to 8 Wireless UltraLITE Headsets (USA) hubs together you can expand your total headset count up to 16 headsets. The Eartec HUB Mini Duplex Transceiver Base for 1 Plug-In & up to 8 Wireless UltraLITE Headsets has 2 channels to communicate on, this hub does not allow for more than 2 groups.

Q: 4. I would like to use the AC / Adapter for the hub. What kind of the Volt output? 5V or 12V?

A: The voltage output of the ac adapter to the Hub mini is 5v, 1 amp.

Q: 5. I have a sony a6000 and a Metz 44 Af-1 flash. Will the Cactus v6 IIs work with the Metz 44AF-1?

A: As long as the Metz 44 AF-1 you have is for Sony Multi-Interface shoe cameras you should be fine.

Q: 6. Can you link a master headset to the hub? I purchased a UL3S kit and want to expand my kit to six wireless headsets. Do I need to purchase three remote headsets or four to accomplish this?

A: No only one. You can run 7 headsets off the single Hub.

Q: 7. Does the hub have any sort of audio out so that I could plug it into a mixer?

A: The Eartec HUB Mini Duplex Transceiver Base for 1 Plug-In & up to 8 Wireless UltraLITE Headsets has a single 3.5mm connection meant for an Eartec headset and may or may not work to output an audio feed to a mixer.

Q: 8. Is this for Sony A Mount or E mount or both?

A: This transceiver works with any Sony A mount DSLR or Sony E mount mirrorless camera with the Multi-Interface Shoe. The top shoe accepts all Sony flashes with the Multi-Interface Shoe as well.

Q: 9. I want connect mg a6300 to a youngnuo 568 flash (for canon) with cactus v6iis . will convert sony p-ttl to canon e-ttl?

A: High-speed sync only now. They have announced a firmware update coming soon for Sigma, Sony and Fujifilm cameras that will the camera's TTL profiles. Then they will release upgrades for Canon, Nikon, Olympus, Panasonic and Pentax one at a time. So your a6300 should be in line for the first upgrade to the Cactus V6ii.

Q: 10. Obviously this will work with Sony. My question is do I need two (2) of these to make the system work? 1 for the camera body (Sony a6300) and one for the flash (Sony F43M)? Also, will I need any additional chords for anything?

A: You need two units - either one can be a transmitter or receiver, as there is a switch on each unit. No extra cords needed if you have the Mi shoe on the flash... I'm using three of these - one on-camera, and two on my flashes.