The space gray Kondor Blue ARRI Rosette to Accessory Mount converts any ARRI rosette to an ARRI mount. It features a captive M6 screw on one end and an 8-pin ARRI rosette mount on the other end, which will line up perfectly with any compatible accessory at the correct orientation. A 4mm Allen key is included.

Standard ARRI Rosette    Captive M6 Mounting Screw    8-Pin ARRI Rosette Mount

Related Questions and Answers

Q: 1. Does this work with Sony A7ii?

A: Yes, the Kondor Blue Base Rig for Sony a7/a1 Series (Raven Black) can mount the Sony a7 II Mirrorless Camera, but with a limitation. The eyelet strap holes on the cage are only compatible with the Sony a7 IV Mirrorless Camera, the Sony a1 Mirrorless Camera, the Sony a7R IVA Mirrorless Camera, and the Sony a7S III Mirrorless Camera.

Q: 2. Thanks for the answer, I made a mistake in my question, I would like to know if the platform is compatible with ManfrottoMVH500?

A: Yes, the Manfrotto MVH500 head will also accept Manfrotto 501 type plates, and as such, the Kondor Blue 501/Arca-Type Pivot Camera Plate for Ronin Gimbals (Space Gray), would work with a MVH500 head.

Q: 3. Can this power the Canon R5c with the Kondor DTAP regulator to USBC? I see this on has 12v-14v, in the images and would it matter which one the regulator is using?

A: Yes, the Kondor Blue Male D-Tap to 4-Port Female D-Tap Splitter Hub will power the Canon EOS R5C. It will not provide power without a respective battery with a D-TAP port. The camera will not be able to shoot 8K60p without proper USB-C PD power.

Q: 4. If I already have this, BH #KOKBSONYA7R , What will I need to get to this "Base Rig"? I'd like to get this set up with a V-mount. Thanks!

A: You would need the base plate: KOBP501FBM; a set of 15mm rods: AXR15A12; and a v-mount plate adapter that can be mounted on 15mm rods - here is one example: INPD1085.

Q: 5. is this compatible with the original 2012 Blackmagic Pocket Cinema Camera?

A: Yes, the Kondor Blue Cage Top Handle with Start/Stop Camera Control for Select Cameras (Black) can mount above the Blackmagic Design Pocket Cinema Camera with an appropriate NATO rail adapter and provide start/stop triggering for the camera.

Q: 6. How do we attach 19mm studio rods? Is there another accessory for that?

A: You would need a third party accessory to attach 19mm studio rods.

Q: 7. Does this work with the Metabones PL to L Mount adapter on the Kondor Blue Cage for Panasonic S1H with no issues?

A: The Kondor Blue Universal Lens Mount Support for Speed Boosters & Adapters (Space Gray) can be used for this camera however, you may have to use a combination of shims.

Q: 8. I would like to put this splitter into a 15mm rod of my camera rig, what could be a piece of rig component for doing that?

A: The Wooden Camera Universal 15mm Rod Clamp (1/4"-20), BH #WOA00131, could be mounted to the Kondor Blue Male D-Tap to 4-Port Female D-Tap Splitter Hub with Voltmeter (16") and mounted on a 15mm rod.

Q: 9. Is the plate that attaches the camera to the cage compatible with Manfrotto 501 style video heads? Can a second 501 style plate be attached below the base that holds the 15mm rods?

A: The plate that attaches to the camera is 501 compatible. the connection at the bottom is an arri dovetail. what most people do is mount a dovetail plate on top of their tripod because the arri dovetail is much easier to get larger camera systems on/off a tripod. however if you prefer to use the 501 plate instead you can mount the dovetail plate to the bottom of this cage and then attach a 501 plate beneath the dovetail. Here is an example of a dovetail that you can use: Kondor Blue 12" ARRI Lightweight Dovetail Plate B&H # KOARRIDP MFR # KB-ARRI-DP

Q: 10. Does the REC work for the Blackmagic 6k Pro?

A: To use the Kondor Blue Talon XL Top Handle with Trigger REC for Select Cameras with the Blackmagic Design 6k Pro, you can use as a handle but not to trigger the camera.