Generate crystal-clear clock-synced delay for looping, echoes, sound-on-sound, Karplus Strong synthesis, and more with the 4ms Looping Delay DIY Kit, a do-it-yourself Eurorack compatible clock-based delay module designed for creative synthesis.

Not a tape or analog emulation, but a modern digital delay, the Looping Delay combines features of delay, looping, and sample-tight synchronization for powerful and dynamic sound capture and modification. Based on the Dual Looping Delay, the Looping Delay offers the same high-quality sound in a smaller, single-channel format. The Looping Delay Kit includes all the components needed to complete the module as well as a black panel.

Full DIY Kit    Beginner Level Build    Delay, Looping, Echo, Sound-on-Sound    Synchronized Loop or Echo Time    87 sec Delay/Loop Mono (43 sec Stereo)    48 kHz, 24-Bit Sampling Rate    Low Noise and Low Jitter    Tap-Tempo Button and Clock Ping Set Beat    CV for Time, Feedback, Delay Feed, Mix    Includes All Kit Components

• Includes all the parts necessary to build a full-featured Looping Delay module
• Beginner-level kit: Soldering proficiency required
• Tools needed (not included):
  • Soldering iron, solder
  • Flush snips
  • Needle-nose pliers (for removing a component if you make a mistake)
  • 5/16" and 3/8" socket driver (optional: pliers will work too if you're careful)
  • Multimeter (for reading resistor values if you don't know the resistor color-code chart)

• Stereo or mono mode (Return/Send becomes right channel In/Out in stereo mode)
• 87 seconds maximum delay/loop time in mono, or 43 seconds in stereo.
• 48 kHz / 24-bit sampling rate, loop recorded at 16-bit
• Extremely quiet, low noise, low jitter design
• Delay and loop time is syncable to a clock, or a division or multiplication of a clock
• Infinite Hold mode for looping and windowing
• Reverse feature for toggling direction of playback
• Feedback ranges from 0 to 110%
• 1V/octave tracking for Resonant Delays (Karplus-Strong)
• Wet/Dry mix output
• CV and trigger inputs for all features

• Time switches change range of Time knob from 1/8th notes up to 32 bars
• Digital feedback, up to 110%
• Delay Feed control, independent of dry/wet signal mix
• Infinite Hold mode disables recording and plays a loop
• Start and End points of loop can be modified in real-time for scrubbing or windowing
• Reverse mode plays memory contents backwards
• Resonant Delays (ala Karplus-Strong)
• Delay time can be as short as 650uS
• Time CV jack can respond at 1V/octave in Unquantized Time Mode
• Trigger inputs for toggling Infinite Hold and Reverse
• Send and Return for feedback with external modules
• Send and Return function as right channel In and Out in stereo mode
• CV jacks to control Time, Feedback, Delay Feed (record level), and Mix
• Various algorithms can be selected for interfacing with jittery external clocks (External Clock De-Jitter)
• Quantized Change Mode quantizes toggling of Infinite Hold and Reverse

• 16 HP Eurorack format module
• Maximum Depth: 1.1" (28mm)
• Includes power ribbon cable with 16-pin Eurorack power headers
• Power consumption: +12V: 125mA, -12V: 45mA

Related Questions and Answers

Q: 1. How bright (in nits) is the minimum brightness setting?

A: HP only specifies the monitors brightness at its maximum, which is 400 cd/m2. The reason being is that when the brightness is set the lowest setting, "the image can appear as blurred, indistinct, or too dark," as noted HP's manual for the monitor.

Q: 2. Is the RGB per key?

A: Yes, the HP OMEN 16-b1020nr's keyboard RGB backlights are individually customizable.

Q: 3. Is shipping from the Aluminyze photo service location an additional cost?

A: For US and Canadian customers, there is free shipping from Aluminyze.

Q: 4. Will i encounter compatibility issues if i use this laptop in France ? Knowing that France uses a voltage of 230 volts with 50Hz

A: The HP 16.1" OMEN 16-b1020nr Gaming Laptop BH #HE641K5UA comes with a 100-240V power supply so you would be able to use it anywhere in the world with the proper adapter. You could use something like the Watson 3-Prong USA to 2-Prong Europe Power Adapter Plug BH #WATAGUSAE.

Q: 5. How do you connect this to the app on wifi? I don't see any sort "pairing" or wifi indicators on the body of the camera. And without wifi it can't be turned onto the motion detection setting which kind of stinks. Any tips or tricks would be greatly appreciated.

A: The KJB Security Products DIY 1080p Wi-Fi Pinhole Hidden Camera BH #KJDIY120 requires downloading the Kalay App for iOS & Android.

Q: 6. Does the keyboard come with arabic/English?

A: No, the HP 16.1" OMEN 16-b1020nr Gaming Laptop BH #HE641K5UA comes with a North American QWERTY keyboard.

Q: 7. Presumably this kit works with the 2019 21.5' iMac right?

A: At this time the manufacturer states this would work with the 2012-2017 21.5" iMac models

Q: 8. Can I plug in another M.2 2280 NVMe PCIe SSD?

A: The HP 16.1" OMEN 16-b1020nr Gaming Laptop has one in use M.2 slot.

Q: 9. Does this print instantly like on the spot a few seconds after shooting a picture ?

A: Its not an instant camera. After shooting you will need to develop the film

Q: 10. How is the Z2 workstation mounted to the back of this monitor? Do you have photos?

A: thanks, but the description of the monitor in General Features leads one to conclude that this can be done with no additional parts. General Features Declutter your desk and connect a series of displays by daisy chaining with a single DisplayPort cable. Connect to a workstation, desktop, and additional displays. Mount your HP Z2 Mini or HP Desktop Mini directly to the monitor for a clean workspace. Even if just a third of a pixel fails or is stuck in one position, HP will replace the entire display. Easily attach the Z Display Conferencing Speaker Bar for stereo quality audio and dual microphones. The assurance of HP's limited three-year standard warranty.