Generate crystal-clear clock-synced delay for looping, echoes, sound on sound, Karplus-Strong synthesis, and more with the white 4ms Dual Looping Delay, a Eurorack-compatible clock-based delay module designed for creative synthesis.

By default, a looping delay records and plays continuously, though recording can be suspended at any time with Infinite Repeat. Sustain of delays and loops is mainly accomplished with regeneration, allowing an organic, evolving approach to sound creation as new material replaces old, more or less gradually. The 4ms Dual Looping Delay also provides advanced clock input and output facilities that allow for locking delayed and looped material with sequencers and rhythmic devices. The module ships with a ribbon power cable and mounting screws.

Delay, Looping, Echo, Sound on Sound    Synchronized Loop or Echo Time    Up to 3 Minutes Delay/Loop Time (16-Bit)    48 kHz Sampling Rate, 16- and 24-Bit    Normaled I/O for Mono, Stereo, Dual Mode    Tap Tempo Button and Clock Ping Set Beat    CV for Time, Feedback, Delay Feed, Mix    Send and Return + Loop Clock Out    Reverse and Infinite Hold    Includes Power Cable + Mounting Screws

• Ping Lock for each channel
• Quantized Inf/Rev/Time Change Mode
• 24-bit audio (selectable with a jumper)
• Reverse and Inf Hold can be toggled with gates or triggers
• Delay Feed knob can be selected to be audio or linear taper
• Runaway DC at high feedback settings (e.g. resonant delays) is eliminated
• Auto-Muting now has a 1 ms attack and decay
• Cross-fade Time (CFT) for splices is now variable (set in System Mode from 0 to 500 ms)
• Selection of External Clock De-jittering algorithms to allow the DLD to sync with many types of external clocks
• Exiting Infinite Hold plays through, without restarting loop

• Two independent delay/loop channels, synchronized to a common time base
• Almost 3 minutes delay/loop time per channel (2:54) in default storage mode (16-bit)
• 48 kHz / 16-bit sampling rate, option available for 24-bit storage
• Extremely quiet, low noise and low jitter design
• Normaled connections of input and output for flexible use in mono, stereo, or dual mode
• Tap tempo button and clock Ping input set the basis for one beat
• Delay/loop time set as a number of musical beats (or fractions of beats) using the Time knob, switch, and CV jack
• Sample-accurate clock output for perfect synchronization
• Loop clock outputs for each channel
• Time switches change range of Time knob from 1/8th notes up to 32 bars
• Digital feedback, up to 110%
• Delay Level control, independent of dry/wet signal mix
• Infinite Hold mode disables recording input and fixes regeneration at exactly 100%
• Reverse mode plays memory contents backwards
• With an infinite loop locked, knobs or CV can window around memory, by shifting the loop
• Triggered toggle inputs for Infinite Hold and Reverse
• Send and Return on each channel for feedback with external modules
• CV jacks to control Time, Level, and Feedback

• 20 HP Eurorack format module
• Maximum depth: 0.98" (25mm)
• Includes power ribbon cable with 16-pin Eurorack power headers
• Power consumption: +12V: 188mA, -12V: 48mA

Related Questions and Answers

Q: 1. Can the CX350 use this to stream, or does it only stream through the ethernet connection?

A: Yes, the CX350 has an ethernet port that can be used for a wired connection. Or you could use this for a Wireless connection for streaming.

Q: 2. hello so with this device I can stream straight out the camera via wireless?

A: That will depend on the camera and if it has that capability when used with this adapter.

Q: 3. Is it possible to use these in a mulicamera setup in the same room?

A: Panasonic lists this device as working on several frequencies. However, the scenario you are asking about has not been reported. See here for more information. http://bit.ly/2tNXAvW

Q: 4. How many times can one download the software as users replace their notepads or other devices? Is the software transferable to other devices?

A: The Panasonic camera control apps are free and can be downloaded as many times as the user needs

Q: 5. Is it the same as Tilta Power Supply Module for Ring Grip? Can those be exchanged / used for both dual grip and ring grip?

A: The Tilta Power Supply Module for Dual-Handle Power Supply Bracket is different from the Tilta Power Supply Module for Ring Grip. There are different connections on the back of these brackets but should be interchangeable.

Q: 6. Will this support Miracast on Panasonic projectors?

A: No, the Panasonic AJ-WM50P Wireless System is designed to plug into Panasonic cameras to allow wireless metadata input/display and proxy playback on iPads, iPhones, and PCs.

Q: 7. Does this come with a half height / low profile BRACKET? The card looks like it's low profile, but the bracket doesn't!

A: Yes, the HP Dual TBT4 PCIe x4 Low-Profile Card's bracket is a low profile bracket.

Q: 8. Are you able to pull files from the camera to the laptop and edit live while the camera is being used to shoot? Asking for the Ux90

A: This will not be able to work. You will need to do them separately.

Q: 9. Panasonic Wireless module should work with ux180 also? Any experience?

A: This isnt a wireless video monitor and never intended to be. Not sure about the UX180 question, but I felt the need to clarify another users note.

Q: 10. Does this work with AMD X670 AM5 Motherboards?

A: Yes, you can use the HP Dual TBT4 PCIe x4 Low-Profile Card to bring Thunderbolt 4 connectivity to an AMD X670 motherboard.