4Ms Looping Delay Eurorack Module 16 Hp

4ms Looping Delay Eurorack Module 16 Hp

Product Code: eq136459
Availability: In Stock

$825.00 $1,196.25

Qty

9 reviews Write a review

Description
Reviews (9)

Generate crystal-clear clock-synced delay for looping, echoes, sound on sound, Karplus-Strong synthesis, and more with the 4ms Looping Delay, a Eurorack-compatible clock-based delay module designed for creative synthesis.

Not a tape or analog emulation, but a modern digital delay, the Looping Delay combines features of delay, looping, and sample-tight synchronization, for powerful and dynamic sound capture and modification. Based on the Dual Looping Delay, the Looping Delay offers the same high-quality sound.

Delay, Looping, Echo, Sound on Sound Synchronized Loop or Echo Time 87 sec Delay/Loop Mono (43 sec Stereo) 24-Bit, 48 kHz Sampling Rate Low Noise and Low Jitter Tap Tempo Button and Clock Ping Set Beat CV for Time, Feedback, Delay Feed, Mix Send and Return + Loop Clock Out Reverse and Infinite Hold Includes Power Cable + Mounting Screws

Key Specs
Sound Generation	Analog
Maximum Polyphony	Not Specified by Manufacturer
Audio I/O	2x 1/8" / 3.5 mm TS Unbalanced Mono Instrument Input 2x 1/8" / 3.5 mm TS Unbalanced Mono Instrument Output
MIDI I/O	No
CV/Gate I/O	9x 1/8" / 3.5 mm TS CV/Trigger Input 2x 1/8" / 3.5 mm TS CV/Trigger Output
Patch Points	No
Eurorack Current Consumption	125 mA on +12 V Rail 45 mA on -12 V Rail
Horizontal Pitch	16 HP
General
Item Type	Eurorack Module
Sound Generation	Analog
Keyboard	No
Expression Controls	No
Number of Pads	No
Display	No
Sounds
Maximum Polyphony	Not Specified by Manufacturer
Built-In Effects	1x Delay: Delay, Delay Sync, Digital Delay (Looping)
Built-In Speaker	No
Synthesis
Oscillators	No
Mixer	No
Amplifiers	No
Envelopes	No
Filters	No
LFOs	No
Sequencing & Recording
Sequencer	No
Arpeggiator	No
Connectivity
Audio I/O	2x 1/8" / 3.5 mm TS Unbalanced Mono Instrument Input 2x 1/8" / 3.5 mm TS Unbalanced Mono Instrument Output
Pedal Support	No
MIDI I/O	No
CV/Gate I/O	9x 1/8" / 3.5 mm TS CV/Trigger Input 2x 1/8" / 3.5 mm TS CV/Trigger Output
Control Voltage Level	VCA CV In: 0 to +5 V EG CV Out: -10.1 to +10.2 V Trigger : +1.2 V
Patch Points	No
Sync I/O	1x 1/8" / 3.5 mm TS Clock Input 2x 1/8" / 3.5 mm TS Clock Output
Network I/O	No
USB I/O	No
Media/Memory Card Slot	No
Audio Performance
Maximum Input Level	+20 V p-p
Maximum Output Level	10 V p-p
Included Software	No
Mobile App Compatible	No
Power
Power Requirements	Eurorack Power
Eurorack Current Consumption	125 mA on +12 V Rail 45 mA on -12 V Rail
Physical
Color	Black
Horizontal Pitch	16 HP
Included Accessories	No

Stereo or mono mode (Return/Send becomes right channel In/Out in stereo mode)
87 seconds maximum delay/loop time in mono, or 43 seconds in stereo.
48 kHz / 24-bit sampling rate, loop recorded at 16-bit (24-bit optional)
Extremely quiet, low-noise, low-jitter design
Delay and loop time is syncable to a clock or a division or multiplication of a clock
Infinite Hold mode for looping and windowing
Reverse feature for toggling direction of playback
Feedback ranges from 0 to 110%
1V/octave tracking for Resonant Delays (Karplus-Strong)
Wet/Dry mix output, as well as dedicated Send/Return for feedback loop
CV and trigger inputs for all features

Time switches change range of Time knob from 1/8th notes up to 32 bars
Digital feedback, up to 110%
Delay Feed control, independent of dry/wet signal mix
Infinite Hold mode disables recording and plays a loop
Start and End points of loop can be modified in real time for scrubbing or windowing
Reverse mode plays memory contents backwards
Resonant Delays (ala Karplus-Strong)
Delay time can be as short as 650 microseconds
Time CV jack can respond at 1V/octave in Unquantized Time Mode
Trigger inputs for toggling Infinite Hold and Reverse
Send and Return for feedback with external modules
Send and Return function as right channel In and Out in stereo mode
CV jacks to control Time, Feedback, Delay Feed (record level), and Mix
Various algorithms can be selected interfacing with jittery external clocks (External Clock De-jitter)
Quantized Change Mode quantizes toggling of Infinite Hold and Reverse

16 HP Eurorack format module
Maximum depth: 1.1" (28mm)
Includes power ribbon cable with 16-pin Eurorack power headers
Power consumption: +12V: 125mA, -12V: 45mA

Related Questions and Answers

Q: 1. Is it possible to mount this via 1/4-20" instead of the cold shoe?

A: Yes, beneath the cold shoe of the edelkrone Power Module (V-Mount) reveals a 1/4"-20 receiving point.

Q: 2. is it compatible with V5 long ?

A: The edelkrone Slide Module v2 is compatible with the edelkrone SliderPlus V5.

Q: 3. hi, I would have, politely two pieces of information, the first if I can use Remote Control and Flash Trigger of cactus or yongnuo instead Hahnel Captur Remote Control and Flash Trigger ?The second piece of information is whether the cable, Impact Shutter Release Cable for Nikon Cameras with 10-Pin Connector, is suitable for nikon d810 ?thank youAntonio

A: Question 1. Not sure what you are asking but you can use the Hahnel to trigger either your flash or your shutter. I use pocket wizards with it to remotely trigger my shutter.

Q: 4. Which MiniPC mount is compatible with this monitor ?. Or is the HP B550 16U00AA mount compatible with the HP 27 "Z27k G3 1B9T0AA # ABB monitor? well thank you Best Regards Milan S.

A: This mount will allow you to mount a HP Mini Workstation to the back of the monitor. https://bhpho.to/3ntVa0h

Q: 5. Will this display 23.98 progressive video signals from a vide camera like Canon C300 mkIII?

A: Yes, the HP Z27k G3 27" 4K 16:9 IPS Monitor can display a 23.98p signal from a Canon C300 MkIII via HDMI.

Q: 6. Will this work with A Fujifilm x100T?

A: You would need to purchase the Impact Shutter Release Cable for Canon Cameras with Sub-Mini Connector, B&H # IMC2.5CANSM, to connect the hahnel Captur Pro Module to the Fujifilm X100T Digital Camera. With the above cable, yes, it would be compatible for your usage needs.

Q: 7. Can this monitor connect with a MacBook air?

A: Yes, this HP E24mv 24" 16:9 Conferencing IPS Monitor will connect with a MacBook air. Depending the the model, you will need an adapter.

Q: 8. What is the TDP of the NVIDIA GeForce RTX 3070 on this laptop?

A: HP has not provided a spec on the TDB of the OMEN 16-b1020nr Gaming Laptop's GPU, but the average benchmark TDP of the NVIDIA GeForce RTX 3070 (Mobile) is 125w.

Q: 9. is the RAM upgradeable?

A: The HP 16.1" OMEN 16-ae0267nr Gaming Notebook (B&H # HE9R0R1UA) can be upgraded to up to 32GB of RAM.

Q: 10. Does the keyboard come with arabic/English?

A: No, the HP 16.1" OMEN 16-b1020nr Gaming Laptop BH #HE641K5UA comes with a North American QWERTY keyboard.

Milos	18/08/2024
[Black] Great keyboard, works as intended - and a good amount of options under the hood. Will your keyboard be a bit messier looking? Sure..but a really cool way to customize exactly what you want your perfect 4-voice poly/paraphonic instrument to do. And yes you can go beyond 4 voices using its midi outputs. All in all a pretty cool way to incorporate a case and keyboard in one. 5

Bob Lavigne	19/07/2024
[Eurorack Module] The sound is very clear. No coloring. This is by far the best delay I've had and the others I've owned don't macth on any point... (Ibanez AD-9, Boss DD-7) It's a bit expensive but worth it. It's simple to use, very nice and offers a lot for the money. The sound is absolutely incredible. The USB port offers the capability of upgrading the presets and firmware. This pedal evolves so it doesn't get outdated. Eventide have a nive web support and pdf files and programs. You can organize the presets with a free application on their site. So many features - impossible to list. 5

Monty	23/06/2024
[16 HP] Timeless 3 has replaced my sound toys echo boy after so many years! Timeless 3 is very easy to use and sounds great! I was on the fence for a while as Echoboy is a very tough contender but it just doesnt have the features of this todays sound! give it a try ! 5

Black Flatbush	14/06/2024
[+20 V p-p ] Sound wave surfer devise. I would recommend it as first synthesizer or a meditation tool. Love that it works on batteries lots of fun anywhere. You can take it outside, to your job, school or a park. Great gadget! 5

Derrick	23/05/2024
[Eurorack Power] exactly what I need. 5

Pierr	17/05/2024
[10 V p-p ] remember to split your eurorack modules even on the buss power, you have second row and you can put your power hungry modules in that row, also you get about 70mm depth on the bottom row as there is no obstruction from the bus board, use modular grid to sort out the arrangement, I got this in 2 days from B&H, incredible timing. Thank You Guys !! 5

Staxman	03/05/2024
[10 V p-p ] After searching for weeks for the right delay I finally settled on the timefactor and could not be happier. I use it 2 ways, as the last effect on my pedalboard with stereo INS and stereo outs feeding two amps and from the send to the return of each of two amps. The timefactor works great in both uses. The ability to choose the mix of both dry and delay is great. The ability to use two seperate delay lines is like having two delay lines in one. I also like the three options for bypass type allowing you to use the peal as a buffer in your chain or going full true bypass. For the money this is one of the most versatile units available, and with the quality of eventide behind it, you cannot go wrong. 5

Austin	16/04/2024
[10 V p-p ] I have been using this as a source for automated modulations and a sweeping sweet-spot finder in my patches, overall it frees up some sends for me and I find cool sounds faster 5