4Ms Multi Power Cable 16-Pin

4ms Multi Power Cable 16-pin

Product Code: eq136462
Availability: In Stock

$18.00 $24.12

Qty

10 reviews Write a review

Description
Reviews (10)

Power up to three modules with the 4ms Multi Power Cable, a 16-conductor ribbon cable with three 16-pin connectors and a 16-pin end connector. The 20" cable is great for powering modules in any sized 4ms Pods.

For 4ms Power Pods Passive Power Distribution Cable 20" Long Cable 3 x 16-Pin Connectors 1 x 16-Pin End Connector

Packaging Info
Package Weight	0.015 lb
Box Dimensions (LxWxH)	5.05 x 2.2 x 1.55"

Related Questions and Answers

Q: 1. Does this work with the Panasonic CX350? Specifically can you control focus, zoom, and iris on the cx350?

A: There is no rosette on the Panasonic CX350 for you to interface the CAMEOGEAR CameoGrip Retro Handgrip with 20" LANC Cable. However, you could attach this handle to a baseplate that has a rosette on it. The baseplate would attach to the bottom of the camera. The camcorder supports LANC control. Therefore, if you get it rigged to the camera, you will be able to use the LANC control.

Q: 2. Can this power a SDI to hdmi micro converter?im sure it can, I just want to ask the experts and be sure.

A: Yes, the Kondor Blue D-Tap to USB-C Power Delivery Cable for Mirrorless Cameras can be used as the surrogate cable to provide power to a Blackmagic Design SDI to HDMI Micro Converter 3G/12G.

Q: 3. Can this work with the Canon R7 or R5?

A: No, the CAMEOGEAR CameoGrip Retro Handgrip with 20" LANC Cable is incompatible with the Canon EOS R7 Mirrorless Camera and the Canon EOS R5 Mirrorless Camera.

Q: 4. Will it power the Nikon z9?

A: Yes, the Nikon Z9 supports USB-C power delivery and Nikon Z9 would also be supported when using the Kondor Blue D-Tap to USB-C Power Delivery Cable for Mirrorless Cameras.

Q: 5. Will it work on a Z CAM?

A: CAMEOGEAR CameoGrip Retro Handgrip with 20" LANC Cable (B&H# CACAMGRIPL) is designed to function with certain Canon cinema cameras and Sony mirrorless and cinema cameras (see the Camera Compatibility section below). Unfortunately, because the protocols used for control with those are different from the ones for Z CAM products it will not work for Z CAM cameras that are currently available. We recommend the RVLVR Right-Side Remote Clutch Handle with LANC Camera Control (Black Walnut) (B&H# RVLCLUTCH1) for the Z CAM E2, E2-S6, E2-F6, E2-G, E2-C, and E2-F8: https://bhpho.to/37gTrW4

Q: 6. Can I use this to power the Tilta Nano ii focus motor?

A: You can use the Kondor Blue D-Tap to USB-C Power Delivery Cable for Mirrorless Cameras (16", Blue) to power the TILTA NANO II motor.

Q: 7. Can i charge IDX imicro series v mount battery using usb-c?

A: The Kondor Blue D-Tap to USB-C Power Delivery Cable for Mirrorless Cameras should work. However, a better choice is listed below. The Kondor BH #KOKFUSBCPDDT will be a much faster charging solution. Kondor Blue D-Tap to Female USB-C PD 2-Way Battery Charging Power Cable (Kondor Blue, 6") BH #KOKFUSBCPDDT

Q: 8. The Sony FX3 works best at 7.4 to 9V. But it will also function at 5V. How do I know this will deliver the 9V?

A: Because the Kondor adapter supports USB-C PD power it will negotiate with and deliver the correct power to the camera. We recommend using dummy battery solutions over USB-C because there is still a power drain. Keeping a battery in camera is the solution around this, however the battery will slowly drain when powering via USB-C

Q: 9. Will this work with the Panasonic S1H?

A: Yes, the Kondor Blue D-Tap to USB-C Power Delivery Cable for Mirrorless Cameras (16", Blue) would be compatible with the Panasonic Lumix S1H Mirrorless Camera.

Q: 10. Is this the cable that comes standard with the D2?

A: Yes, the Profoto Power Cable for D2 (16', US / No. America) is the original power cable designed for use with both the Profoto D2 500Ws AirTTL Monolight or the Profoto D2 1000Ws AirTTL Monolight.

Eric	27/08/2024
[0.015 lb] After testing several different cables, I found this cable - the Tentacle Sync Tentacle to 5-Pin LEMO Cable- is the correct cable to send timecode to the ARRI Alexa 35. 5

Dustin	23/08/2024
[0.015 lb] I can't believe I waited this long to pick up this cable. The P60X and C are undoubtedly the dark horse fixtures in my kit due to their flexibility and portability. Power has always been the drawback. NP-F battery life is disappointing and the included power supply takes up so much space in my carry-on case. Now I can run run the fixture for over 2 hours on a 98wh v-mount and have freed up so much space in my kit by removing the power supply. Definitely worth it. 5

Bob	03/07/2024
[0.015 lb] If you need a cable for a Red camera this is the one. There are different Red camera's so make sure you know what pin configuration you need 5

Kong	02/07/2024
[0.015 lb] Tentacle Sync cables are always great and as the headline says, this is the cable for use with the RED Mysterium X camera. If that's the camera you're dealing with, don't use the cable that says it's for RED, that connector looks the same but is smaller. I'm sure it's for the newer RED camera systems. 5

Noah	01/07/2024
[0.015 lb] I'm using this cable to power my P60C by a v-mount battery. It feels good quality and is just the right length for my setup. 5

Jeffrey	15/06/2024
[0.015 lb] This is a rare, and difficult thing to find ... but of course B&H has it!, and it arrived in 2 days ... 5

JESSE	08/06/2024
[0.015 lb] I am used to V-Mounts with my old LED's and found the NPF's just didn't compare when it came to long lasting power. This is a must have if you already own V-Mounts. Don't forget the V-Mount Clamp. 5

Marshall	04/06/2024
[0.015 lb] Have a few of these and use them with my Aputure P60c LED lights - work great. A standard 95WH V-mount can power these lights for over 2+ hours. Longer if you're not using the lights at full power. 5

Shawn	30/11/-0001
[0.015 lb] I've been waiting for this one for quite some time, and it works well. I am using it with my Amaran LED panel and a fairly generic V-mount battery and it works perfectly. 5