Matica Mc-L2 Lamination Module For Mc310 Id Card Printer

Matica Mc-l2 Lamination Module For Mc310 Id Card Printer

Product Code: eq136533
Availability: In Stock

$5,257.50 $7,465.65

Qty

9 reviews Write a review

Description
Reviews (9)

Add durability and security to ID cards made using the Matica MC-L2 Lamination Module for MC310 ID Card PrinterMC310 ID card printer with this MC-L2 Lamination Module. Along with preventing tampering, lamination can extend a printed card's life to as long as 10 years. The MC-L2 laminator is simple to operate and can laminate a card in under 20 seconds. Its upper-position cassette facilitates laminating cards printed on a single side. The laminator attaches to the printer by means of a connecting plinth, which also provides storage room for blank cards, laminating supplies, or cleaning kits. A four-line LCD display shows the control menu, error messages and warnings.

For More Durable & Secure Cards Laminates Card in 19 Seconds Connects Easily to Printer Store Cards in Connecting Plinth 4-Line LCD Display

General
Compatibility	Matica MC-L2 Lamination Module
Power
Power Source	AC Adapter with Power Brick
AC Input Power	90 to 270 VAC, 50 / 60 Hz
Environmental
Certifications	FCC, CE, cUL, Kcc
Operating Temperature	59 to 86°F / 15 to 30°C
Operating Humidity	20 to 60%
Storage Temperature	23 to 158°F / -5 to 70°C
Storage Humidity	20 to 70%
Physical
Color	Black
Dimensions	12.6 x 12.6 x 8.4" / 32 x 32 x 21.4 cm
Weight	22 lb / 10 kg

Upper cassette for laminating single-sided cards
For PVC or composite CR-80 cards
Thin film overlay, clear or holographic: 1000 prints/roll
Patch, clear or holographic: 500 prints/roll
Patch thickness: 0.5 mil, 0.6 mil, 1.0 mil
150-card stacker
Kensington lock slot

Related Questions and Answers

Q: 1. Will this case hold the Nikon 180-600mm lens?

A: Yes, the Nikon CL-L2 Soft Case for 400mm, 500mm and 600mm will fit the Nikon 180-600mm lens. It is a few inches wider than the lens though.

Q: 2. Can language be configured for this item or does it only come with English keys?

A: We only sell this with English keys.

Q: 3. What is the minimum sustained write speed?

A: At this time, Nikon has not published a minimum sustained write speed for the MC-CF660G CFexpress Type B Card.

Q: 4. Will this case accommodate Nikon 400mm FL version with the hood attached in reverse (without removing any padding inside the bag)?

A: Yes, it will fit nicely, you may have to remove 1 section of padding.

Q: 5. Can you use pair this, and use the Touch ID with more than one Mac? I'd like to use it with both my work and my personal MacBooks

A: You can pair the Apple Magic Keyboard with Touch ID to multiple Macs. However, the Touch ID will only work with M1 Macs.

Q: 6. Is this paper matte finish and without watermark on the back side?

A: The HiTi P-60 Print Kit for P310W ID Photo Printer, B&H # HIMP3103202, is glossy and does not have a watermark.

Q: 7. can these be used plugged in to power for a longer run time?

A: Yes, the Ulanzi L2 COB RGB LED Magnetic Light Cube can be powered while charging and can run up to 60 hours.

Q: 8. Looking for a case smaller than the CL-L3. Will the Nikon Z 800mm 6.3 fit in the CL-L2 with hood reversed, no camera ?

A: The Nikon NIKKOR Z 800mm f/6.3 VR S Lens fits in the Nikon CL-L2 Soft Case for 400mm, 500mm, and 600mm.

Q: 9. Will this case hold the Nikon 200-500? Is it the best one for the purpose?

A: Yes it will hold your 200-500 with a camera body attached. I ordered it for my D3s and the Nikon 600 lens. I holds them and I use this case all the time.

Q: 10. Is this the same ring for the gfx 50r?

A: Yes, the FUJIFILM Belt Ring L2 for GFX 100S is the same D-ring available with the Fujifilm GFX 50R Medium Format Mirrorless Camera.

Jason	18/09/2024
[20 to 70%] Bought this printer for the fire department so we could print department IDs for our members. The setup was easy and after a few test prints, we were ready for prime time. 5

Ron	06/09/2024
[Black] We are a non-profit and needed a reasonably priced id card printer and this one is working great. We use AlphaCard card system. This is printer is basically plug-n-play. Make sire you install the drivers. The native Windows drivers do not play well AlphaCard card system. 5

Ross	27/08/2024
[20 to 70%] This printer was easy to set up and the quality of the prints are excellent - better than my expectations. I have not used the included software, I am exclusively printing predesigned cards from PDF files, but I've been fully satisfied. I'm printing relatively low volumes, so the fact that each card has to be individually fed into the unit isn't an issue and I appreciate the printer's compact size. If you're looking to print higher volumes of cards I might recommend a larger model with a feeder. I've also used this printer with the mono black ribbon and it works great as well. 5

Matt	17/08/2024
[20 to 70%] This was a very easy setup and very easy to figure out and use. We are making ID cards for our fire department and it does way more than we need. Definitely would recommend it to anyone. 5

Ross	14/07/2024
[20 to 70%] I've been using this with my SMART-21 and it works great when only black text is needed. I use this primarily to print the backs of cards and then I use the full color ribbon to do the fronts. 5

A1	04/05/2024
[20 to 60%] Good Print 5

Dana	18/04/2024
[20 to 60%] This ribbon and plastic card kit is made to work with our SMART-21 ID card printing machine and works well! The shipping was swift and we received our orders of this kit very quickly. 5