This 90W 4ms Power Brick 90W Compact Power Supplyfrom 4ms Power Brick 90W Compact Power Supplyis made for powering 4ms Pods and Row Power modules. The power brick supports worldwide power from 100 to 240 VAC at 50/60 Hz delivering between 15 and 20 VDC output at 90W. The DC output features a 5.5mm center positive barrel connector with a 2.1mm inner diameter.

15 to 20 VDC Output    100 to 240 VAC Input    5.5mm Outer Diameter Barrel Plug    2.1mm Inner Diameter Barrel Plug

15 to 20 VDC Positive center 2.1mm barrel plug Minimum 30W output power Low-noise output

Related Questions and Answers

Q: 1. Will this power the Blackmagic Ursa Mini?

A: yes this 4pim XLR power supply will power the Black magic Ursa line of cameras

Q: 2. Will this work for a Hollyland T1000 Base Station?

A: The Core SWX SPU-4 Compact Power Supply is not the correct voltage for the Hollyland MARS T1000 Base Station.

Q: 3. Is this the correct power supply for the BlackMagic Cinema Camera 2.5k?

A: No. The correct power supply part number for the Cinema Camera 2.5K is PSUPPLY-12V30W.

Q: 4. It works with blackmagic studio camera???

A: Yes, there is a 4-Pin XLR port that takes 12 to 15V.

Q: 5. Would this power supply fit the original Blackmagic Design Pocket Cinema Camera? BH #BLPKCINECAM

A: No, that won't fit. You need power supply PSUPPLY-12V10W.

Q: 6. Can you mount two of these to the Advanced Ring Grip for RS2?

A: Yes, in terms of available space, you can certainly mount two of these to the Advanced Ring Grip.

Q: 7. Does this work with the Blackmagic Studio 4k camera?

A: Yes. The unit will provide the power needed for the blackmagic studio 4k camera.

Q: 8. Would this work with a sony PMW F3?

A: Yes, the Core SWX SPU-4 Compact Power Supply would work with the Sony PMW-F3L.

Q: 9. does it work with the Asus VivoBook S15 S510UA-DS51 Notebook?

A: The universal power adapter is made to work with most notebooks and should be compatible with your ASUS.

Q: 10. Does the D tap output also ACCEPT power via d-tap, thereby powering the ring? I ask because the gold mount plate doesn't work for many people, it's poorly designed to foul the gimbal or top handle when a 'normal' gold mount battery is attached. So I would like to know if i can attach a gold mount to the ring via a basic clamp mount (so not feeding power through pins, just a bog standard clamp), then make a male- male D-tap cable and plug INTO the power supply module's output from the battery's dtap output. IF that would work, it would make any other power supply modules on the ring 'hot' for accessories. Sorry for such a long question but i wanted to give the reason for it so you understand the dilemma. Please let me know? I have like 24 Gold mount batteries so i'm not excited to switch to Vlock system just for this bladdy gimbal

A: The Dtap connector on the Tilta Power Supply Module for Ring Grip will only output power.