4Ms Quad Clock Distributor Eurorack Module 12Hp Silver Panel

4ms Quad Clock Distributor Eurorack Module 12hp Silver Panel

Product Code: eq136581
Availability: In Stock

$450.00 $585.00

Qty

11 reviews Write a review

Description
Reviews (11)

Expand the capabilities of your clocking system with the silver 4ms Quad Clock Distributor Expander Kit, a DIY, four-channel expansion module for the clock divider/multiplier module in Eurorack format. The QCD expander adds a ton of features and is capable of turning the QCD into a programmable nonlinear sequencer.

Each channel gets a CV Trigger Delay (pulse width) jack and knob, an additional output jack with three selectable modes, and attenuverters for all CV input jacks. Self-patched evolving rhythms and swing/shuffle patterns are easily obtained, as well as complete control over standard rhythmic patterns. The QCD Kit includes all the components needed to complete the module as well as a silver panel.

Full DIY Kit Intermediate/Advanced Build Adds Features to Each QCD Channel Four Multimode Output Jacks (INV Out) INV OUT: 3 Mode Switch Delayed Trigger, Inverted Gate, Shuffle PW/Delay Knob Controls Trigger Delay/PW CV Input with Attenuverter Control Div/Mult Attenuator Knob Great for Precision Modulation Speed

Key Specs
Sound Generation	Analog
Maximum Polyphony	Not Specified by Manufacturer
Audio I/O	No
MIDI I/O	No
CV/Gate I/O	4x 1/8" / 3.5 mm TS CV Input 4x 1/8" / 3.5 mm TS Gate/Trigger Output
Patch Points	No
Eurorack Current Consumption	44 mA on +12 V Rail 30 mA on -12 V Rail
Horizontal Pitch	12 HP
General
Item Type	Eurorack Module
Sound Generation	Analog
Keyboard	No
Expression Controls	No
Number of Pads	No
Display	No
Sounds
Maximum Polyphony	Not Specified by Manufacturer
Built-In Effects	No
Built-In Speaker	No
Synthesis
Oscillators	No
Mixer	No
Amplifiers	No
Envelopes	No
Filters	No
Sequencing & Recording
Sequencer	No
Arpeggiator	No
Connectivity
Audio I/O	No
Pedal Support	No
MIDI I/O	No
CV/Gate I/O	4x 1/8" / 3.5 mm TS CV Input 4x 1/8" / 3.5 mm TS Gate/Trigger Output
Patch Points	No
Sync I/O	No
Network I/O	No
USB I/O	No
Media/Memory Card Slot	No
Audio Performance
Included Software	No
Mobile App Compatible	No
Power
Power Requirements	Eurorack Power
Eurorack Current Consumption	44 mA on +12 V Rail 30 mA on -12 V Rail
Physical
Color	Silver
Horizontal Pitch	12 HP
Included Accessories	No

Includes all the parts necessary to build a full-featured QCD Expander
Intermediate/Advanced-Level Kit: Soldering proficiency required
Tools Needed (Not Included):
- Soldering iron, solder
- Flush snips
- Needlenose pliers (for removing a component if you make a mistake)
- 5/16" and 3/8” socket driver (optional: pliers will work too if you're careful)
- Multimeter (for reading resistor values if you don't know the resistor color-code chart)

Multi-mode output jack INV OUT mirrors the tempo of main QCD output
Mode Switch for each INV OUT jack:
- Delayed Trigger Mode
- Inverted Gate Mode
- Shuffle Mode (delayed + original trigger)
PW/Delay knob controls trigger delay time on INV OUT jack (or pulse width in Inverted Gate Mode)
- Also controls Pulse Width of main QCD OUT jack
- CV input jack for external control
- Attenuverter allows for one channel to precisely modulate another channel's delay or pulse width
Div/Mult CV attenuator knob
- Controls how much the signal on the main QCD's Div/Mult CV jack will modulate the tempo
- Useful for precisely modulating the speed of one channel with another
Global LED brightness can be adjusted from the front panel

12 HP Eurorack format module
Maximum Depth: 0.98" (25mm)
Includes power ribbon cable with 10- to 16-pin Eurorack power headers
Incudes 16-pin ribbon connection cable to QCD
Power consumption: +12V: 44mA, -12V: 30mA

Related Questions and Answers

Q: 1. Does this collapse flat? If so, will it fit in case that dracast provides with the 1500 series

A: Yes, this softbox does collapse flat and would fit in the same case as the LED 1500 panel.

Q: 2. Is the cover weather proof to protect the cargo inside the wagon in case it rains?

A: This model does not come with a cover for the top. From the sides the nylon is water resistant but not weatherproof.

Q: 3. What is the part number for the white, translucent Perspex shooting surface?

A: That would be the Manfrotto Plexiglass Panel Only for Large Still Life Shooting Table (79 x 49") BH #MA220P. https://bhpho.to/3tNICDK

Q: 4. Would it be safe to plug this into a Furman M-8x2 so that this unit could benefit from the M-8x2's power conditioning and surge protection?

A: Yes, it should be safe to connect a Furman D10-PFP to a Furman M-8x2.

Q: 5. Do the alarms have the ability to be set for specific days of the week? For instance, with my current clock radio I have one alarm set for Mon-Fri and the other set for Sat-Sun.

A: The RCR-20 does not allow you to set alarms on specific days of the week.

Q: 6. Does it able to carry a pelican case, light stand, studio light, camera gears, and more?

A: Yes, can handle up to 120lbs.

Q: 7. Does this device support YouTube? Can you cast videos from YouTube on to this device?

A: Supports YouTube Music only. No video.

Q: 8. What is the diameter of What is the diameter of the wheels?

A: The diameter of the wheel is 7".

Q: 9. How does it attach to fixture?

A: It has velcro type attachements.

Q: 10. Is the electric connection 110/220 Europe and Israel (220) compatible or only made for the USA (110)?

A: Hello, The AC adapter of the Lenovo Smart Display has an input capacity of 100V-240V 1.3A 50-60Hz, is Dual Voltage, and ships with a USA compatible wall side plug. To use the Smart Clock outside the USA, you will need a wall side plug adapter, compatible with the country the Smart Clock will be used in.

Austin	25/09/2024
[Analog] I have been using this as a source for automated modulations and a sweeping sweet-spot finder in my patches, overall it frees up some sends for me and I find cool sounds faster 5

Scott	12/09/2024
[Eurorack Power] If you're looking for a straightforward, rack-mounted, 10-out power distributor, this is a good one. I use them in all the racks I build if I need more plugs. 5

Jonathan	03/09/2024
[Eurorack Power] Really fun module. You can sample into it from outside your rack. Cool stuff 5

Mark B	28/08/2024
[Silver] Just got this and it's working exactly as expected. The build quality is average, but it's only $$!! I am using this in a club install to boost my DMX signal and split it into different zones. Easy set-up, and even has a 5 pin DMX input and thru (I am using mainly 2 pin, but it's nice to have the option). The indicator lights are very handy (you can see that DMX is being transmitted to a specific channel). This is my first Blizzard product, so far so good. 5

Bob	04/08/2024
[Analog] I installed this unit last week and it worked without problems. I am using four of the outs and everything is working as expected. The unit is built well and the price is great compared to others I looked at. If you need a DMX distributor I highly recommend that you try this one. 5

John	21/06/2024
[Eurorack Power] It's a strip of power outlets. 5

dj DAVE	07/06/2024
[Analog] I ran 12 LED par 64 on 1- ch 12 led on the other 4 led bars on another 4-chauvet spot 350 on another & 2-hurricane foggers on another channel & still had 3- channels left NO PROBLEMS this thing is AMAZING 8ch DMX gotta have one .... AWSOME ... thinks B&H .... 5

Derrick	06/06/2024
[Silver] exactly what I need. 5

Jeffrey	03/06/2024
[Eurorack Power] I like that the outlets are far enough apart to plug things in and still have room for your fingers to hold the plug. Other manufacturers cram them together, but this power distributor is great! 5

Milos	17/04/2024
[Eurorack Module] Great keyboard, works as intended - and a good amount of options under the hood. Will your keyboard be a bit messier looking? Sure..but a really cool way to customize exactly what you want your perfect 4-voice poly/paraphonic instrument to do. And yes you can go beyond 4 voices using its midi outputs. All in all a pretty cool way to incorporate a case and keyboard in one. 5