Providing a basic power readout and no user interactive surfaces, the Anton/Bauer Titon 90 Gold Mount Batteries GM2 Charger Kitcan be used to power your Gold mount camera or other pro video gear. The lightweight lithium-ion chemistry can provide up to 10 amps of current on a continuous draw and support peaks of up to 12.5 amps for five seconds. At the side of the chassis, an LCD display screen shows battery capacity in percent remaining, and when put under load it shows the exact remaining runtime. Using the D-Tap and USB ports you can power essential accessories on your rig or other small electronics.

Official B&H 50th Anniversary Edition    4 x 92Wh Li-Ion Gold Mount Batteries    GM2 Dual-Bay Charger with 4-Pin XLR Out    P-Tap and USB Accessory Ports    Simultaneous Charging and XLR Output

For those who prefer a basic battery without multiple display window options and mode selections. Additional information can be accessed and displayed via select Anton Bauer chargers (not included).

The built-in display shows remaining power as percent. When the battery is connected to a camera or light, or otherwise put under load the display changes to show the remaining runtime. This information is available in most professional camera EVFs.

The Titon Gold mount battery supports a continuous 10A total draw between the Gold mount, D-Tap, and USB ports. It will support a 12.5A draw for up to five seconds to accommodate the high-power draw (power inrush) of devices when they start up. The battery capacity is 92Wh.

The battery uses high-quality cells and robust electronics for power distribution and safety.

It has a working temperature range of -4 to 140°F, although temperatures below 40°F can greatly reduce battery performance.

The case is made from an ABS/polycarbonate blend.

The battery can be charged with Dual or Quad Gold mount LP and Performance chargers.

You can also use other Anton Bauer chargers, as well as common competitive chargers; however, not all features and modes may be accessible with these other charges.

Related Questions and Answers

Q: 1. Is this Battery compatible with the Aputure Light Storm LS C120D II (Gold Mount) ? Thanks

A: That battery is compatible with the addition of the plate. See the link below. https://www.bhphotovideo.com/c/product/1259292-REG/intellytech_175000_anton_bauer_gold_mount.html

Q: 2. Does this battery work with other v mount chargers, or only Anton Bauer?

A: You can also use V-Mount Battery Chargers from different brands with this battery. However, not all features and modes may be accessible with other chargers. For best performance Anton Bauer recommends their Performance Series Dual Charger V-Mount, B&H # ANPDC. https://bhpho.to/2NM9tcn

Q: 3. How long does it take to charge the Titon SL 150?

A: The Anton/Bauer Titon SL 150 143Wh 14.4V Battery (Gold Mount) can recharge in 4.5 hours using a product like the Anton/Bauer GM2 Dual-Bay Charger with 4-Pin XLR Output (Gold Mount). See the link below: https://bhpho.to/3mF1cwK

Q: 4. Will this battery work with the URSA Mini Pro 4.6K with V mount plate?

A: Yes it will.

Q: 5. does it work for sony fx6 ? what is the difference between this and the Anton/Bauer Titon Micro 150 V-Mount Lithium-Ion Battery

A: With an appropriate power distribution plate, the Anton Bauer Titon SL 150 143Wh 14.4V Battery (V-Mount) would be able to power a Sony FX6, however the camera does not natively support V-mount batteries. The Titon micro batteries are smaller in form factor, but do not feature the peak draw of 12A that the Titon SL features.

Q: 6. Will this work for the JVC GY-HM700 camera?

A: No, the camera has a V-lock battery mount so you will need the V-mount version of that battery: https://www.bhphotovideo.com/c/product/1466925-REG/anton_bauer_8675_0132_titon_90_v_mount_lithium_ion.html

Q: 7. Will this battery work with the older Anton Bauer InterActive 2000 charger?

A: According to Anton Bauer, the Anton Bauer InterActive 2000 (also known as The Q-2702) will work with the Anton Bauer Titon 90 Gold Mount Lithium-Ion Battery, with Firmware: 5.9. Please see Anton Bauer's chart for more details: https://www.antonbauer.com/media/14843/gold-mount_compatibility-matrix_web.pdf

Q: 8. Does this work with the ARRI Amira?

A: The Anton/Bauer Titon SL 150 143Wh 14.4V Battery has a nominal voltage rating of 14.4V. This is within the ARRI Amira input voltage range of 10.5 – 34 Volts.

Q: 9. Does it charge well? Anton Bauer Dual 2722 Power Charger

A: Yes it should work, you may just need updated firmware on the charger.

Q: 10. Does this work with bmpcc 4k?

A: Yes, The Anton Bauer Titon SL 90 could adapt and power many camera models using DTAP power cables. When using the following adapter cable you can power the Pocket 4k , 6K and Pro. BH #INCDTB4K. You could also mount the battery on a camera cage and 15mm rods with this V-Mount adapter BH #INVMBP4K