Based on the XIO platform, the Gra-Vue XIO 9001VSD-RC 2 x 3 SD-SDI / ASI Signal Distribution Amplifier provides dual SD-SDI signals for input, and distributes each of them to 3 outputs with re-clocking. This amplifier supports SD-SDI input signals with embedded audio and automatic input detection of 525i 60 and 625i 50. It can also process and distribute ASI signals.

The XIO 9001VSD-RC Distribution Amplifier provides automatic signal equalization and re-clocking for long cable applications. This improves the signal quality and reduces signal loss caused by long distance transmission of input sources. The LED lights on the module indicate the status of input signals and power supply to let you know the signal status immediately. The distribution amplifier also supports SNMP and can be real-time managed and monitored via the XIO NET Network Management Module (sold separately) via Ethernet.

2-Channel SD-SDI signal inputs & 3-channel SD-SDI signal outputs with re-clocking

Supports automatic input detection of 525i 60 and 625i 50

Supports SD-SDI signals with embedded audio

Supports processing and distribution of ASI signals

Supports hot swap plug

Broadcast quality with inner 10-bit processing

Provides automatic signal equalization and re-clocking for long cable applications

Features LED lights to indicate the status of signals and power supply

Supports SNMP, and can be real-time managed and monitored by XIO NET (sold separately) via Ethernet

Can be mounted in a 1 or 3RU configuration

Related Questions and Answers

Q: 1. I just read Bass, Treble, and Balance Controls YET if you look at the photo of the face --NO bass, NO treble, NO balance controls? Where are they?

A: To get to change the Bass, Treble, Balance, there is a button labeled Audio Functions press it and it goes thru all three choices to you can change it to how you like it.The EQ button gives you optional pre set sounds Classical, Flat, Pop, Jazz, JazzRock sounds best to me.I just wished it allowed 2 sets of speakers. I always make sure I turn the speakers down to off before I snap it off or on, so I don't blow anything..

Q: 2. How do you access the quick key to change output resolutions?

A: Settings for the Gra-Vue MIO MVS-4HDMI Mini HDMI Input Multi-Viewer with DVI Output can be changed by navigating to the IP address assigned to the device in a web browser when connected to the same Ethernet network and using the web interface.

Q: 3. does include the power supply?

A: Yes, the attached power adapter is included in the box.

Q: 4. In the specs, it says input formats are 720p, 1080i, and 1080p. I need a quad processor that can handle a 1080p input and three 1024x768 VGA inputs (OK to have HDMI adapters in play but must be able to get 1024x768 4:3 ration video in. Will this work?

A: The MIO MVS-4HDMI will not accept or detect a 1024 x 768 signal. It will only work with the listed inputs.

Q: 5. Hello, about our SD1141, why the led light goes from green to blue after a couple of minutes then the video suddenly drops? How am I going to resolve this issue?

A: What kind of video signal are you sending through the AVMATRIX 1x4 3G-SDI Distribution Amplifier? For technical assistance it is better to reach out to us at customersupport@bhphoto.com

Q: 6. Muist the output match the input, or are there options to change it? For example, the input would be 1080P 25pfs, but I want the output to be 1080i 60 fps.

A: This input and output will have to match. This product is not a frame rate and standards converter.

Q: 7. will it do 1600 by 1200 25p HD-SDI?

A: I'm afraid this does not support 1600x1200 at 25p. It does support 720p at 50/60 along with 1080p at 24, 25, 30, 50 and 60.

Q: 8. Is there a way to output both sources at the same time Creating 2 inputs with 3 outputs each

A: We’re afraid not. It has an A/B switch to select with SDI input you use for the outputs of the DA. You cannot split it out in that way.

Q: 9. Will the MVIO Test Signal Generator support inclusion into a 1080p59.97 system?

A: The manufacturer does not list 1080p, only 1080i comparability.

Q: 10. Can more than one booster be used on the same cable? I want to see if I can send an HD signal over 400Ft

A: I can't answer that but I can tell you that I could not get ours to work right until I moved it from the source to the end termination point. A midpoint insertion did not work either. I suspect it has something to do with standing waves.