4Ms Tapographic Delay Eurorack Module 18 Hp

4ms Tapographic Delay Eurorack Module 18 Hp

Product Code: eq136741
Availability: In Stock

$1,245.00 $1,992.00

Qty

19 reviews Write a review

Description
Reviews (19)

Generate complex rhythmic structures with the 4ms Tapographical Delay (TAPO), a complex multi-tap delay in Eurorack format with a unique interface designed for live performance. The TAPO excels at transforming simple audio signals (drone or percussive sound) into complex rhythmic structures, meshes or organic textures, lush harmonic mille-feuilles, liquid and resonant effects.

The TAPO is designed to be played in real time rather than a set and forget end-of-chain effect. It's expressive, experimental nature is made for interaction. The TAPO ships with a ribbon power cable and mounting screws.

Multi-Tap Audio Delay Line Velocity-Sensitive Force Senor for Tap Up to 32 Taps Each Tap: Delay Time, Amp/Filter, Pan Low Pass or Resonant Band Pass Filters Morph Between Delay Configurations Two Feedback Paths: Repeat and Feedback Save and Recall Up to 24 Delay Configs Gate Output Plays Rhythm of Delay Includes Power Cable + Mounting Screws

Key Specs
Sound Generation	Analog
Maximum Polyphony	Not Specified by Manufacturer
Audio I/O	1x 1/8" / 3.5 mm TS Unbalanced Mono Instrument Input 2x 1/8" / 3.5 mm TS Unbalanced Mono Instrument Output (1 Stereo Pair)
MIDI I/O	No
CV/Gate I/O	5x 1/8" / 3.5 mm TS CV Input 2x 1/8" / 3.5 mm TS Trigger Input 1x 1/8" / 3.5 mm TS Gate Output
Patch Points	9x 1/8" / 3.5 mm Input 3x 1/8" / 3.5 mm Output
Eurorack Current Consumption	125 mA on +12 V Rail 32 mA on -12 V Rail
Horizontal Pitch	18 HP
General
Item Type	Eurorack Module
Sound Generation	Analog
Keyboard	No
Expression Controls	No
Number of Pads	No
Display	No
Sounds
Maximum Polyphony	Not Specified by Manufacturer
Built-In Effects	Delay
Built-In Speaker	No
Synthesis
Oscillators	No
Mixer	No
Amplifiers	No
Envelopes	No
Filters	No
Sequencing & Recording
Sequencer	No
Arpeggiator	No
Connectivity
Audio I/O	1x 1/8" / 3.5 mm TS Unbalanced Mono Instrument Input 2x 1/8" / 3.5 mm TS Unbalanced Mono Instrument Output (1 Stereo Pair)
Pedal Support	No
MIDI I/O	No
CV/Gate I/O	5x 1/8" / 3.5 mm TS CV Input 2x 1/8" / 3.5 mm TS Trigger Input 1x 1/8" / 3.5 mm TS Gate Output
Control Voltage Level	Trigger/Clock In: +12 V Gate In: +8 V
Patch Points	9x 1/8" / 3.5 mm Input 3x 1/8" / 3.5 mm Output
Sync I/O	1x 1/8" / 3.5 mm TS Clock Input
Network I/O	No
USB I/O	No
Media/Memory Card Slot	No
Audio Performance
Frequency Response	20 Hz to 20 kHz -7.8 dB 20 Hz to 10 kHz -2.3 dB 20 Hz to 5 kHz ±0.1 dB
Maximum Input Level	22 V p-p
Maximum Output Level	17 V p-p
Included Software	No
Mobile App Compatible	No
Power
Power Requirements	Eurorack Power
Eurorack Current Consumption	125 mA on +12 V Rail 32 mA on -12 V Rail
Physical
Color	Silver
Horizontal Pitch	18 HP
Included Accessories	No

Velocity-sensitive force sensor to tap the delay configurations (tapographies)
Up to 32 taps, each with its own delay time, amplitude/filter, and panning
Low-pass filter or resonant (pingable) band-pass filter on each tap
Morphing between delay configurations, with adjustable morph time
Two different feedback paths: a Repeat toggle and a Feedback knob
Save and recall up to 24 delay configurations (4 banks of 6 slots each)
Tapography sequencer with forward, random walk or random directions
Synchronization to an external clock, with clock divider/multiplier
Gate output that plays the current rhythm of delays
Maximum delay time of 174 seconds (almost 3 minutes)
16-bit / 48 kHz with 32-bit floating-point internal processing, 1.3 ms software latency
Mono-in, stereo-out operation
18 HP Eurorack module

18 HP Eurorack format module
Maximum Depth: 0.98" (25mm)
Includes power ribbon cable with 10- to 16-pin Eurorack power headers
Power consumption: +12V: 125mA, -12V: 32mA

Related Questions and Answers

Q: 1. Will it work with the Pentax K-1?

A: No, it will not work with the Pentax K-1. The system is compatible for use with Canon, Nikon, Sony, and Olympus/Panasonic cameras.

Q: 2. Is this v3 quieter than the v2 I purchased, which at over 35% makes loud buzzing sounds?

A: The edelkrone Slide Module v3 is quieter than the v2.

Q: 3. I understand the IR beam transmitter can be set to a high or low setting. Does the transmitter go into a low power stand-by mode when not being activated? For example, if this was set up over-night would the battery quickly drain? Thanks!James B.

A: I would recommend not keeping the device on while it is not in use.

Q: 4. Can I use "edelkrone Pan Pro" with the "edelkrone Sony NP-F Battery Bracket" ?

A: Although the Edelkrone Pan PRO comes with a Canon LP-E6 battery plate. the Edelkrone Power Module for V-Mount (or Gold Mount), could be used for additional power options. This is what Edelkrone suggests. https://bhpho.to/38R68rz

Q: 5. Hello, do you have the PocketWizard PowerMC2 using the Frequency version that is CE 433.42 - 434.42 MHz ? Because my PocketWizard TT1 and TT5 is adopting the Frequency CE 433.42 - 434.42 MHz ?

A: Unfortunately, we do not carry the CE frequency triggers. All of the Pocket Wizard transmitters and receivers we sell are made with frequencies for the USA market. We do not offer any Pocket Wizard (or related products) with the European frequency.

Q: 6. - How effective is it to capture lighting strikes from thunderstorms at evening/night? And at daytime?- It seems it doesn't come with any cable, right?What exact cables do I need to trigger: Canon 5D Mark 3, Canon 70D and Panasonic Lumix G7?- What is the maximum number of shots that this can take using intervalometer mode?Thank you!!

A: there is a light sensor in the main promodule unit. the other piece is the IR module for ustilizing a wide ir beam to trigger. the sensitivity is adjustable for both light and sound as well as a built in delay of shutter release. To connect to either of those cameras there are two options, hard wire connection of pro module to camera utilizing the HL capcord set. or if you purchase the HL -CAPTUR C you then have wireless connection. PLease see www.hahnel.ie for in depth PDF's of how to connect.

Q: 7. Will this work with the Nikon D5000?

A: yes

Q: 8. It says the Captur system is available separately. My wife bought me the Captur Module Pro for Christmas, but we can't find the Captur System. I have a Sony a7rII. What am I missing?

A: HL CAPTUR S

Q: 9. Will it work with Sony alpha cameras?

A: Yes, it is compatible with Sony Alpha's.

Q: 10. Do these work with the new DigiBee from Paul C Buff?

A: Incase you haven't gotten an answer or others looking for a straight answer. No they do not work with DigiBees. I tried it personally myself with no luck.

trickstress	12/09/2024
[Analog] Alright I'm a Korg fan. Have the Monotron Duo, which is awesome especially since you can play it in tune, but the Delay is extra amazing. It is way more versatile than any youtube video would lead you to believe...just subtle alterations of the knobs open gateways to truely otherworldly sounds. Think 50s science fiction movies. I use a Nintendo DS stylus on the ribbon controller, works better than fingers. Excellent machine at an unbeatable price for making burbling, crazy noises to compliment your tracks. Pure fun. 5

Pierr	24/08/2024
[Silver] remember to split your eurorack modules even on the buss power, you have second row and you can put your power hungry modules in that row, also you get about 70mm depth on the bottom row as there is no obstruction from the bus board, use modular grid to sort out the arrangement, I got this in 2 days from B&H, incredible timing. Thank You Guys !! 5

Jonathan	21/08/2024
[18 HP] Really fun module. You can sample into it from outside your rack. Cool stuff 5

Milos	14/08/2024
[Analog] Great keyboard, works as intended - and a good amount of options under the hood. Will your keyboard be a bit messier looking? Sure..but a really cool way to customize exactly what you want your perfect 4-voice poly/paraphonic instrument to do. And yes you can go beyond 4 voices using its midi outputs. All in all a pretty cool way to incorporate a case and keyboard in one. 5

Austin	06/08/2024
[Delay] I have been using this as a source for automated modulations and a sweeping sweet-spot finder in my patches, overall it frees up some sends for me and I find cool sounds faster 5

Jakub	06/08/2024
[22 V p-p ] Works great, 30 delays, and 15 reverb types. Easy to use. 5

Rick S.	21/07/2024
[Silver] Hours of fun creation! 5

Black Flatbush	19/07/2024
[22 V p-p ] Sound wave surfer devise. I would recommend it as first synthesizer or a meditation tool. Love that it works on batteries lots of fun anywhere. You can take it outside, to your job, school or a park. Great gadget! 5

Staxman	03/07/2024
[Eurorack Power] After searching for weeks for the right delay I finally settled on the timefactor and could not be happier. I use it 2 ways, as the last effect on my pedalboard with stereo INS and stereo outs feeding two amps and from the send to the return of each of two amps. The timefactor works great in both uses. The ability to choose the mix of both dry and delay is great. The ability to use two seperate delay lines is like having two delay lines in one. I also like the three options for bypass type allowing you to use the peal as a buffer in your chain or going full true bypass. For the money this is one of the most versatile units available, and with the quality of eventide behind it, you cannot go wrong. 5

Steve	26/06/2024
[Eurorack Power] Absolutely dead on emulations. Not to mention expandability thru usb c as well as a solid construction build. An absolute deal at this price for a hardware/software unit of this magnitude 5