The 4K 60Hz HDMI Switcher with USB, Hotkey, Mic & Speakerfrom 4K 60Hz HDMI Switcher with USB, Hotkey, Mic & Speakerenables you to connect up to four computers using a single keyboard, mouse, and an HDMI monitor. This switcher supports up to UHD 4K60 YUV 4:4:4 resolution video, HDR, 3D, and CEC functions. It has four HDMI 2.0 and four USB-B inputs, one HDMI output, a 3.5mm mic input, embedded audio pass through, and a 3.5mm de-embedded audio output.

4 x HDMI 2.0 & 4 x USB-B In/1 x HDMI Out    Supports up to UHD 4K60 Resolution Video    Front-Panel & Hotkey Keyboard Switching    Embedded Audio Output via HDMI    3.5mm Mic Input & 3.5mm Audio Output    HDR, 3D & CEC Support    Supports LPCM, DTS, Dolby Digital Audio    Up to 6 Gb/s per Channel Bandwidth

Four independent HDMI and USB-B inputs enable you to connect up to four PCs and output video to an HDMI display

Related Questions and Answers

Q: 1. Can I connect Google Chromecast (hdmi dongle) to this device with the intent of sending the hdmi output to a projector AND then going toslink/digital audio out to an audio receiver?

A: The quick answer is yes.... However if your only use is to bring in 1 HDMI source and go to toslink then there are other products that will also work, if you are bringing in multiple sources and sending them to your projector and audio system then this is a great box...

Q: 2. Is there a delay between switching inputs? I want to use this as a video switcher for a livestream and a lot have a black screen for a few seconds while switching sources.

A: Yes, there is a delay consisting of a few seconds when switching between sources. Additionally, you must scroll through the sources (you can not jump from source 1 to source 4 in a one-click/button fashion. I use this device in front of a professional HDMI switcher (Roland V1-HD) if more than 4 cameras are required and a delay can be allowed between transitions of cameras behind the 5in1 (while the transition delay is occurring another camera from the remaining three HDMI ports is on.)- Jack

Q: 3. Does this come with the power supply?

A: Yes, the MuxLab 5x1 HDMI Switcher with 4K Support comes with a 5V DC power adapter.

Q: 4. Will it send audio through the HDMI out and through the TOSLINK/3.5mm outputs at the same time?

A: Yes, you will be able to send audio through the HDMi outputs and separate 3.5mm & Toslink audio outputs.

Q: 5. Can I use this switchers with OBS to switch between my dslr cameras?

A: No. This switcher works as a selector. The input you choose is the one that is send, but if you switch from one input to another, the switching is not seamless and will probably give you a second of black in between. OBS will not control this unit.

Q: 6. If this is used to switch between two monitors - one set to "duplicate" and one to "extend" the display - will those settings be retained for each? (currently using a splitter that makes all inputs appear the same to the PC, doesn't retain individual monitor settings)

A: This product will only work with the signal it is given. If you have the output from your computer set up to be a duplicate of the desktop, it should see that. If it is set up to extend the desktop it should see that. Those settings should be on the computer itself.

Q: 7. Can this switch accommodate HDMI cables that are 50' or longer?

A: This switcher works with an HDMI signal up to UHD 4K at 30fps. However the switcher itself has no impact on the length of the cable it is being used with. In general, standard HDMI cables send a signal around 25 feet.

Q: 8. I want to see if I can use this for streaming. If I connect 3 HDMI cameras to the device, what would be a good way to check the camera feed before I make it live?

A: I dont know.

Q: 9. does the switch hold sync on inactive port? if I switch away form a port, does the device on the inactive port thinks that there is no display attached it it?

A: Hi, I have the switch installed with 4 different devices to one single projector. When I change away from device 1 to device 2, I dont know what device 1 does until I get back to it. When I do, device 1 outputs to te projector with no issues.So, to summarize my experience: I can change from any device to any other device back and forth and I have had no issues in doing that.Hope it helps.

Q: 10. Will it support an SACD player output?

A: Yes I think it will support SACD