The black, redesigned Manfrotto MT190CXPRO3 Carbon Fiber Tripodfrom Manfrotto MT190CXPRO3 Carbon Fiber Tripodbuilds on the success and popularity of the previous 190 series with professional hardware and convenience features that make it even easier to use than its predecessor. When the three leg sections and center column are fully extended, the tripod reaches a maximum height of 63", and its load capacity of 15.4 lb makes it a good choice for larger cameras. The tripod weighs 3.5 lb, and folds down to 24" for transport.

Set up is faster than ever with Manfrotto's Quick Power Lock System that allows you to completely extend the tripod legs with just one hand. Once set up you can use the MT190CXPRO3's rapid center column in standard vertical mode or swing it into horizontal position like a boom with Manfrotto's 90° Column feature. Enlarged tabs on the individual leg angle selectors allow you to get down to only 3.5" for macro work with the column in horizontal mode. And once you're down there you can attach any of Manfrotto's flexible or articulated arms to hold lights or reflectors via the Easy Link plug built into the tripod's spider.

Convenience features include a bubble level that rotates so that you can see it easily regardless of the tripod's position. Finally, Manfrotto's insistence on form following function has yielded a tripod that you'll not only be happy to use but you'll be happy to be seen with, too.

Load Capacity: 15.4 lb    Maximum Height: 63"    Minimum Height: 3.5"    Folded Length: 24"    Leg Sections: 3    Weight: 3.5 lb    90° Column Feature    (QPL) Quick Power Lock for Legs    Individual Leg-Angle Settings    Easy Link Plug

The Quick Power Lock (QPL) system is one of the most eye-catching and unique features of the redesigned 190. It is a strong, ultra fast, ergonomic locking system that allows for complete extension of the legs with one hand.

One of the most innovative aspects of the 190 series is its compactness, which allows for easier portability. The redesigned patented 90° Column is accessible whenever you need it with simple one finger operation.

The plug allows instant connection between tripod and accessories, such as LED lights for macro photography and DSLR video applications using Manfrotto articulated arms and brackets.

The bubble is easy to read, whatever the shape of the head or however the tripod is positioned. Just rotate it towards you for easy viewing.

Each leg has user selection of four angles to accommodate uneven ground or rough terrain. The selectors are manufactured according to most innovative ergonomic standards to prevent fingers and nails being trapped in the upper casting.

Related Questions and Answers

Q: 1. Will this tripod hold a weight of a little over 10lbs without shaking or vibrating in the wind?

A: The Manfrotto MT190CXPRO3 Carbon Fiber Tripod is rated for up to 15.4 lb. So this can comfortably hold 10 lb.

Q: 2. Hi would like to know if this head will fit on the 190x legs. Thanks

A: The base diameter of this head is significantly larger than the top plate of the 190x legs (80mm vs 60mm) so it will overlap. But it will attach. This head was designed with the larger 057 legs in mind.

Q: 3. is there an option for the Head to be a bowl instead of flat?

A: There is an adapter that you will need to use to use bowl heads on a flat base tripod such as the 057. Take a look at the Manfrotto 325N Video Head Adapter, which will allow you to use a 75mm or 100mm half bowl on a flat base tripod with a 3/8 thread: http://bhpho.to/1paQ8Rm

Q: 4. what size is the top attachment screw?

A: The head mounting screw is 3/8"-16.

Q: 5. Can somebody please tell me the diameter of the ball on the Manfrotto 057 Magnesium Ball Head ? Thank you.

A: The diameter of the ball is 70 mm, a bit hard to measure, but as close as I could get.

Q: 6. Do the legs, at least the lower sections, have measurement markings?

A: No.

Q: 7. can you change center colume for a short one?

A: There is no short column needed because the center column can be set to 90 degrees. That makes the column shorter in a sense and allow you to set the tripod as low as 3.5 inches.

Q: 8. Is there a way to place a weight hook on the bottom of the center column?

A: Unfortunately, the MT190CXPRO3 would not be capable of accepting a hook at the end of the column.

Q: 9. The specs indicate rubber feet. Can Manfrotto spikes replace those and be inserted into the legs?

A: That I don't know, but I will tell that I do not recommend this tripod. It started to fall apart after relatively heavy use in about 5 months. Get a gitzo. There are worth it.

Q: 10. Is this head arca Swiss compatible?

A: No, Manfrotto 501 plate only.