Power a USB-C accessory when using it with a cage or other rig and an Advanced Side Handle with this Tilta 12V USB-C to 3.5mm DC Power Cable Right-Anglefrom Tilta. The cable features a male USB-C connector on one end and a male right-angle DC barrel connector on the other. This 15.7" long cable provides 12V power to a USB-C accessory such as the DJI Lidar system using a Tilta Advanced Side Handle or power source with a 3.5mm DC barrel output. It is rated to provide more power to your accessory than standard USB-C cables.

Power Accessories Like DJI Lidar    Designed for Tilta Advanced Side Handles    USB-C to 3.5mm DC Barrel Connectors    Right-Angle DC Barrel Connector    Provides 12V Power to Accessory    Measures 15.7" in Length

Related Questions and Answers

Q: 1. how long does the Ronin S battery last while using this Set up for pocket 6k?

A: The Ronin-S has a battery rated at 34 Wh. The battery the Ronin-S normally used is 12-14 Wh. You will get near 3 times the battery time. However the Ronin-S itself will be draining the battery, but at a much slower pace.

Q: 2. Does this regulate to 12 volts?

A: This does not regulate power. You use it with devices that self regulate.

Q: 3. Will this power the BMPCC 6K?

A: Yes, this will work with the Pocket 6K as well.

Q: 4. Can this also power the Nucleus-M motor (and not just the Nano?)

A: The Tilta Nucleus-Nano 12V Ronin-S To 5V Micro-USB Motor Power Cable (B&H# TIWLCT04PCRN) is designed for and will work only with the Tilta Nucleus-Nano Wireless Lens Control Motor BH #TIWLCT04M).

Q: 5. Can this cable work on the new Ronin S2 gimbal?

A: This is specifically designed to work with the DJI Ronin S.

Q: 6. Could this power the Red Komodo?

A: It should work according to published specs, but we have not tested this particular combination.

Q: 7. would this power the feelworld f6 plus safly when plugged into the dtap port from the smallrig 99w v mount battery?

A: No, you won't be able to fully insert the DC barrel from the IndiPRO Tools D-Tap to Locking 2.1mm DC Right-Angle Cable (24") into the FeelWorld F6 Plus 5.5" 4K HDMI Monitor since the monitor does not have a locking connector. Consider the Watson Pro D-Tap to 2.1mm Barrel Cable (19") as an alternative cable. The monitor accepts voltages between 7 to 24 volts. See the link below: https://bhpho.to/3zjOvuz

Q: 8. Will this work for the Holland Mars 400S?

A: The manufacturer recommends the 'Hollyland D-Tap to 2.1mm Barrel DC Power Cable for Mars 300/400/400S/4K/Cosmo C1' to power the 'Hollyland Mars 400s' via D-tap. The link to this item is below. https://www.bhphotovideo.com/c/product/1564082-REG/hollyland_hl_d_tap_spring_wire_d_tap_to_dc2_1_spring.html

Q: 9. would this work with the small hd 702 touch to deliver power from a v mount battery?

A: Here is the recommended power cable soluiton form SmallHD. SmallHD LP-E6 Dummy Battery with D-Tap to Barrel Cable BH #SMPADPDCA5KT • MFR #PWR-ADP-DCA5-KIT(---- Please copy and paste either number into a B&H search box) On back order. no ETA at this time.

Q: 10. Do you have to use a dummy battery when using this cable, or can the battery slot remain empty?

A: The battery slot remains empty.