Tilta Battery Plate For Dji Remote Monitor V-Mount

Tilta Battery Plate For Dji Remote Monitor V-mount

Product Code: eq138214
Availability: In Stock

$213.30 $292.22

Qty

9 reviews Write a review

Description
Reviews (9)

Power your DJI High-Bright Remote Monitor using a professional, long-life battery with this V-mount Tilta Battery Plate for DJI Remote Monitor V-Mountfrom Tilta. The plate mounts onto the monitor using 1/4"-20 screws and provides a secure, quick release mount for a separately available V-mount battery. The lightweight, compact plate is made from durable aluminum.

Power DJI High-Bright Remote Monitor V-Mount Battery Plate Secure Mounting with Release Pins 1/4"-20 Mounting Screws Aluminum & Silicone Construction

Key Specs
Camera Power Method	Battery Plate Mount Type
Plate Front / Battery Mount	V-Mount
General
Camera Power Method	Battery Plate Mount Type
Plate Front / Battery Mount	V-Mount
Plate Rear Mount	Proprietary Battery Plate
Number of Battery Bays	1
Material of Construction	Aluminum, Stainless Steel
Dimensions	5.4 x 3.5 x 2" / 138 x 90 x 51 mm
Weight	8.7 oz / 246 g
Packaging Info
Package Weight	0.705 lb
Box Dimensions (LxWxH)	6.3 x 4.8 x 2.7"

Related Questions and Answers

Q: 1. Can this be use for Canon C200 16.7 volt , I dont see any output ?

A: To power the Canon C200 with the Tilta Universal Battery Plate (V-Mount), a cable such as the Kondor Blue D-Tap to 4-Pin Coiled Power Cable for Canon C200/C300 Mark II, B&H # KOBDTPFLEM4P, would be needed.

Q: 2. I'm confused by the answer to the previous question....If I attach a V-Mount battery to this plate, will it provide power to the Gimbal via the pins on the tilta advanced ring?

A: Yes, if you attach a V-mount battery to this plate, it will provide power to the gimbal via the pins on the Tilta Advanced Ring. The pins are not connected to the side handle controls and so 18650 batteries are needed.

Q: 3. I can install two of this to hot swap v-mount battery? Will it fry my gimble?

A: Yes, you can install two of the Tilta Battery Plates for DJI RS 2/RS 3/RS 3 Pro Ring Grip (V-Mount) in order to hot swap on the Tilta Pro Ring Grip. The system will regulate the power.

Q: 4. Will this provide power to the ring while the ronin grip also provides power? Is there risk of a short circuit?

A: Yes, the Tilta Battery Plate for DJI RS 2 Ring Grip will provide power to the ring while the BG30 Grip will also provide power. There is no risk of a short circuit.

Q: 5. If you have this battery plate attached, with a suitable vlock battery, can you remove the top handle (incl battery) completely?

A: If the Tilta Battery Plate for DJI RS 2/RS 3/RS 3 Pro Ring Grip (V-Mount) is installed on the Tilta Advanced Ring Grip for DJI RS 4, RS 4 Pro, RS 3 Pro, and RS 2 Gimbals with a powered V-Mount battery, the DJI battery can be removed. The top battery handle adapter is not designed to be removed from the ring.

Q: 6. My SWIT 98 watt battery is not powering my gimbal. Is it the wrong battery?

A: As long as you are able to properly mount your battery on this plate, there should be no issues with your SWIT battery, unless the product in question is not functioning properly.

Q: 7. Does the BG30 Grip sums its Wh capacity with a V-Mount battery capacity when using this battery plate? For example, 30Wh of BG30 Grip + 144Wh of V-Mount battery = 174Wh

A: Yes, when feeding power from a V-mount battery on the Tilta Battery Plate for DJI RS 2 Ring Grip (V-Mount) to a DJI Ronin BG30 Grip the duration of the power would be equal to that of the battery grip and the V-mount battery added together, assuming the BG30 is fully charged.

Q: 8. Is this a pass through power NP style connector? Can it be used to upgrade any np mount? Would like to use this to adapt power.

A: The Tilta Battery Plate for DJI Remote Monitor (Gold Mount) does use the DJI Remote Monitor's NP-F battery plate for power pass through, and partially for mounting, but the issue when attempting to use it with other products with NP-F power ports would be the mounting part, as this plate is also designed to line up with the DJI High Bright Remote monitor's cage, where it would be screwed into place using a 1/4"-20 screw. If you were to use this plate with other devices it would mount into the NP-F battery receiver, but it wouldn't have the 1/4"-20 connection to help support the weight of the heavier batteries, and could cause damage to the device's NP-F receiver. So it isn't really advisable to use the Tilta Battery Plate for DJI Remote Monitor (Gold Mount) with other devices.

Q: 9. Will this fit on the rs3 pro?

A: The Tilta Battery Plate for Power Pass-Through Plate for DJI RS 2 (V-Mount) will not mount on the DJI RS3.

Q: 10. How do I connect a monitor to this plate that requires 12 volt (like the BM video assist?))

A: The Tilta Universal Battery Plate (V-Mount) is not meant for use with a monitor. A plate like the IDX System Technology P-VS2 V-Mount Battery Plate BH #IDPVS2 is recommended.

Dylan V	06/09/2024
[0.705 lb] I have been using this plate on my DJI Remote Monitor for about 6 months now, hundreds of hours of use and I have never had any issues! I highly recommend! 5

Sam	23/08/2024
[V-Mount] This goes with the Tilta power passthrough. I recommend it for any larger/heavier camera. When coupled with a moderate sized/weight battery, this also serves to offset the center of gravity quite a bit and makes balancing simpler. 5

Jason	19/06/2024
[V-Mount] Secure v-mount. Battery is secure and doesn't feel like it will disconnect. Used a handful of times without any issues. 5

Armin	19/05/2024
[V-Mount] Fits perfectly and snugly on the monitor. Perfect upgrade if you already have gold mounts. 1x 98wh battery lasted me nearly 7 hours with this plate for the DJI monitor! 5

Osku	11/05/2024
[V-Mount] I'm using mine with FXLion V-mount batteries which are smaller and lighter and provide for all-day shooting with the Tilta Ring. It's solid metal and very well made. 5

Vincent	26/04/2024
[0.705 lb] This Tilta battery plate is a must for the DJI Remote Monitor. It's very compact, easy to install, and works as intended. For the price it's a no-brainer. 5

Eliazar	23/04/2024
[V-Mount] Seems they have redesigned the mount. The mount is now exactly like the vmount version. I have full clearance with my Rs2. Super happy with my purchase! 5

heath	03/04/2024
[V-Mount] This is a must have for the advanced ring grip. Not only does it hold a v mount firmly but it sends power through the tubes to power the RS2/3, the grips and up to the top where you can use the power module kit dtap and usb outs. 5

Armin	01/04/2024
[1] This is a perfect compliment to the monitor. The handles fold out so you can place the monitor on a table or flat surface for easy viewing if you don't have a stand. Nice soft touch handle. Really quick and easy to remove. Highly recommend! 5