Smallhd Ultra 5 Bolt 6 Rx 750 Monitor Red Dsmc2 V-Mount

Smallhd Ultra 5 Bolt 6 Rx 750 Monitor Red Dsmc2 V-mount

Product Code: eq138363
Availability: In Stock

$10,947.30 $15,435.69

Qty

9 reviews Write a review

Description
Reviews (9)

Add an ultra-bright monitor to your production rig with the SmallHD ULTRA 5 Bright Touchscreen Monitor, which features a 3000 bright cd/m² display for viewing in just about any indoor or outdoor environment. The 5" 1920 x 1080 touchscreen LCD provides a sharp image and 10-bit 4:2:2 Rec. 709 color processing, ideal for focus pulling and image analysis on set and in the field.

The ULTRA 5 features HDMI and 3G-SDI inputs and outputs, and it also features physical buttons for use in conditions that might require gloves. It can also be used to control your camera, features a 5-pin USB port for optional RED camera control, and has an Ethernet port for optional ARRI and Sony VENICE camera control. All the functionality of the monitor is available via PageOS 5, which provides advanced functionality with a simple and efficient graphical user interface.

ULTRA 5 Bolt 6 RX 750 Monitor Camera Control Kit for RED DSMC2 Control Camera with License and Cable V-Mount Battery Plate 5" 1920 x 1080 Touchscreen Display

Key Specs
Display Size	5.0" / 12.7 cm
Native Resolution	1920 x 1080
Touchscreen	Yes
HDR Support	No
Video I/O	1x BNC (3G-SDI) Output 1x HDMI (Unspecified Signal) Output 1x BNC (3G-SDI) Input 1x HDMI (Unspecified Signal) Input
Video Format	SDI (10-Bit 4:2:2) 1080p: 60/59.94/50/30/29.97/25/24/23.98 1080PsF: 30/29.97/25/24/23.98 1080i: 60/59.94/50 720p: 60/59.94/50/30/29.97/25/24/23.98 480i 576i HDMI (8/10/12-Bit) UHD 4K: 30 1080p: 60/59.94/50/30/25/24/23.98 1080PsF: 30/25/24/23.98 1080i: 60/59.94/50 720p: 120/119.88/100/60/59.94/50/30/25/24/23.98 576p: 100/50 480p: 120/119.88/60/59.94 480i: 240/239.76/120/119.88/60/59.94 576i: 200/100/50
Battery Type	No
Mounting	6x 1/4"-20 Female
Display
Panel Type	LCD
Display Size	5.0" / 12.7 cm
Native Resolution	1920 x 1080
Aspect Ratio	16:9
Touchscreen	Yes
Maximum Brightness	3000 nits / cd/m²
Color Support	1.07 Billion Colors (10-Bit)
HDR Support	No
Pixels Per Inch (ppi)	443 ppi
Color Gamut	100% DCI-P3
Image Controls	Blue Only, False Color, Focus Peaking, Image Flip, Pixel-to-Pixel Zoom, RGB Parade, Screen Markers, Waveform
Inputs / Outputs
Video I/O	1x BNC (3G-SDI) Output 1x HDMI (Unspecified Signal) Output 1x BNC (3G-SDI) Input 1x HDMI (Unspecified Signal) Input
Embedded Audio	HDMI SDI
Audio I/O	1x 1/8" / 3.5 mm Headphone Output
Built-In Speaker	No
Power I/O	1x LEMO 0B 2-Pin (2.1 A / 34 VDC) Input
Other I/O	1x LEMO 5-Pin Output 1x RJ45 Output
Wi-Fi	No
Bluetooth	No
Mobile App Compatible	No
Format Support
Video Format	SDI (10-Bit 4:2:2) 1080p: 60/59.94/50/30/29.97/25/24/23.98 1080PsF: 30/29.97/25/24/23.98 1080i: 60/59.94/50 720p: 60/59.94/50/30/29.97/25/24/23.98 480i 576i HDMI (8/10/12-Bit) UHD 4K: 30 1080p: 60/59.94/50/30/25/24/23.98 1080PsF: 30/25/24/23.98 1080i: 60/59.94/50 720p: 120/119.88/100/60/59.94/50/30/25/24/23.98 576p: 100/50 480p: 120/119.88/60/59.94 480i: 240/239.76/120/119.88/60/59.94 576i: 200/100/50
Power
Input Power	10 to 34 VDC at 2.1 A
Battery Type	No
Mounting
Mounting	6x 1/4"-20 Female
General
Certifications	CE, FCC, IC, RoHS
Material of Construction	Aluminum
Dimensions	5.9 x 3.4 x 1.3" / 150 x 86 x 34 mm
Weight	1.1 lb / 504 g
Packaging Info
Package Weight	1.985 lb
Box Dimensions (LxWxH)	9.5 x 7 x 2.5"

Daylight-viewable, 5" touchscreen on-camera monitor with 3000 cd/m² brightness

Slim, lightweight design with 10-bit 4:2:2 DCI-P3 color, touchscreen LCD panel

HDMI and 3G-SDI inputs and outputs

Buttons around the monitor allow you to use the monitor in any conditions

The PageOS 5 toolset with EL Zone Exposure Assist, best-in-class waveform, false color, Look-Around Camera Control (sold separately), advanced Teradek RT overlays, and more

Four 1/4"-20 mounting threads on the left, right, bottom, and back of the monitor

Power using a 2-pin power input

Optional RED camera control via the micro-USB port

Optional ARRI/Sony VENICE camera control via the Ethernet port

Durable aluminum chassis

Related Questions and Answers

Q: 1. What's the power draw at full brightness when transmitting and not transmitting?

A: According to our details from SmallHD, the SmallHD ULTRA 5 Bolt 6 TX 750 Monitor has a power draw of 7W.

Q: 2. Will this control kit work with Burano?

A: No, the SmallHD ULTRA 5 Bolt 6 TX 750 Monitor with Control Kit for Sony VENICE (BH #SM160529VEK) is designed for use exclusively with the Sony Venice.

Q: 3. Hi. Does it have Komodo functions and menu? Thanks

A: No, it does not. Only the "SmallHD Focus Pro with the Red Komodo Control Kit" can control the Red Komodo

Q: 4. whats the max brightness when the bolt 6 rx activated because in my cine7 there is limit when it attached to the rx 70% bright ?

A: SmallHD does not list the SmallHD Ultra 5 Bolt 6 RX 750 Monitor Kit (V-Mount) as changing its brightness. Regarding the Cine7, SmallHD cautions "*Some monitors will default to Studio Brightness if the power source (voltage) is low to help save energy. Change power sources to allow for Full Backlight capabilities."

Q: 5. How do you remove the antennas?

A: The antennas on the SmallHD ULTRA 5 Bolt 6 TX 750 Monitor are removed by gripping the base of the antenna and rotating counter clockwise to unscrew the antenna from the monitor.

Q: 6. Hello, can you please confirm that this will work with B&H#TE102101V? I'd like to invest in the 4K60 TX module in hope that a better RX module will be released in the future.

A: Yes, all Teradek Bolt 4K receivers and transmitters are compatible with each other.

Q: 7. Will this receive signal from a Bolt Pro 300 TX?

A: No, the Teradek Bolt 6 RX 750 Monitor Module for Smart 7 Series (V-Mount) is not compatible with the Teradek Bolt Pro 300 3G-SDI Wireless Transmitter-Receiver Set.

Q: 8. Would this work with Sony FX3?

A: Yes, the SmallHD 702 Touch 7" Monitor with Bolt 6 Monitor Module 750 RX Kit (V-Mount) could work with most any camera. Please note you will need to add a Teradek transmitter and V-mount battery to power the display, as well as an HDMI cable. Teradek Bolt 6 LT 750 3G-SDI/HDMI Wireless Transmitter BH #TE102261 IndiPRO Tools 4 x Micro-Series 98Wh Li-Ion V-Mount Batteries with Dual-Battery Charger Kit BH #INVMP98SCK (B&H Kit) ZILR ZRHAA03 Hyper Thin Ultra High-Speed HDMI Cable with Ethernet (17.7") BH #ZIZRHAA0345

Q: 9. Is it possible to remove the antennas for ease of packing?

A: The two antennas on the SmallHD ULTRA 5 Bolt 6 TX 750 Monitor are removable.

Q: 10. Will this wirelessly transmit video with camera control as well or just the image alone?

A: Yes, both video and control are supported with select camera models. The SmallHD ULTRA 5 Bolt 6 TX 750 Monitor can also be used to control your camera, and it features a 5-pin USB port for optional RED camera control, and it also has an Ethernet port for optional ARRI and Sony VENICE camera control.

anyonymous	26/09/2024
[443 ppi] I see most of the negative reviews are from the ARRI side. However, with the Komodo this monitor has been great. The Control OS has been great and very easy to use. I think it’s a good investment considering the functionality of the touch screen and the price. I used to always use 5 inch monitors but when it comes down to it the extra size helps out so much for critical focusing. The build quality is top notch, just make sure you get a screen protector. My screen protector cracked but without it who would have known what may have happened. 5

Theresa	22/08/2024
[Aluminum] Great monitor out of the box. the right-angle camera control cable for the ARRI Alexa Mini LF is kinda impossible to fit with the RAB. I wish it was angled the other way. 5

Philip	22/08/2024
[LCD] Love the cross compatibility features as well. Really don't love the nonstandard Phillips slots on the GM plate. Soft metal and very easy to strip out. 5

Marshall Media	06/08/2024
[100% DCI-P3] Does this Job 5

Brett	29/07/2024
[Yes] I was able to get my hands on the first batch of these monitors and it did not disappoint. It's built like a tank, bright enough for broad daylight work and makes modifications on the fly smooth sailing. High price tag but you get what you pay for. 5

Mar	24/07/2024
[Yes] This in combination with the wooden camera mount and a goldmount d-tap adapter will make your work flow made easy 5

Alex	16/06/2024
[Yes] I bought 2x for my Canon c70's, I have them paired with the Wooden Camera Hinge for the c70, the custom function buttons adds great speed to my work flow. 5

Robert	17/05/2024
[HDMI SDI] This monitor is awesome. Love the intuitive touchscreen functions, love the camera control add-ons, love how it looks. It does scare me how hot it gets though. Could definitely fry an egg on this thing. I hope the heat doesn't affect longevity. 5

Robert	11/05/2024
[HDMI SDI] I bought this for my RED V-Raptor. Why didn't I just get the RED monitor? They are basically the same price! Let me explain... The RED monitor is fantastic. One cable, attaches directly to the camera, user buttons, well built, and only slightly more expensive. BUT... I can only use the RED monitor version of the Cine 7 on a RED camera. And if you think I am going to spend 3K on a monitor that I can only use on one camera, you have another thing coming. With this monitor, yes, I need two cables instead of one. That is where the shortcomings stop. The Cine 7: 1. Can use on any camera. Any camera! 2. Still have complete camera control. 3. 500 more nits of brightness. Yes, 500! And it does make a difference. 4. A little bit cheaper. 5. Want Arri camera control? Yep, for $500 you have Arri camera control too. 6. With the RED monitor on an Arri camera you would have a paperweight. You get a better monitor that you can use on any camera. I attach the monitor directly to the RED top handle using the SmallRig Swivel and Tilt Monitor Mount with ARRI-Style Accessory Mount. Perfect. 5