[Yellow] Excellent holder made with quality materials! Holds many if the smaller lights

[Plastic] perfectly attached to my belt.

[Yellow] The aluminum housing plus 3/8 in diameter, allow this to drop down my flintlock rifle for inspection after cleaning. The light illuminates the bore and verifies that you cleaned the rifle properly. As a handheld flashlight, so-so.

[Yellow] I couldn't find maglites in Northern California. So I tried a bunch of the flashlights available in the local hardware stores. Most if not all had push button on/off switches that turned on in my bag or pocket.
Maglites on/off mechanism is far superior.

[Yellow] These clamps are great. Totally solved my wire issues. The whole process was painless from ordering to arrival

[Plastic] I use this headlamp everyday, my work requires me in the dark. Its durable and inexpensive. Bright and 3 batteries last quite a while

[Yellow] Simple to use, and creates a uniform light level, with no hot spots. I use if for jeweley photography.

[Plastic] Full Disclosure: Coast provided me this S10 sheath in order for me to test it out. But, everything I will talk about in this review is my own opinion.

Coast Portland was not given copy approval nor any editorial input in this review. That means, they're reading this review for the first time along side you.

These are the topics I will cover. Skip to whatever corresponding number in order to read about that specific topic and find what you are looking for.

1) Build Material

2) Fastening System

3) Protection Level

4) Belt Loop

5) What I Disliike/Would Change

6) Final Thoughts
____________________________

The Individual Topics Begin Here:
____________________________

1) Build Material:

• Thick nylon front, back, and flap. Elastic sides
____________________________

2) Fastening System:

• Velcrow
____________________________

3) Protection Level:

• Flap over flashlight head

• Nearly full body protection
____________________________

4) Belt Loop:

• Fixed in place with no velcro quick disconnect

• Accommodates all common belt widths. 1.25 inch (31.75mm), 1.5 inch (38.1mm), or slightly larger

• No D-Hook
____________________________

5) What I Disliike/Would Change:

• I dislike the velcro closure. The velcro wears out rather quickly. I would have much preferred a snap button closure
____________________________

6) Final Thoughts:

Overall. I think It is a well made holdster. Nice and compact; slim-line and elegant. The only con being the use of velcro for the closure flap as the velcro wears out a bit easily. A snap button closure would have been a more premium choice in my opinion. The holdster is a bit tight at first, but it breaks in very nicely over time. I like that the belt loop is fixed on both ends as it makes it impossible for it to accidentally come off your belt if tugged on. At its very affordable price, I highly recommend it.

[Plastic] Great solution for your messy carbine light tape switch wires, fast shipping good customer communication.

[Plastic] Great flashlight holder nice product