From Sonifex AVN-AESIO8 Dante Interface PoE AES3 I/Oconverts up to eight AES3 inputs and eight AES3 outputs to and from the Dante Audio-over-IP networking standard. Each input can accept sample rates from 32 kHz to 192 kHz, which will be sample-rate converted to the Dante system sample rate. A valid input signal is confirmed by a front-panel AES3 lock LED for each input. All outputs follow the Dante system sample rate. This 1 RU rackmount unit offers an easy solution for AV professionals and system integrators.

Converts 8 AES3 Inputs & 8 AES3 Outputs    32 kHz to 192 kHz Sample Rate per Input    Front-Panel AES3 Lock LED for Each Input    Outputs Follow Dante System Sample Rate

Related Questions and Answers

Q: 1. Can you route (via Dante Controller) separately to Headphone and Line Out? As in, are they separate Dante Receivers, or do you send it one signal and both headphone and line out get the same signal?

A: The AM2 has 2 channel I/O which means you can both listen to , and monitor 2 Dante channels. There is no way to split them up between the headphone out and line out.Thank you for your question.

Q: 2. Would this work with Yeti microphones?

A: This will not work with a Yeti mic. This is designed to allow a connected computer to send and receive audio over a Dante network.

Q: 3. Can I pair two consoles together using a NY64-D expansion card without having a Tio1608-D in place? We want to share channels 1-16 on board 1 with board 2 (programmed as 17-32), and vice-versa.

A: By connecting both consoles via a Dante network you will be able to share information with any other device on the network.

Q: 4. There'er 16xlr in and 8 out physical patches, does the dante add to the inputs & outputs or does it replaces the physical i/o?

A: No, the Yamaha DM3-D Digital Mixing Console with Dante physical inputs on the console act as the Dante routed channels to be connected to a compatible stage box or other Dante compatible devices. Pages 34 - 39 in the manual illustrate this, https://bhpho.to/4c4Z3ig.

Q: 5. Can you record at high speed from SD1 to SD2?

A: You can copy a file from SD1 and save it to SD2. No additional recording required.

Q: 6. Is this compatible with 01V96 mixers?

A: Unfortunately it will not work with the 01V96 mixer. That expansion is only made for the TF series.

Q: 7. Is there a specific POE injector needed for this to work?

A: Dante AVIO adapters require a Power over Ethernet switch, or an 802.3af compliant PoE injector. Here is an option for a possible switch B&H # CISG35010K9, and injector BH #MIPD3501GAC.

Q: 8. Can you choose between mic and line for the xlr outputs?

A: No. The analog XLR outputs on the Yamaha DM3-D Digital Mixing Console supply line level output.

Q: 9. I am running the TF5 with the N 64 card but can only access 40 channels how do I access the full 64 on the console

A: I am using this on a TF1. The TF boards seem to be limited to 1 to 1 routing of the Slot channels (Slot 1 goes to fader 1). For the TF5 it looks like you can only have access to 48 channels of the Slot so you cannot use all 64 at the same time. You could, however, use the Dante Controller to change the routing of the channel matrix to get access to channels other than 1-48.

Q: 10. Does this work with clubhouse? i.e. 2x1 BT connected to POE switch onto Comp USB-C output to iPhone with Clubhouse on in addition to recording from said phone

A: I do not see this as a workable solution.