Lumens Vc-A71Sn 4K Ndi/12G-Sdi Ptz Camera Black

Lumens Vc-a71sn 4k Ndi/12g-sdi Ptz Camera Black

Product Code: eq138618
Availability: In Stock

$10,485.00 $14,049.90

Qty

6 reviews Write a review

Description
Reviews (6)

With NDI|HX3 and FreeD technology, the black Lumens VC-A71SN 4K NDI/12G-SDI PTZ Camera Blackfrom Lumens VC-A71SN 4K NDI/12G-SDI PTZ Camera Blackdelivers UHD 4K video with professional color protocols in broadcast studios, concert halls, and VR/AR set applications. The camera's 1/1.8" 9.17MP CMOS sensor outputs UHD 4K video via its 12G-SDI, HDMI, USB-B, and IP ports. Other features of the camera's lens include 30x optical zoom and 12x digital zoom.

Control for the camera can be achieved via the USB-B 3.0, Ethernet, RS-232, or RS-422 connections or with the included remote control for flexible installation and intuitive setup. Adjust pan, tilt, and movement speed manually. A 3.5mm audio line input can add a microphone to the camera's interface. Power can be delivered via the DC input port or via Ethernet using PoE++.

1/1.8" 9.17MP CMOS Sensor Capture up to UHD 4K Video NDI|HX3 Support 12G-SDI, HDMI 2.0, USB & IP Outputs 30x Optical Zoom, 12x Digital Zoom FreeD VR/AR Protocol IP Interface with PoE++ Power & Control BT.2020/Rec.709 Color Gamut 3.5mm Audio Input RS-232/RS-422 Serial Control

Key Specs
Image Sensor	1/1.8"-Type CMOS
Sensor Resolution	Effective: 9.17 Megapixel
Shutter Speed	1/10000 to 1 Second
Optical Zoom Ratio	30x
Max Digital Zoom	12x
External Recording Modes	SDI/BNC / HDMI 3840 x 2160 at 25/29.97/50/59.94 fps 1920 x 1080p at 25/29.97/50/59.94 fps 1920 x 1080i at 50/59.94 fps 1280 x 720 at 50/59.94 fps USB 3840 x 2160 at 30.00 fps 1920 x 1080p at 30.00 fps
Broadcast Output	NTSC/PAL
IP Streaming	H.264, H.265, MJPEG, MPEG-TS, NDI\|HX2, NDI\|HX3, RTMP, RTMPS, SRT 3840 x 2160 at 59.94p (2.0 to 20.00 Mb/s) 1920 x 1080 at 59.94p (2.0 to 20.00 Mb/s) 640 x 360 at 29.97p (0.5 to 5.0 Mb/s)
Supported Control Protocols	NDI Pelco-D RS-232 RS-422 VISCA
PoE Support	PoE++ 802.3bt
Mounting	1x 1/4"-20 Female for Tripod
Imaging
Image Sensor	1/1.8"-Type CMOS
Sensor Resolution	Effective: 9.17 Megapixel
Built-In ND Filter	No
Focus Control	Autofocus Manual Focus
Exposure Control
Shutter Speed	1/10000 to 1 Second
Gain	0 to 45 dB
Signal-to-Noise Ratio	50 dB
Minimum Illumination	0.05 Lux
Flip / Mirror Support	Image Flip, Mirror (Vertical)
White Balance	Range: 1700 to 10,000K Presets: One Push, Indoors, Outdoors, Manual, ATW, Auto
Lens
Focal Length	6.5 to 202mm
Optical Zoom Ratio	30x
Max Digital Zoom	12x
Field of View	Horizontal: 63 to 3.7° Vertical: 35.4 to 2.1° Diagonal: 72.3 to 4.2°
Maximum Aperture	f/1.6 to 4.8
Minimum Focus Distance	4.9' / 1.5 m
Video Capture
External Recording Modes	SDI/BNC / HDMI 3840 x 2160 at 25/29.97/50/59.94 fps 1920 x 1080p at 25/29.97/50/59.94 fps 1920 x 1080i at 50/59.94 fps 1280 x 720 at 50/59.94 fps USB 3840 x 2160 at 30.00 fps 1920 x 1080p at 30.00 fps
Embedded Audio	HDMI/NDI/USB
Audio Recording	AAC Audio G.711 Audio
Broadcast Output	NTSC/PAL
Gamma Curve	Rec709, Rec2020, Standard
IP Streaming	H.264, H.265, MJPEG, MPEG-TS, NDI\|HX2, NDI\|HX3, RTMP, RTMPS, SRT 3840 x 2160 at 59.94p (2.0 to 20.00 Mb/s) 1920 x 1080 at 59.94p (2.0 to 20.00 Mb/s) 640 x 360 at 29.97p (0.5 to 5.0 Mb/s)
Control
Presets	256
Move Speed	Pan: 0.01 to 300°/sec Tilt: 0.01 to 300°/sec
Movement Range	Pan: 340° (-170 to 170°) Tilt: 120° (-30 to 90°)
Tally Light	Yes
Supported Control Protocols	NDI Pelco-D RS-232 RS-422 VISCA
Interface
Video I/O	1x HDMI 2.0 Output 1x BNC (12G-SDI) Output 1x USB-B 3.0 / 3.1/3.2 Gen 1 Input/Output 1x RJ45 Input/Output
Audio I/O	1x 1/8" / 3.5 mm TRS Stereo Mic/Line Input
Other I/O	1x DIN 8-Pin (RS-232) Input 1x DIN 8-Pin (RS-232) Output 1x Block 9-Pin (RS-422) 1x RJ45 (Ethernet) 1x USB-B (USB 3.2 / 3.1 Gen 1) Video
Power
PoE Support	PoE++ 802.3bt
Power I/O	1x Barrel (12VDC) Input
Power Consumption	PoE: 27.5 W Power Supply: 27 W
General
Mounting	1x 1/4"-20 Female for Tripod
Certifications	FCC Part 15 Class A, ICES-003, EN55032
Security Lock Support	Kensington Lock Slot
Dimensions (W x H x D)	7.4 x 9.1 x 7.4" / 188 x 232 x 189 mm
Weight	6.6 lb / 3 kg (Body Only)
Packaging Info
Package Weight	11.76 lb
Box Dimensions (LxWxH)	17.3 x 13.7 x 11.2"

NDI|HX3 support to deliver video with low latency directly to NDI networks
12G-SDI output port delivers UHD 4K at 60 fps for fast motion and smooth video
BT.2020/Rec.709 color gamut for wide and precise color reproduction
Supports FreeD protocol for use with VR and AR video production sets without need for additional sensors
340° pan, 120° tilt, 300°/sec movement speed, 256 preset positions

Related Questions and Answers

Q: 1. Are these cameras fully compatible with a Marshall Electronics VS-PTC-IP IP PTZ controller?

A: Not this model, but the Marshall Electronics VS-PTC-IP IP PTZ controller is compatible with these Panasonic, Panasonic WV-ASF950W Panasonic WV-ASFE951W Panasonic WV-ASM200 Panasonic WV-ASM300W Panasonic WV-XAE100W

Q: 2. Can this camera be used for live stream via HDMI and be used as a security camera at the same time via multi-streaming?

A: Yes, the Canon CR-N500 Professional 4K NDI PTZ Camera with 15x Zoom offers multiple streaming output codecs that would stream simultaneously even if the camera is outputting from HDMI to another source.

Q: 3. Is it possible to load custom LUTs onto this camera?

A: The Canon CR-N500 does not allow you to load LUTS into the camera. However, The camera does support Canon Log 3 profile which could be corrected with LUTS when editing recorded footage in post..

Q: 4. Which functions can you remotely control over VISCA?

A: You are able to control almost everything through VISCA including: Movement/Presets Shading/Color Resolution Outputs We recommend that you use the Official Canon controller for this camera because we can not guarantee that you will have full control over all the features if you use a different controller.

Q: 5. does it use the same mounting plate as the UE/UN70?

A: The Panasonic UE100 works with the following wall mount that is specifically designed for the camera - https://bhpho.to/3uhy8wR

Q: 6. Outputting 1080HD, is it possible to use the full 4k image of this camera to select a close-up and a wide from the same camera?

A: Multiple views are not listed as a option by the manufacturer.

Q: 7. Does this have a built-in mic, for scratch audio?

A: No, the Canon CR-N500 Professional 4K NDI PTZ Camera with 15x Zoom (Satin Black) does not have a internal microphone, but you can connect a mic to one of the three audio inputs.

Q: 8. I use my current AW-HN40H PTZ HD camera to grab stills in 40 preset positions. Can I do this in SHD resolution via ethernet?

A: The Panasonic 4K NDI Pro 12G-SDI/HDMI PTZ Camera with 24x Optical Zoom (Black) can store/recall up to 100 preset positions.

Q: 9. I want 4Kp30, currently wired for SDI and POE ethernet. The CD-N500 SDI is limited to 1080. Is there a POE 4K HDMI to SDI converter I can use? I have several cameras for IMAG so do not want the latency of NDI|HX.

A: At this time there are no 4K HDMI to SDI solutions that support POE.

Q: 10. What are the low light numbers?

A: Panasonic does not state this camera's native ISO. However, according to the camera's manual in the overview section, you will be able to adjust the black balance. Here are some other facts that will affect its low-light performance: 1-Chip 1/2.5" MOS Sensor Maximum Aperture: f/1.8 to 4 Pg. 45: https://www.bhphotovideo.com/lit_files/633196.pdf

Jerry D.	14/09/2024
[30x] The camera is doing a great job with live-streaming our church service. We did have to down scale it for our provider but in time technology will improve in their end. The camera does not have any image stabilization so if you are zoomed in over a long range someone walking by will create a slight tremble in the image if you don’t have it mounted on something to absorb the shock. We are covering a distance of about 65 feet and it produces a great image for us. 5

Wendy	05/09/2024
[6.5 to 202mm] We are thrilled with our purchase of the NewTek NDIHX-PTZ1 NDI PTZ Camera from B&H! B&H was wonderful to deal with - knowledgeable and helpful! The camera is easy to set up and use. Quality is exceptional! 5

Edgardo	17/08/2024
[0 to 45 dB] I did a comprehensive review on YouTube going through the UI, Testing NDI latency, low light etc. I've use this with Sony PXW-Z90v cameras (also a 1 sensor) Pros: 4k NDI requires just ONE cable! Image Quality is better than the Sony PXW-Z90v (in low light) Works with eCamm Live (Mac) via NDI (plug and play) only 3 frame latency with NDI Fine motor movements Works with Mac Safari Browser Has XLR Inputs Cons: I wish these devices had a camcorder battery (I could rig this to be totally wireless) Does not have full NDI, so it isn't compatible with the Birddog Flex Initial setup is confusing Does not come with a lens cap (be careful when transporting) - two can fit in a Pelican 1637 case. If you want to use NDI with the ATEM or any other HDMI based switcher, you should get the Magewell Pro Convert NDI to HDMI adaptor here at BH Photo. My use case: I put this in the center of a dining area for a fundraiser that provided almost 360 degrees of coverage without obstructing the views for the audience. I paired this with a Skaarhoj PTZ Pro controller. Tip: When you first plug it in via HDMI, you will need to set a username and password via the web browser before you can use the camera. You'll have to find the IP address! I hope I can share the link to my overview video since it will give you a better perspective on all of the above! https://youtu.be/JTtYskJSrp4 5

Adam	25/07/2024
[30x] Reliable and high quality. 5

Chad	15/07/2024
[0.05 Lux] This was purchased for a church to stream services. We wanted 3 angles and so this was perfect. We added in an ATEM switcher and off we went. These cameras are easily set up with SDI cables and simple ethernet cables. Word of advice, the controller MUST be a similar IP as the cameras to work. By default it is nowhere near the cameras IP range. The cameras perform well in our lighting which I expect with the lens quality on these. I do get flares from bright lights which might can be fixed in the settings. Our total cost came out to slightly over $5000 for everything. You don't need a computer if you get a high end ATEM switcher, only a good monitor or TV which we had laying around. 5