Dahua Single-Port Eoc Extender Kit Receiver Transmitter

Dahua Single-port Eoc Extender Kit Receiver Transmitter

Product Code: eq138738
Availability: In Stock

$242.94 $291.53

Qty

13 reviews Write a review

Description
Reviews (13)

Convert power signals between Ethernet and coax cables with the Dahua Single-Port EoC Extender Kit Receiver Transmitterfrom Dahua Technology. Enhanced Power over Ethernet (ePoE) technology offers a cost-effective solution for transmitting power and data over long distances via Ethernet or coaxial cables. The transmission range for this device is up to 3280'. Additionally, it extends EoC transmission ranges over long distances to devices (edge or head-end) without ePoE. Repeaters are not required thanks to ePoE technology.

Receiver & Transmitter Kit Converts between Ethernet & Coax Cables Enhanced Power over Ethernet Transmission Range up to 3280' Extends EoC Transmission Range Functions without Repeaters

Electrical
Power Consumption	2 W
Supported IEEE Standards	802.3, 802.3af (PoE 15.4 W), 802.3at (PoE+ 30 W), 802.3u, 802.3x
General
Bandwidth	100 Mb/s
Inputs	1x RJ45 Female
Outputs	2x BNC Female
Number of Channels	1
Maximum Operating Distance	3280' / 1000 m
Physical
Dimensions	3.11 x 2.05 x 0.91" / 79 x 52 x 23 mm
Weight	1.34 lb / 0.61 kg
Environmental
Operating Humidity	5 to 95%
Operating Temperature	-22 to 149°F / -30 to 65°C
Packaging Info
Package Weight	0.2 lb
Box Dimensions (LxWxH)	4.5 x 3.2 x 3.1"

Plug-and-play operation

Ethernet over Coaxial (EoC) technology

Converts between Cat 5e/Cat 6 and coax cable transmission

Enhanced Power over Ethernet (ePoE) technology enables long distance power and data transmission via Ethernet or coaxial cables up to 3280'

Extends EoC long distance transmission to devices (edge or head-end) without ePoE

ePoE technology converts existing coax-based analog systems into IP systems, reducing cable & peripheral device requirements, saving you time & money

BNC Port

100M RJ45 Ethernet port

IEEE 802.3, IEEE 802.3u, and IEEE 802.3x network standards

Supports MDI/MDX self-adaptation

Lightning protection in common mode (4kV) and differential mode (2kV)

Related Questions and Answers

Q: 1. The transmitters keep getting very hot and the picture freezes..how can we overcome this?

A: Wireless video transmitters tend to get hot without much of a workaround. It might be best to move onto a system with built in heat syncs similar to teradek.

Q: 2. Is available in 80km

A: This unit is rated for 6 miles / 9.6 km. Since 80km is almost 50 miles, this is not your answer.

Q: 3. On the receiver, can you output from both the SDI and HDMI at the same time?

A: Yes, The Vaxis ATOM 500 RX can output from both the SDI and the HDMI port simultaneously.

Q: 4. what cable would I need to use this as a remote trigger for the nikon z6?

A: Being that the Nikon Z system cameras use the DC2 type remote connection, the PocketWizard N-MCDC2-ACC 3' Nikon Remote Camera Cable for Nikon, B&H # WICFTT5ND90 can be used to connect this remote to your Z6. https://bhpho.to/3b32dEp

Q: 5. Can I use this on a canon 6d mk ii?

A: The PowerSync Mini Digital Radio Slave System, the PS16-MINI-R Receiver from Impact is compatibe with the Canon 6D Mark ll and will allow manual triggering of flash units at distances up to up to 328'.

Q: 6. if tx is using hdmi, could rx transmit via sdi?

A: The RX could output via SDI or HDMI.

Q: 7. Can I use it with a Ricoh GRiii or Leica M10?

A: The PowerSync Mini Transmitter and Receiver Kit should be compatilbe with both the Ricoh GRiii and the Leica M10 cameras.

Q: 8. Will the transmitter work with Sony ZV-1? I would like to use it with a Godox TT350 as a slave flash. Thanks

A: The Impact PowerSync Mini Transmitter and Receiver Kit BH #IMPS16MINRTK would not be optimal for the TT350 and a ZV-1. Godox makes their own transmitters like the B&H # GOX2TS.

Q: 9. If I connected the transmitter to a video switch (e.g., ATEM Mini Extreme's HDMI-out port) could I connect the receiver to a projector (Epson LS500) and play compatible videos with sound?

A: Yes, Teradek Bolt 6 LT HDMI 750 Transmitter/Receiver Kit would be able to provide a latency free wireless HDMI connection between the Black Magic Atem Mini Extreme and an HDMI onput projector like the Epson LS500.

Q: 10. Cable USB to C type

A: You would want a usb mini cable... https://www.bhphotovideo.com/c/product/1387542-REG/tether_tools_cuc2415_blk_tetherpro_usb_c_to_2_0.html

Jamie	06/09/2024
[2x BNC Female] Great range, works way better than expected. I do need a USB-C to HDMI adapter to make it work, but that was expected. 5

Grant	27/08/2024
[1] I have purchased 1 set of these to replace coax SDI lines we needed to remove in favor of fiber. So far my initial tests are good. We are just using it for HD-SDI, but If they continue to work, I will purchase another set and this will give us 6 transmit and 6 receive signals on each end of our link using 4 strands of single mode fiber. They are virtually silent except a small fan on the side and use locking screw on power cables which is nice to prevent loss of power from a connector getting pulled out. Also they are VERY small and compact. We will use heavy duty Velcro to hold them on a rack shelf long term. You can't beat that capacity for the price. 5

edgar	25/08/2024
[0.2 lb] we bought these to relocate our presentation remote receiver close to the front of our church. we used a 100' cat6a cable, used a usb cable to connect from laptop to host, the a usb extension cable from client to remote receiver. Works perfectly. love that they are very compact, very easy to hide. 5

Jerzy	16/08/2024
[0.2 lb] So small (especially receiver) and works well. Great set combined with small flash units. Jerzy 5

Tim	12/08/2024
[0.2 lb] Just note that this are single channels per box. So you essentially used the SDI output as an additional out which is nice and saves us a DA. Took a chance on an unknown player and happy to say they worked. These are the same guys that own lilliput (shared a booth at NAB at least) 5

anyonymous	11/08/2024
[5 to 95%] The product worked as advertised. The product is small and was used on a USD serial device 100' away. Great value for the money. 5

Lindsay	23/07/2024
[1x RJ45 Female] This was my second purchase, I needed another receiver for an additional flash unit, the kit was the same price as just a single receiver, just made sense to buy another kit. 5

Varmanand	08/07/2024
[2 W] This product works the best in all the wireless ones i have tried. Very easy to install and setup. My users love this product. No complaints at all 5

Al	23/06/2024
[0.2 lb] This thing is not only bullet proof and driver free, it has an excellent image quality. A great solution for the "TV on the wall, but the table is in the middle of the room" conference room problem. No wires! 5