Keep your workspace tidy and well-organized with the THRONMAX S6 Twist Boom Arm Stand, an adjustable boom arm with a low-profile design for professional XLR broadcast microphones that keeps your desktop clean by hiding most of your cables and reducing the number of mounting points. The C-clamp affixes the boom arm to the edge of your desk with ruggedness and stability. Use the S6 to position your mic where you want it, and keep it firmly in place while you stream games, podcasts, or create content—doing so with a professional appearance at all times.

The Flex Stand S6 is made with a premium all-metal construction with a low profile design with an unobstructed look. Adjusting the boom stand is both easy and quiet. All friction hinges can be hand tightened—there is no need for tools to adjust the arm. With a 90° vertical arm rotation and 360° elbow rotation, the Twist facilitates all manner of mic positions. The Twist provides smooth camera integration for cameras with a 1/4" screw, as well as 3/8" and 5/8" screws, which support microphones, DSLR cameras, streaming lights, and more.

Podcasting, Streaming, Lighting    C-Clamp for Surface Mounting    Internal Springs    360° Arm Rotation    Integrated Cable Management    3 and 5.9" Extensions, Smartphone Holder    Supports Mics up to 5.5 lb    5/8"-27, 3/8"-16, 1/4"-20 Threads

• Premium all-metal, anti-torsional construction
• Low profile design for an unobstructed look
• Fully adjustable handle with swivel base
• Hidden cable trays with magnetic lid for easy access
• Tension-adjustable joints allow you to adjust sway and fall resistance
• 90° vertical arm rotation and 360° elbow rotation
• Reliable performance
• The 3/8" and 5/8" screw supports microphones, DSLR cameras, streaming light, and more
• Smooth camera integration for cameras with a 1/4″ screw
• Keeps your desktop clean by hiding most of your cables and reducing the number of mounting points

Related Questions and Answers

Q: 1. Would any usb-c wire work with this microphone?

A: The Sennheiser Profile USB Condenser Microphone Streaming Set with Boom Arm will work with USB-C cables which are capable of carrying both data and power.

Q: 2. Can a microphone be mounted on the tripod tube with the boom removed? What is the thread size of the tripod tube?

A: The threads on the tube of the K&M 25977 Tripod Microphone Stand with Telescoping Boom are 5/8"-27. The boom arm can be removed from the stand.

Q: 3. We need to mount this from a small hole in the middle of a desk. Does this have an option to put a bolt in from the bottom instead of the clamp?

A: This particular stand utilizes a C-clamp only. For a stand that could be screwed into a table, here's an option B&H # ROPSA1.

Q: 4. How much weight does it support?

A: This broadcast arm has a payload of 1.8 lbs.

Q: 5. Is it possible to mount a speedlight + umbrella on the boom arm? I'm comparing this to the Impact lightstand w/ boom ($79) and it's tricky to make a good decision.

A: Yes, a speedlight and umbrella can be mounted to this Impact Mid-Range Boom Arm by way of the Impact Deluxe Umbrella Mount with Adjustable Shoe, BH # IMDUBAS. https://bhpho.to/3VbKD8n

Q: 6. How long is the boom arm?

A: The SmallRig RA-C330 C Light Stand with Boom Arm BH #SMRAC330LS has a 50" arm.

Q: 7. I have a 1" Deep x 1.25" High edge on the front of my built-in desk. Can the boom arm be mounted securely? Thanks.

A: You would need a little bit more depth than 1" to mount the clamp securely.

Q: 8. Its rated for a max load of 5 lbs, are they being conservative or is 5 really all it can handle?

A: I use it for a Paul C Buff X3200 which is 7.l lbs and it's OK. Not at full extension, but I don't need the reach.

Q: 9. Will this work with the 6x Litepanel 1x with soft box?

A: Yes, it will, thou you will need to use a counter weight. I also wouldn't extend the thin last arm, just the main one. I've used it with a ad600 and a 38 softbox with no problem. YOu can always go with the bigger version if space isn't a factor.

Q: 10. Will this work with a Shure MV-7 microphone?

A: Yes, the Thronmax S1 can be used with the Shure MV7. The USB port on the MV7 is Micro-USB so you will need to use the Micro-USB adapter that is included with the S1 in order to connect the mic to the integrated cable. The integrated cable on the S1 is USB-C. The MV7 will attach directly to the 5/8" thread on the S1 (no thread adapters are needed).