The 67mm Urth Ethereal 1/4 Diffusion Lens Filter 67mmfrom Urth Ethereal 1/4 Diffusion Lens Filter 67mmdiffuses bright and close light sources to soften contrast and create a smooth haze effect. When used with modern digital cameras, the filter softens extreme sharpness and replicates the cinematic qualities of film photography. Part of the Plus+ range, the filter features 20-layers of nano-coating for easier cleaning and better protection against water, oil, and scratches. These layers also provide a higher maximum light transmission and a more consistent transmission curve for sharper images, finer colors, and greater depth.

Double-Threaded    Ultra-Slim Magnalium Rim    German Schott B270 Optical Glass    20-Layer Nano-Coating

The Ethereal 1/4 Diffusion Lens Filter Plus+ diffuses more light to create a stronger haze effect and contrast lift. It works best with bright and close light sources.

Soften extreme sharpness captured by modern digital cameras and replicate the cinematic qualities of film photography.

20-layer nano-coating provides neutral color balance, reduces lens flare, removes ghosting, and protects against scratches.

The filter is double-threaded for stacking filters or using screw-mount lens caps.

The consciously designed ultra-slim rim avoids vignetting.

It is built with German Schott glass for true light transmittance and supreme image quality.

Related Questions and Answers

Q: 1. Can a filter of the same thread diameter be used with the lens hood in place?

A: Yes, you can attach the filter to the lens first and then the hood on top or attach the hood first and then screw the filter into the hood.

Q: 2. I need t a new lens cap (original) for my AF-S Nikkor 18-200mm lens. Could you advise which size I should get? I can't see one specifically for that lens. Thanks

A: If you go to the BHPhoto web site and look up the Nikon AF-S DX NIKKOR 18-200mm f/3.5-5.6G ED VR II Lens specifications::You will see that the filter mount is 72mm. This is the size of the lens cap you should buy.

Q: 3. I have the AF-S Nikkon 85mm 1.8 G. I lost my front lens cap, which is the one I need?

A: The Nikon 67mm Snap-On Lens Cap is compatible with pretty much any lens with a 67mm filter thread. That being said, you could use it on the Nikon AF-S 85mm f/1.8G lens.

Q: 4. Which front lens cap fits the Nikon 24-120 lens?

A: 77 mm

Q: 5. For the 67mm, does it work with Tamron 28-75 2.8 RXD for Sony Full Frame? I saw a similar review but unsure if it was this specific lens.

A: My experiences only with a Canon G15 and a Bower 58mm lens adaptor AND this Rubber lens hood. Vignetting was bothersome at wide 28mm zoom position (widest for G15) My solution was to purchase a 58mm Sensei screw-on Tulip lens hood. Vignetting was much reduced but still can be seen slightly at the 28mm wide angle setting. By cropping the images, we can live with the problem.

Q: 6. Will this hood work with the Nikkor AF-S DX 18-300 f/3.5-6.3 ED VR lense? I see that some of the hoods available only work with specific zoom lengths.

A: The B+W 67mm #900 Rubber Lens Hood would fit onto the Nikon AF-S DX NIKKOR 18-300mm f/3.5-6.3G ED VR Lens as the lens has 67mm filter threads. However, as indicated under the Overview for the lens hood, the hood is designed for use with normal-length and short zoom lenses. I cannot guarantee the B+W 67mm #900 Rubber Lens Hood will cover the zoom range of the 18-300 f/3.5-6.3 ED VR lens. The rubber lens hood that would most closely match the zoom range of the Nikon 18-300mm lens would be the Hama 67mm Screw-In Rubber Zoom Lens Hood for 24mm to 210mm Lenses, B&H # HALHZ67. http://bhpho.to/1yuEumX

Q: 7. Can you use a lens cap with this lens hood attached? What size?

A: Yes, it is able to attach with a lens cap.

Q: 8. Which lens cap fits the AF-S DX NIKKOR 18-300mm 1:3.5-6.3 G ED VR?

A: I have the Nikon AF-S NIKKOR 70-300mm, 1:4.5-5.6 G and the Nikon 67 mm lens cap us what I use.

Q: 9. What lens cap fits the AF-S Nikkor 70-300mm lens?

A: This Nikon 67mm Snap-On Lens Cap will fit a Nikon AF-S 70-300mm f/4.5-5.6G ED IF Lens.

Q: 10. will this fit a z6ii 24-200 mm lens?

A: Yes, the Nikon 67mm Snap-on lens cap will accommodate the Nikon 24-120 lens.