The 67mm Urth Ethereal 1/8 Diffusion Lens Filter 67mmfrom Urth Ethereal 1/8 Diffusion Lens Filter 67mmdiffuses bright and close light sources to soften contrast and create a smooth haze effect. When used with modern digital cameras, the filter softens extreme sharpness and replicates the cinematic qualities of film photography. Part of the Plus+ range, the filter features 20-layers of nano-coating for easier cleaning and better protection against water, oil, and scratches. These layers also provide a higher maximum light transmission and a more consistent transmission curve for sharper images, finer colors, and greater depth.

Double-Threaded    Ultra-Slim Magnalium Rim    German Schott B270 Optical Glass    20-Layer Nano-Coating

The Ethereal 1/8 Diffusion Lens Filter Plus+ diffuses more light to create a stronger haze effect and contrast lift. It works best with bright and close light sources.

Soften extreme sharpness captured by modern digital cameras and replicate the cinematic qualities of film photography.

20-layer nano-coating provides neutral color balance, reduces lens flare, removes ghosting, and protects against scratches.

The filter is double-threaded for stacking filters or using screw-mount lens caps.

The consciously designed ultra-slim rim avoids vignetting.

It is built with German Schott glass for true light transmittance and supreme image quality.

Related Questions and Answers

Q: 1. What lens cap fits the AF-S Nikkor 70-300mm lens?

A: This Nikon 67mm Snap-On Lens Cap will fit a Nikon AF-S 70-300mm f/4.5-5.6G ED IF Lens.

Q: 2. Which lens cap fits AF Nikon 35 -105 mm 1:3.5 - 4.5 D?

A: The Nikon Zoom Wide Angle-Tele 35-105mm f/3.5-4.5 D Auto Focus Lens will work with any lens cap that has a 52mm diameter. bit.ly/47AStgL

Q: 3. For the 67mm model, what is the diameter of the hood when collapsed and uncollapsed, respectively?

A: The 67mm hood is 1/2 inch when collapsed, and 1 and 1/2 inches when open.

Q: 4. I am looking to purchase a 67mm lens but most of my existing filters are 77mm. If I use a 67-77 mm step up ring for filters then the canon lens hood can’t be used. Could I use this 67 mm rubber hood with the step up ring attached to the hood? If so, will there be any impact to the image?

A: You would more likely want to use a hood based on the 77mm size of the filter. That way the step up ring will not have fitting issues with the inside of the hood.

Q: 5. Can it fit to Canon ef 85mm f/1.2 l lens?

A: Yes!! Perfectly!

Q: 6. What is the ID for this cap? Need one for a lens hood with OD 67mm. Wonder if this one fit?

A: Yes, this will fit a lens with a diameter of 67mm.

Q: 7. will this fit a z6ii 24-200 mm lens?

A: Yes, the Nikon 67mm Snap-on lens cap will accommodate the Nikon 24-120 lens.

Q: 8. Is this lens cap hard plastic or soft (e.g., rubber)

A: The cap is hard plastic not rubber. It has a little flexibility but not like rubber.

Q: 9. Will this fit a 35-70mm lens?

A: If you are referring to the Nikon AF Zoom-Nikkor 35-70mm f/2.8D then no, this lens cap will not fit. You would need a 62mm lens cap. I hope that helps but without knowing which 35-70mm lens you are talking about it is difficult to answer with any accuracy.

Q: 10. Does this lens hood work for a Nikon P900?

A: In 18mm you might have problem with the hood vignetting, but the beauty about it, is you can collapse it to remove the vignette. On photographing at a extra wide lens setting, the hood can slide back out of the way in an instant. The best thing about it is that you can screw it onto the outside of your circular polarizer and it makes adjusting more easy by rotating the hood.