Designed to replace a lost cable or expand an existing Nano Shield kit, the Nano Shield XLR-3F to XLR-3M Cable from Rycote is a low-profile XLR female to male cable with a switchable 80 Hz low-cut filter for easily eliminating unwanted low-frequency sounds and rumbling caused by handling wind or handling the field mic kit. This cable sports a thin, flexible cable and active, in-line RF filtering technology for protecting your recordings from obtrusive RF interference.

Low-Profile XLR Cable for Nano Shield    XLR 3-Pin Male to 3-Pin Female    Switchable Low-Cut Filter at 80 Hz    Active In-Line RF Filtering

Related Questions and Answers

Q: 1. Hi Works with MKH 8060 +MZF 8000 filter? Thanks!!! Renzo

A: No, The Rycote 010320 Super-Shield Kit for Shotgun Mics (Small) is for shotgun microphones up to 200mm long and it will not be able to accommodate the Sennheiser MKH 8060 when combined with the Sennheiser MZF 8000. The MKH 8060 is 178mm long and the MZF 8000 is 29mm long, which is 207mm when used together. Instead of the small Rycote Super-Shield, you can use the Rycote 010321 Super-Shield Kit for Shotgun Mics - Medium (B&H # RYSSKM) which accommodates mics that are 200 to 250mm long.

Q: 2. How does this blimp compare with the rycote windshield kit 4? Looks like the only real difference is that the the super-shield does not have a real connbox. Need help picking one, thanks!

A: The Rycote Super-Shield Kits are a great cost effective solutions for heavy wind diffusion, but don't offer the same modular customization available on the windshield kits(4).

Q: 3. Would this be the correct model for the Sennheiser MKH 50?

A: The Super-Shield Kit for Shotgun Mics (Small) from Rycote will accommodate several mics including the MKH-50. Rycote also recommends the Modular Windshield WS 2 Kit for a more robust solution.

Q: 4. I would like to remove the handle from this and mount it to a camera cage with a 3/8-16 or 1/4-20 screw. Would that be feasible by threading it through the hole the handle clamp screws through?

A: No problem grippper will attach to your rig as long as you have a 3/8 thread

Q: 5. I have the Rode NTG3B which is 10 inches. Should I get the medium or large for the Rycote Super-Shield Kit for Shotgun Mics. Which one would fit better?

A: RYSSKM is directly compatible with the Rode NTG3B.

Q: 6. Would the Audio-Technica bp4025 head fit when mounted with the 5 pin XLR cable?

A: The Rycote Super-Shield Kit for Shotgun Mics would not be recommended for use with microphones as wide as the Audio-Technica BP4025.

Q: 7. will the new rode ntg5 fit?

A: Yes, it will fit the NTG-5, and Rycote also make a blimp specifically for that mic: https://www.bhphotovideo.com/c/product/1544185-REG/rycote_010326_super_blimp_windshield_kit_for.html

Q: 8. Will my sennheiser 416 fit ?

A: The correct model of Super-Shield for the MKH416 is the Medium (MFR # 010321): a href= http://www.bhphotovideo.com/c/product/1044548-REG/rycote_010321_super_shield_kit_medium.html target= _blank http://www.bhphotovideo.com/c/product/1044548-REG/rycote_010321_super_shield_kit_medium.html/a

Q: 9. The handle bottom is not threaded and so It's unclear how to mount this on to a boom pole??

A: There is a thread on the bottom of the shock mount that will mate with any standard bom pole threading.

Q: 10. Can you purchase extensions for this blimp?

A: A boompole such as : https://www.bhphotovideo.com/c/product/326895-REG/K_Tek_KE_110CC_KE_110CC_Avalon_Series_Aluminum.html Additionally: https://www.bhphotovideo.com/c/product/1044548-REG/rycote_010321_super_shield_kit_medium.html/accessories