Axis F2135-Re Fisheye Sensor | Axis Communications

Axis F2135-re Fisheye Sensor | Axis Communications

Product Code: eq138998
Availability: In Stock

$777.00 $955.71

Qty

19 reviews Write a review

Description
Reviews (19)

The Axis F2135-RE Fisheye Sensor | Axis Communicationsfrom Axis F2135-RE Fisheye Sensor | Axis Communicationsis designed to be used with modular F91 main units (available separately) for a discreet surveillance solution. This fisheye sensor captures 1080p resolution video at up to 60 fps. The 1.98mm lens delivers a 185° horizontal field of view.

This unit is housed in an IP69K-, NEMA 4X, and IK10-rated enclosure that is suitable for outdoor use in areas at high risk of vandalism.

Designed for Axis F91 Main Units 1920 x 1080 Resolution at 60 fps 1.98mm Fixed Lens 185° Horizontal Field of View IP69K & NEMA 4X Rated for Outdoor Use IK10-Rated Vandal Resistance

Key Specs
Image Sensor	1/2.8"-Type CMOS
Focal Length	1.98mm
Field of View	Horizontal: 185° Vertical: 97°
Power I/O	1x RJ45
Imaging
Lens Mount	M12
Number of Lenses	1
Image Sensor	1/2.8"-Type CMOS
Sensor Resolution	Effective: 2 Megapixel
IR Cut Filter	Yes Mechanical
Day/Night	Yes
Exposure Control
Minimum Illumination	0.1 Lux (Color)
Lens
Focal Length	1.98mm
Field of View	Horizontal: 185° Vertical: 97°
Maximum Aperture	f/2
Video
Automatic Gain Control	No
Interface
Media/Memory Card Slot	No
Other I/O	1x SMA
Sensors & Alarms
Event Trigger	No
Alarm I/O	No
Power
Power I/O	1x RJ45
Power Consumption	1.7
General
Material of Construction	Aluminum
Environmental Resistance	Dust/Water-Resistant (IP67)
Impact Resistance	Impact-Resistant (IK10)
Certifications	EAC, FCC (Part 15 Class A), ICES-003 Class A, IEC 60950-22, KC, NEMA TS2, NEMA Type 4X, RCM
Operating Conditions	-40 to 140°F / -40 to 60°C at 10 to 100% Humidity
Startup Temperature	-40°F / -40°C
Storage Conditions	-40 to 149°F / -40 to 65°C
Mobile App Compatible	No
Dimensions (W x H x D)	1.2 x 1.8" / 29.8 x 46 mm
Weight	0.1 lb / 50 g (Body Only)
Packaging Info
Package Weight	0.235 lb
Box Dimensions (LxWxH)	5.2 x 3.2 x 1.6"

Axis F91 main unit and TU6004-E SMA-FAKRA or TU6005 (plenum cable) SMA-FAKRA cable required for operation (available separately)

Connects to F91 main unit via cables up to 98' for a flexible, neat, and discreet installation

Durable SMA connector

Fixed IR cut filter for day and night switching

PVC free

Related Questions and Answers

Q: 1. will this hold the weight of a panasonic eva1 w/ 16-35mm lens?

A: With the payload of the RS2 being 10lbs and larger carriage to the RSC2, it can be possible to use DJI R Roll Axis Counterweight Set in assistance with balancing the camera without the top handle and side grip.

Q: 2. Is this compatible with the Ronin RS the original?

A: The DJI R Roll Axis Counterweight Set is compatible with the following gimbal models from DJI. Compatibility: DJI RS 3 DJI RS 2 DJI RSC 2

Q: 3. Compatible with canon rebel sl3?

A: The Feiyu SCORP-C 3-Axis Gimbal Stabilizer is not officially compatible with the Canon SL3. The camera will mount and the gimbal can handle it. However, there is no guaranteed electronic communication.

Q: 4. Are the weights a 1/4" thread? I was thinking of buying this for the clamp so I could put a cold shoe mount on it for attaching a shotgun microphone.

A: Yes, the DJI counterweights have a 1/4"-20 thread.

Q: 5. What provides the drive to move the camera?

A: The Proaim Widebase Autopan 2-Axis Slider motion is non-motorized. It uses gears to provide motion as you manually slide the platform. To get the required parallax or panoramic shots, the position is adjusted by guide bar which is connected with fine tuning knobs on each end with scale markings to adjust the position precisely.

Q: 6. Hi, what is included in the box with this 2nd hand kit? Is the following included as per a brand new system or are there pieces missing? Does it come in the original DJI master wheels case? Master Wheels (3-Axis) 1 Monitor Power Cable 1 USB-C Cable 1 Mitchell Mount Adapter 1 Intelligent Battery 2 Battery Charging Hub 1 Allen Wrench 2 Antenna 6 Video Link Power Cable 1 RF Power Cable (5m) 1 Communication Cable (2m) 3 Power Adapter 1 Power Cable 6 User Guide 1 DJI Wireless Receiver 1 DJI Wireless Receiver Antenna 1 DJI Wireless Receiver to D-Bus Cable 1

A: DJI Master Wheels in the factory sealed box: In the Box DJI Master Wheels 3-Axis Monitor Power Cable USB-C Cable Mitchell Mount Adapter 2 x TB50 Batteries Battery Charging Hub 2 x Allen Wrenches 4 x Antennas Video Link Power Cable RF Power Cable (16') 3 x Communication Cables (6.5') Power Adapter Power Cable Wireless Receiver Wireless Receiver Antenna Wireless Receiver to D-Bus Cable Limited 1-Year Warranty

Q: 7. Is this counterweight compatible with the DJI RS4?

A: Yes, the DJI R Roll Axis Counterweight Set is compatible with the DJI RS4/RS4 Pro Gimbal Stabilizers.

Q: 8. Does this come with a case?

A: A case is not included with the Cartoni Third Axis for Lambda 25.

Q: 9. Does this gimbal work with a Canon 70D and a Canon EF 24-70mm lens?

A: The Canon 70D is not listed as compatible with the Feiyu SCORP-C 3-Axis Gimbal Stabilizer. Some of the buttons on the app and gimbal won't work with this camera.

Q: 10. HI, What if a got a Canon5dMark2?

A: The Feiyu Scorp C supports and controls the Canon 5D4 and 5D3. The 5DII would balance and work but it would not be controlled from the gimbal. Please review the compatible camera list. Feiyu SCORP-C tested cameras list https://bit.ly/3OIlBJu

AncientGeek	29/09/2024
[1x RJ45] This wall mount is well made, nice looking and strong. �It was easy to install. �This comes with an IP66 rated RJ45 pigtail, so you will need an RJ45 coupler to connect the likely male network cable to the male connector on the pigtail when installing the camera. 5

Mark	24/09/2024
[1x RJ45] I purchased this stand to fit the AXIS M1124 camera. Easy to install adjust and lock down. Will need to supply your own mounting screws and anchors. 5

Steven	21/09/2024
[1] I bought a few of these to use outdoors to mount a number of cameras. They are sturdy and worked great for all the mounts I used. 5

Stefan	13/09/2024
[1] Exactly what I need to mount the Axis 360 camera to the parapet mount. Dead simple. 5

James	05/09/2024
[Aluminum] Sturdy and as advertised. 5

mac300	02/09/2024
[Yes Mechanical] B&H has always delivered great products, on time and have outstanding tech support. I will definitely keep buying from them! David, Los Angeles 5

Abdulaziz	22/08/2024
[1.98mm] I was having difficulty to mount Axis camera due the building height. Axis T91D62 mount make the installation very easy. The build quality is very good you need to choose compatible mount from axis for your camera. 5

William	19/08/2024
[1.98mm] The job is easier with the right tools and this product certainly made it easy to install a camera around a corner. 5

Jim	15/08/2024
[1x SMA ] I installed two of these on network cables serving outdoor cameras. The devices are six or eight inches long. There is a white plug in each end that is removed prior to use. The metal nuts fit over an RJ45 connector. A split rubber grommet goes around the cable and a plastic insert with a compressible end also fits over the RJ45. The rubber grommet then fits inside the compressible end of the plastic fitting. The RJ45 then plugs into one end of the surge suppressor, the plastic fitting with the grommet slides into the end of the device to cover the RJ45 and the metal nut then screws on. As you tighten the nut, it compresses the rubber grommet until it is tight around the network cable. I believe this is meant to be water tight, but I mounted mine under cover, so I don’t have firsthand experience with those well that works. The ground strap gets connected to some sort of ground, but there is no explanation of what ground should be used. I assume this should be an earth ground, so I drove a rod into the ground and connected a ground wire from the rod to the strap. Coincidentally, we had a thunderstorm with some very close lightning a day or two after I installed this. The camera reset after one Very close strike. It came back on after a few minutes and appears to work well. However, I was on site a few days later and my Companion Recorder had a flashing red light and was beeping. I have not yet looked at it to see if the two events are related. The network cable runs from the surge suppressor to a 60W PoE injector and then to the Companion Recorder. The PoE injector still works fine and the Companion Recorder is powered through a UPS which also has surge suppression. So the two events could be unrelated. 5