The Rycote Shotgun Mic Foam & Windjammer Combofrom Rycote Shotgun Mic Foam & Windjammer Combois a slip-on wind solution for Sennheiser MKH 60 and Sony ECM 672 shotgun microphones. The foam features a 7" inner depth and a large hole diameter opening. It features an open-cell acoustic foam windscreen that offers up to 10 dB wind-noise attenuation and a synthetic-fur windjammer that offers up to 12 dB of wind-noise attenuation.

The foam windscreen slips over the microphone head. The windjammer slips over the foam. The combo is designed to keep high-frequency loss to a minimum while providing resistance against the effects of moisture and UV light. Use it to capture audio recordings in outdoor conditions such as on boats or beaches, in stormy weather, and more.

Open-Cell Foam with 10 dB Attenuation    Windjammer with 12 dB Attenuation    Foam and Windjammer Slip on Easily    Foam Resists Moisture and UV Light

Related Questions and Answers

Q: 1. If you mount this item like pictured, what is the point of the velcro? It has no way of latching. It seems like it is supposed to cinch around the mic part itself, but then there's way to much room in the front. Also, am I supposed to leave the foam on?

A: The wind protection works best with the foam in place. When I tighten the velcro around the barrel and then pulls it back into the notch between the barrel and the body, I get a very nice and snug fit.

Q: 2. Which size is the best for the Sennheiser mkh50? Thanks.

A: For the Sennheiser MKH 50 we would recommend a Rycote Baseball Felt-Covered Windscreen (Black, 24/25mm, Single, B&H # RY039702) or a Rycote Classic Softie Wind-Screen (1.9" Long, 0.9" Diameter Hole, Grey, B&H # RYS5L).

Q: 3. Will this work with a Sennheiser ME 64?

A: Hi John. Yes, it will fit the ME 64 very nicely.

Q: 4. Will this fit a Sennheiser 416 shotgun mike?

A: Yes, the Rycote 104428 Shotgun Mic Foam for ME66 and K6 Microphone is compatible for use with the Sennheiser MKH 416 Shotgun Microphone. If you want the same windscreen that is included with the MKH 416, it is the Sennheiser MZW-415 Foam Windscreen (B&H # SEMZW415).

Q: 5. Hello, would this fit a Lewitt LCT 440 Pure microphone?

A: The Rycote Windjammer for 45/100 Foam for Large Diaphragm Condenser may fit on the Lewitt LCT 440 Pure, but we are not able to test it on the mic to be able to confirm this since the Windjammer is only available by special order (we don't have it in stock). The Windjammer is designed to fit over the Rycote 45/100 Large Diaphragm Mic Foam (B&H # RYLDM4510001).

Q: 6. I can see on Rycote's own website that this is compatible with the Zoom SGH-6 shotgun mic. Does it also fit the newer Zoom SSH-6 stereo shotgun mic?

A: This Rycote Windjammer Combo will fit both the Zoom SGH-6 and SSH-6 shotgun microphones.

Q: 7. Has anyone tried this on the deity v3 pro?

A: The diameter of the two mics is the same, and the Deity is less than an inch longer that the Rode, so yes, it should be a good fit.

Q: 8. Can this windjammer be used with a Sennheiser ME-4 lav mic?

A: I use it fine with the ME-2 lav mic. I have never used it with the ME-4 which is a little fatter on top but this windjammer stretches and looks like it should fit the ME-4. The windjammer only cost $20 so you might order it and try it out and if it doesnt work with your mic then you can return it.

Q: 9. Will this fit the Videomic Pro+ ?

A: No, this Rycote Mini Windjammer is intended for use with a different mic. For the VideoMic Pro+, you can use the Rycote Mini Windjammer for Rode VMP+ (B&H # RY055470) or Rode DeadCat VMPR+ Artificial Fur Windshield for VideoMic Pro Plus Microphone (B&H # RODEADCATVPP).

Q: 10. Hello, would this fit on a Neumann 89i respectively over a Neumann WS89?

A: This windscreen is designed to fit over the Rycote 45/100, which is a foam shield for 2.17" diameter mics. Since the Neumann U89i is 1.8" in diameter, this windscreen will be too large for the WS89.