The MuxLab HDMI RS232 Extender Kitfrom MuxLab HDMI RS232 Extender Kitenables the long-distance transmission of HDMI signals over a single Cat5e/6 or higher cable. It supports all digital audio including 7.1-channel surround, Dolby TrueHD, and DTS-HD. With a range of up to 230' for resolutions up to 1080p, use this for digital signage, projection systems, A/V systems, or any other application where the source is far from the display. There is an included IR emitter and sensor for controlling the source, such as a DVR or cable box, from the display location.

Transmits HDMI over Cat5e/6 Cable    Compatible with Multi-Channel Audio    Up to 230' Range at 1080p Resolution    Supports Two-Directional IR Remote

• For devices such as DVD players, HD televisions, projectors, monitors, and servers
• Commercial applications including digital signage, surveillance system public monitor, A/V systems
• Education/Business applications such as A/V systems, projector systems, collaborative PC systems

• Transmits HDMI 1.3a, HDBaseT signals, and 7.1-ch, Dolby TrueHD, DTS-HD digital audio
• Transmit up to 1080p HDMI signal, with digital audio, over a Cat5e/6 or higher cable
• Up to 230' maximum for 1080p
• VGA connector for remote computer monitor

• Supports bi-directional IR remote source control
• Includes IR emitter and sensor

Related Questions and Answers

Q: 1. Is there a delay time from input to output?

A: According to Muxlab this product has a 1 to 2 Frame Latency. It is a very low latency unit.

Q: 2. Will this product create a new HDMI source?

A: This product takes in a single HDMI signal and turns it in to two HDMI signals.

Q: 3. Where do you get extra receivers without having to buy extra transmitters? Is there a link for that?

A: Unfortunately Muxlab only sells the MuxLab HDMI Wireless Extender Kit. They do not offer a receiver only option. At this time you would have to purchase the kit to add more wireless receivers.

Q: 4. Has anybody used this device to feed HDMI over 200ft Cat5/6 to Black Magic switcher input?

A: We have tried to run 4 tv's 2 at 50ft and 2 at 100 - 200ft strictly HDMI off of this thing and it usually has an issue where 1 TV will turn off or loose signal. 4 tv's under 50ft usually works fine. Don't know about a single run though. if your converting over to cat 5 it would fall more on the hdmi to cat 5 converter I believe. This does not input or output cat 5/6.

Q: 5. Does this product mirror or extend the monitors?

A: This product will mirror the input it is given. It accepts a single HDMI and it will split that same image out to 4 locations.

Q: 6. ideally, i have 8 monitors that will form 1 large display. can this splitter project 1 small screen display source to the 8 monitors as 1 big screen?

A: Sorry, no, it cannot work that way. All this would do is give you 8 separate videos at the same time. For an affordable video wall solution you could use 4 HD TV's and make one image with this controller. Gefen HD Video Wall Controller B&H # GEHDVWC144 (-----Copy and Paste this number to the B&H website search box and click Go. )

Q: 7. Wondering if my application would work. Source: laptop; output to: projector and BMD ATEM Television Studio HD. Does this have a chance of working? Thanks.

A: Yes, it should work.

Q: 8. Does it come with a power supply?

A: Yes, this is included in the box.

Q: 9. Can I use this to control a PTZ camera?

A: Yes, if your camera supports RS-232-C protocol for control.

Q: 10. Does it ditributes sound too ?

A: Yes the MuxLab HDMI 1 x 2 Splitter will Ditributes sound too.