Keep your hardware protected from spikes and outages with the CyberPower PRL1500RT2UC Smart App Sinewave UPSfrom CyberPower, a rack/tower convertible UPS with line-interactive topology, surge protection, battery backup, and sine wave output to eliminate power gaps that can be detected by sensitive equipment and cause unexpected shutdowns. This uninterruptible power supply (UPS) sports eight NEMA 5-15R outlets, all of which provide surge protection and battery backup, while four also serve as critical load outlets. Providing an output of 1500VA/1500W at 50/60 Hz ±3 Hz, the PRL1500RT2UC can be used with 100-125V inputs. Line-interactive topology, automatic voltage regulation, and power-factor correction all ensure your connected equipment is appropriately powered, while a 2430-Joule surge suppression rating and a 15A circuit breaker prevent damage during a spike.

This UPS offers runtimes measuring 8.7 minutes at full load, or 18.7 minutes at half load, while the backup battery has a 2-hour recharge time to 90% when the battery is fully drained. The sine wave power output results in low total harmonic distortion and electrical noise for improved line clarity. In addition to an RJ45 port for cloud monitoring, the rear panel also incorporates a USB-B, serial, and EPO ports for communication purposes. The multifunction LCD screen rotates 90° and can be used to monitor battery and power conditions and alerts to potential problems. Use PowerPanel Personal software to control your UPS via a convenient dashboard interface. The PRL1500RT2UC utilizes a 10' power cable with a NEMA 5-15P plug for flexible deployment.

Output: 1500VA / 1500W    Input: 100-125 VAC (Range: 70-155 VAC)    8 x NEMA 5-15R Outlets (Total)    8 x Battery/Surge & 4 x Critical Outlets    RJ45 | USB-B | Serial | EPO    Recharge Time: 2 Hours to 90%    Sine Waveform, Line-Interactive Topology    Automatic Voltage Regulation (AVR)    2430 Joules of Surge Suppression    Multifunction LCD Panel

• Corporate Servers
• Department Servers
• Network Devices
• Storage Devices
• Telecom Installations
• VoIP Installations

Supplies power long enough for equipment to properly shut down when utility power fails. Helps prevent loss of data and minimizes the component stress caused by a hard shutdown.

Exists when a line-interactive UPS has an autotransformer that regulates low voltages (e.g., brownouts) and over voltages (e.g., spikes) without having to switch to battery.

AVR increases or decreases the AC power and maintains a safe voltage level without switching to battery mode and conserving battery life.

The UPS generates energy that is identical to, or cleaner than the utility company's power grid. Benefits include low total harmonic distortion, minimal electrical noise, and optimal line clarity.

Lithium is a maintenance free premium battery technology with a longer lifespan and higher efficiency.

Battery Equalization is an advanced charging process that maintains the voltages of the batteries at the same level to increase battery life.

Allows UPS batteries to return to full capacity more rapidly by using a built-in charger inside of each UPS or EBM.

Tilts to provide a better viewing angle when the Smart App Sinewave is mounted low. Rotates 90° when placed in a tower format for horizontal viewing. Provides information on 47 different settings that include UPS status, UPS setup and control management, and testing options.

Makes battery replacement fast and simple. The faceplate features side latches for easy removal, and captive screws can be loosened by hand to open the battery cover.

Diverts excess voltage away from sensitive electronic equipment during an AC power surge or power spike to prevent damage.

A patented design that allows utility power to bypass the UPS transformer, when AC power is stable, which reduces energy consumption, noise, and heat buildup.

Allows for horizontal rack or vertical tower installation.

Provides IT professionals with tools for monitoring and managing the UPS and backup power. This software offers remote management functionality. Free software download available. See the Resources tab.

This model is an ENERGY STAR certified Uninterruptible Power Supply (UPS) system. ENERGY STAR is the trusted, government-backed symbol for energy-efficient products and practices that help save money and protect the environment.

CyberPower will repair or replace up to $400,000 of properly connected equipment if it is damaged by a power surge.

Related Questions and Answers

Q: 1. does it include rack mounting hardware?

A: No, a rack mounting hardware would not be included with the CyberPower OR700LCDRM1U Smart App LCD UPS.

Q: 2. Can i add externas bateras ..?

A: Hi John - the unit does not have the ability to add external batteries. If you need extra batteries you would want to look at our PR2200LCDRTXL2U

Q: 3. Can we mount on wall

A: It won't mount to a wall out-of-the-box. But I mounted it on the wall using a vertical 2U rack mount. Looks and works great.

Q: 4. Is this product compatible with Windows 10?

A: Hello Ray, Yes the accompanying software is compatible with Windows 10. Thank you for submitting your question!

Q: 5. I wonder if this product has an ability to send an email to users in case of power stoppage?

A: Yes, this is a special feature of this device. You're able to send emails in case of a power shortage.

Q: 6. I'm planning to use this with a Synology 920+ server. Is there a way for this CyberPower battery to communicate with the Synology to power down due to a power outage?

A: Unfortunately not automatically.

Q: 7. Does the unit come with the comm. cables (usb, serial, epo)? If so, what type jacks are on both ends of USB cable furnished?

A: The CyberPower PR1500LCD Smart App Sinewave UPS ships with a DB-9 serial cable and a USB Type-B to Type-A cable.

Q: 8. does this unit come with rack rails? can't seem to find that info anywhere. thanks!

A: Yes, the CyberPower PR1500RTXL2U Smart App Sinewave UPS BH #CYPR15RTXL2U includes rack rails.

Q: 9. Will this handle a devise that has a large amp draw?

A: This CyberPower Smart App Sinewave UPS will support up to a 20a draw. Note that only the bottom two outlets support that current. The others are 15a.

Q: 10. Does this product come with CyberPower RMCARD202 Remote Management Card - SNMP/HTTP?

A: No it does not.