Bringing the essence of computer-based music production software to the super-compact MixPre-6 II, the Sound Devices Musician Plug-In offers musicians and songwriters an easy-to-use, portable tool for creating high-quality, multi-layered songs anywhere and anytime inspiration grabs them.

The Musician plug-in enables recording, playback, mixing, monitoring, layering, and overdubbing of up to 12 tracks, with 6 simultaneous tracks on the MixPre-6 II. Once your song is finished, you can mix and render (export) it for sharing with others. The built-in metronome helps you keep your performance in time, while the reverb and vocal air effects add character to your recording and can contribute in inspiring a great performance.

Music Production on MixPre-6 II    Up to 12 Tracks, Record 6 Inputs at Once    Track Laying, Overdubbing    Punch In/Out, Track Bouncing    Reverb and Vocal Air Effects    Mixing, Rendering, Import    Metronome    24-Bit/96 kHz AD/DA Conversion

• Track Laying/Overdubbing—Record up to 12 tracks total: 6 at once on the MixPre-6 II.
• Track Bouncing—Mix multiple tracks into one or two, freeing up more tracks for further overdubbing.
• Punch In/Out—Automatically or manually drop in and out of record on armed tracks while playing back existing unarmed tracks.
• Cue Markers—Navigate your song easily using cue markers.
• Effects—Add character by applying Reverb or Vocal Air. The Vocal Air effect is a combination of EQ and compression that results in an airy sheen and intimacy to vocals.
• Metronome—Use the built-in, configurable metronome to keep your performance in time.
• Input to Track Routing—Route any input to any track, reducing the need to re-plug inputs.
• Mixing—During recording or playback, create a mix using fader knobs, pans, solos, mutes, and effects.
• Rendering—Render (export) your song for sharing with others.
• Import—Load a multichannel WAV file from a DAW to use as the foundation of a new project or as a backing track for live performance.
• Up to 24-bit/96 kHz AD/DA conversion.
• NoiseAssist, MixAssist, and Ambisonics plug-ins are unavailable when the Musician plug-in is in use.

Related Questions and Answers

Q: 1. Has anyone squeezed a mixpre-10 in this yet? It looks like it will fit if the XLR’s are low profile. I know the canned answer - but has anyone actually tried or have both so they could give it a shot? I’ll buy you a beer, I swear.

A: The MixPre-10 II is a bit larger than the MixPre 3 and 6 models that this bag is listed as supporting. We do not believe it will fit the MixPre-10 II and is not recommended.

Q: 2. If I got this for a MixPre 3 and a Hirose 4-pin to D-Tap/P-Tap cable, would I be able to power it off v-lock batteries with a D-Tap/P-Tap out?Also, If it was to be configured under a camera with v-lock power could it split and share power to both devices or is there load limits, etc?Trying to run it off a RED Raven, but also have the ability to power it separately off v-lock batteries.

A: Question #1) Yes, that should work fine. The MX-Powersled has a large input voltage range of 9 to 24 volts DC, and can accept power from any source that can be wired to the four pin Hirose DC standard, and supply the 7 to 9 watts the Mixpre 3/6 requires. I have used mine with an NP-1 cup to Hirose cable, AC adapter, as well as a car battery alligator clip cable with no problems. Question #2) There should be no issues with sharing a battery between both devices (with a commensurate decrease in overall run time). As indicated above, the Mixpre 3/6 needs about 7-9 watts to run with phantoms on all inputs, less without phantom.The Mixpre-3/6 is a fantastic piece of equipment that is extremely flexible and great sounding. Good Luck!

Q: 3. will this work with Mix Pre 3 II which is rated at 5V?

A: Yes the Cable Techniques MX-POWERSLED will work fine with the MixPre 3 or 6. The recorder regulates the voltage required not the battery sled.

Q: 4. If you use rechargeable batteries in this, can they be charged overnight by connecting the MixPre3 to a USB port?

A: No you can power the recorder via USB while recording or via the rechargeable AA batteries, however they need to be charged with their own charger outside the recorder.

Q: 5. does this work with the mixpre 6 ii? If so, is there a particular Sony L-style battery you would suggest to run the mixpre-6 ii?

A: Yes, the Sound Devices MX-LM1 L-Mount Battery Sled for MixPre, MixPre-M & MixPre-II Mixer/Recorders is compatible with the MixPre-6 II. Any Sony L-series battery will be compatible.

Q: 6. Can someone recommend a Hirose MALE 4 pin to D-Tap cable for this? I want to power my MixPre6 with a V-mount battery.

A: The Remote Audio Anton Bauer PowerTap to 4-Pin Male Hirose DC Power Cable (BH #RECAPTAPHIR) is a great cable option to connect a D-Tap power source to the Cable Techniques MX-POWERSLED for Sound Devices MixPre-3 And MixPre-6: https://bhpho.to/3b8c7JE

Q: 7. What is the difference between this one and the cheaper $65 option?

A: Hi Jared. The MX-LMOUNT holds 2 NPF batteries, and the MX-LM1 only holds 1 NPF. Battery orientation is parallel to the chassis for the MX-LM1, but perpendicular for the MX-LMOUNT.

Q: 8. is it compatible with mixpre 10t ?

A: Yes, it is. Mine arrives today, and I will verify, but the documentation explicitly states that is is compatible.

Q: 9. How long does it last?

A: Thank you for your question. It will depend on size of battery and the amount of channels you are using with phantom power.

Q: 10. Is this battery sled made of metal? From the reviews of the earlier, double L battery mount from Sound Devices, I’d be hesitant to shell out almost three times more money for this one if it is still made of plastic.

A: Thank you for asking. This device is made of plastic, but its form factor is considerably different than that of the MX-LMOUNT.