You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Pioneer Pro Audio Cm-s56t 6" Surface Mount Loudspeaker

Pioneer Pro Audio Cm-s56t 6" Surface Mount Loudspeaker
  • Product Code: eq140432
  • Availability: In Stock

$1,221.00 $1,684.98

Produce premium-quality audio reproduction with the Pioneer Pro Audio CM-S56T, a pair of black, passive, 2-way, commercial/residential loudspeakers that draw on Pioneer's club loudspeaker heritage. Each loudspeaker has a power handling of 60W RMS (120W peak) and features a 6" woofer and a 1" silk dome tweeter which combine for a 80 Hz to 20 kHz frequency range and a max SPL of 113 dB.

The CM-S56T is perfect for discreet installation in a variety of spaces where reliability is crucial. Rated IP54, the speakers can be used outdoors with some limitations. The rear panel features a 4-pin Euroblock connector and a connection panel to safeguard the internal components. Each speaker ships with a mounting bracket pre-installed and a set of mounting hardware.

For Residential & Commercial Installs    For Indoor and Limited Outdoor Use    6" Woofer, 1" Silk Dome Tweeter, 8 Ohm    60W RMS, 120W Program Power Handling    80 Hz to 20 kHz (-10 dB)    113 Peak SPL    110x110° Dispersion    70/100V Transformer Taps    4-Pin Euroblock Connector    Includes Mounting Bracket and Hardware

Key Specs
Active/PassivePassive
Number of Included Speakers2
Speaker Configuration2-Way
Power Handling60 W RMS
120 W Program
Constant Voltage / Transformer Taps70 V:
60 / 30 / 15 / 7.5 W
100 V:
60 / 30 / 15 W
Impedance8 Ohms
HF Driver1x 1" / 25.4 mm Silk Dome Tweeter
LF Driver6" / 152.4 mm Woofer
Frequency Range80 Hz to 20 kHz -10 dB
ColorBlack
Speaker
Active/PassivePassive
Number of Included Speakers2
Speaker Configuration2-Way
Power Handling60 W RMS
120 W Program
Constant Voltage / Transformer Taps70 V:
60 / 30 / 15 / 7.5 W
100 V:
60 / 30 / 15 W
Impedance8 Ohms
Enclosure TypeBass-Reflex
Drivers
HF Driver1x 1" / 25.4 mm Silk Dome Tweeter
LF Driver6" / 152.4 mm Woofer
Performance
Frequency Range80 Hz to 20 kHz -10 dB
Maximum SPL113 dB (Peak)
Sensitivity88 dB
Coverage Angle110° H x 110° V
Connectivity
Inputs/Outputs1x Block 4-Pin Speaker Input/Thru
Physical
Environmental ResistanceNo
ColorBlack
Mounting2x M6 Bracket Point (Side)
Construction MaterialAluminum Grille, Polypropylene
Dimensions13.08 x 8.43 x 7.22" / 33.22 x 21.41 x 18.34 cm
Weight11.2 lb / 5.1 kg

Soft dome tweeter

  • The newly developed 1" soft dome tweeter is the perfect component to deliver short-throw high-definition high frequencies. Deploy fewer boxes with the conical dispersion available throughout the range. The CM-S54T disperses at 120×120°.

Newly developed Vortex Bass Accelerator

  • Discover warm bass with the newly developed Vortex Bass Accelerator. The bass-reflex port has been constructed with ribs to ensure that air flows without distortion, to maximize low frequencies and eliminate any unwanted vibrations.

Flexible 8 ohms impedance

  • Built-in transformer taps provide flexible impedance options. Whether you’re using 70/100v line systems or if the situation calls for premium audio quality, you’ll find the CM-S Series versatile and easy to use.

Dust and water-resistant

  • The CM-S54T is IP54-rated. The tough plastic enclosure and included protective terminal cover enable you to cover every inch of space with sound–even in some outdoor areas.
  • The CM-S54T speakers are suitable for use in outdoor settings, however they should not be used in areas where they may be subjected to excessive amounts of rain or moisture.

U bracket

  • Rigid notches inside the U bracket make it easy to adjust the direction of the sound. Fix the directivity by hand and, for extra security, fix it with an Allen key or screwdriver. If you need an alternative deployment, you can use the 60mm pitched holes on the rear of the speakers to fit them into challenging spaces.

Original curved enclosure design

  • The CM-S speakers fit neatly into the design of any room thanks to their unique shape. Because they’re neither square nor round, they always look at home–whether they’re mounted on a flat or curved surface.

Related Questions and Answers

Q: 1. Cakewalk?

A: We cannot confirm whether or not the Steven Slate Audio RAVEN MTi2 MAX DAW Control Surface is compatible for use with Cakewalk. The supported DAWs listed on the manufacturer's website are Pro Tools 19-2023 (macOS and Windows), Logic Pro X (macOS), Ableton Live 9 - 11 (macOS and Windows), Cubase Pro 10 - 13 (macOS & Windows), Nuendo 10 - 13 (macOS & Windows), Studio One v4, v5, and v6 (macOS & Windows), and Digital Performer 8 - 11 (macOS).

Q: 2. Would these work on a 500 watt halogen light? Im worried about the heat of the ligt melting it.

A: The halogen lights get hot and will melt the gels. The easiest solution to your problem would be to mount the gels at a safe distance from the lights thereby retaining safety and airflow around the lights themselves. We use a separate stand and a jury-rigged system to hold the gels in place.

Q: 3. Will this run the full versions of Adobe Lightroom Classic and Photoshop?

A: Microsoft 13" Multi-Touch Surface Pro 8 can run the applications, however it is limited without having a dedicated Graphics Card on board.

Q: 4. So these are called "pro" but only come with Windows Home?

A: The Microsoft 13" Multi-Touch Surface Pro 8 is Pro but comes with Windows 11 Home.

Q: 5. Can this device be used to detect high frequency noise suppressing generators in office buildings?

A: No. The Galaxy Audio CM-170 Check Mate Series Type II SPL Meter is used to measure sound pressure levels (SPL) in decibels. It would only be able to measure the SPL of any equipment.

Q: 6. Can the display's refresh rate be locked to 120Hz? Also, is the least expensive variant capable of running Blender and Adobe Photoshop?

A: Frame rate will be determined by the apps and load.

Q: 7. Is this (and other ACB-xx lensplates) compatible with the Actus-G ?

A: The Cambo ACB-CM is not compatible with the Cambo Actus G.

Q: 8. can surface pro 8 use the old surface pro 7 keypad?

A: No, the Microsoft 13" Multi-Touch Surface Pro 8 is not compatible with the Surface Pro 8. I recommend the Microsoft Surface Pro Signature (BH #MI8X600001).

Q: 9. Does it come with standard keyboard cover?

A: No, the Microsoft 13" Multi-Touch Surface Pro 8 (Platinum) comes only with the power supply.

Q: 10. Does this have cellular capabilities so I can connect to Verizon network?

A: No, this version of the Surface Pro 8 does not feature a cellular network connection.

07/09/2024

[2-Way] I bought this to measure very quick, loud bursts of noise. This meter reads fast enough to be fairly consistent in reading the noise. It's well built and does a good job. Also, it's very easy to use.

5
25/08/2024

[8 Ohms] It does exactly what it's supposed to do. Easy to use and works very well. I used it to balance the speakers' volumes and phases in a home theater.

5
18/08/2024

[8 Ohms] Mostly home theater and road

5
04/08/2024

[8 Ohms] Seemingly Excellent quality, accurate, and easy to use meter. Appears to be a long-lasting product. Only time will tell.

5
08/07/2024

[2] We are very happy with our AD-S6Ts. They sound great and have good coverage while also not looking like an eyesore. Highly recommend!

5
22/06/2024

[2-Way] This is not a very exciting product, but it works perfectly with my OC White mic arm. It is sturdy and should outlast me. I used 10-24 screws (with washers and nuts) and drilled holes to mount it to my desk. The screws are not included, but cost pennies at the local hardware store.

5
13/06/2024

[2] First one I've ever purchased. It does what I want it to do. I use it in my recording studio.

5
27/05/2024

[8 Ohms] This works perfectly with the rock-solid OC White scissor arm. Cast iron, looks like it will last longer than I will. Be sure to wrench this into your desk or mounting surface very tightly, and you'll be good to go.

5
24/05/2024

[Bass-Reflex] I didnt realize how much I needed this mount until it arrived. I have no doubt that it will outlast the rest of my studio!

5
22/05/2024

[88 dB] If you know Tannoy - you know how good these sound. Powering them with a Sonos AMP and they look and work great.

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Qsc Ad-s4t 2-way Surface-mount Loudspeaker Pair

$1,320.00 $1,742.40

Qsc Ad-s8t 8" Surface-mount Loudspeaker

$2,040.00 $2,917.20

Qsc Ad-s6t 6.5" Surface-mount Loudspeaker Pair

$2,688.00 $4,112.64

Qsc Ad-s8t 8" 200w Surface-mount Loudspeaker

$2,040.00 $3,264.00

Qsc Ad-s12 12" Surface-mount Loudspeaker

$3,300.00 $4,125.00

Qsc Ad-s10t 10" Surface-mount Loudspeaker

$2,751.00 $3,411.24

Qsc Ad-s10t 10" 2-way Surface-mount Loudspeaker

$2,751.00 $3,548.79

Qsc Ad-s12 12" 2-way Surface-mount Loudspeaker

$3,300.00 $5,214.00

Qsc Ad-s4t 4.5" Surface-mount Loudspeaker Pair

$1,320.00 $1,900.80

Products You May Like

Tecnec Lemo To Male Xlr Power Cable 72"

$289.47 $451.57

Teradek Ctrl.3 Wireless Lens Controller Imperial

$8,997.00 $13,585.47

Zeiss Cp.3 100mm T2.1 Lens Nikon F Mount

$15,870.00 $21,741.90

Indipro Tools Micro-series V-mount Battery 270wh

$1,469.97 $1,852.16

Arri Ultra 16 Prime Lenses Case By Jason Cases

$1,497.00 $2,125.74

Godox Knowled Octa Softbox For P600r 5'

$447.00 $715.20