Bluetooth Audio To Dante Interface

Bluetooth Audio To Dante Interface - Muxlab (white)

Product Code: eq140796
Availability: In Stock

$1,943.85 $2,876.90

Qty

9 reviews Write a review

Description
Reviews (9)

Simplify your your audio setup with the white MuxLab Bluetooth Audio to Dante Interface, a two-way audio transmission panel for Bluetooth and Dante. Connect your smartphone, tablet (iOS and Android), and other mobile devices via Bluetooth for transmission through a Dante network.

Power, control, and audio data are transmitted by only one network cable for simple ease of operation. This single-cable solution mitigates ground loops and other audio issues. The Bluetooth Audio to Dante interface is designed for use with standard US wall gang boxes with Decora faceplates.

Simple and Intuitive Bluetooth Pairing Bluetooth 5.0 for Stability & Long Range Works with Most Smartphones and Tablets Single Cable Power & Audio Transmission Easily Installs in Standard US Wall Box Connection Status Through LED Indicator Supports PoE

Parameters
Input Interface	Bluetooth 5.0, Stereo
Bluetooth Range	49.2 to 75.5' / 15 to 23 m
Dante Interface	RJ45 Interface, Stereo Input / Output
Frequency Response	20 Hz to 20 kHz
Sampling Rate	48 kHz, 24-Bit
Noise Floor	-90 dB
THD	<0.005%
Form Factor	Single Gang US
Operating Temperature	32 to 104°F / 0 to 40°C
Operating Humidity	5 to 95%
Power Consumption	2 W
Dimensions (L x W x H)	4.9 x 3.1 x 1.4" / 12.4 x 7.9 x 3.5 cm
Weight	5.5 oz / 156 g
Packaging Info
Package Weight	0.92 lb
Box Dimensions (LxWxH)	6.5 x 5.8 x 3.2"

Simple and intuitive Bluetooth pairing
Bluetooth 5.0 for longer range and more stable connections
Compatible with most Apple smartphones, iPads, and Android tablets
Power supply and audio transmission integrated in one cable
Designed to be compatible with standard single gang US wall boxes with Decora faceplates
Shows the connection status through LED indicator light
Supports PoE (IEEE802.3af)
Supports AES67 RTP audio transport

Related Questions and Answers

Q: 1. Can I use a micophone to the Aux (via 3.5 mm jack or usb to 3.5 mm jack adapter) to transmit to a bluetooth speaker?

A: The Logitech Bluetooth Audio Adapter BH #LOBTAA will not allow you to plug a microphone to the AUX. This is only to connect to powered speakers.

Q: 2. Would this work with Yeti USB Microphones?

A: The Audinate Dante AVIO 2x2 USB Type-A I/O Adapter is used to connect a computer to a Dante network. The Yeti USB microphone needs to be connected directly to a computer's USB port. You cannot connect the mic directly to the Dante adapter, but you can connect the mic to your computer and then connect your computer to the adapter and connect the setup to a Dante network.

Q: 3. I'm looking for a way to input a voice message, which has been processed in iZotope software, onto a standard answering machine, with the goal of having a clean outgoing message. Is the JK Audio AutoHybrid interface the way to achieve this? If not, what device would do the job? Thanks....

A: This should work for your proposed application.

Q: 4. Can this be used as the audio input and output device with conferencing applications (Zoom, Teams, etc)?

A: Yes, the Audinate Dante AVIO 2x2 USB Type-A I/O Adapter for Dante Audio Network is capable of integrating Dante devices with conferencing applications such as Zoom and can serve as an input and output device in this manner.

Q: 5. Does this unit work with digital landlines? I bought a Rolls P19 Patch 11 and it does not work with my Shaw Cable landline.

A: I was going to answer this but B and H will not allow me to provide the address and phone number of the manufacturer so you're on your own, though luck.

Q: 6. does this item work with a 70 volt amplifier?

A: The AutoHybrid is a passive telephone audio interface, allowing a telephone signal to be brought into a mixing board as an audio signal, and then separating the caller and sender of the call. Typical use is radio call-in shows, podcasts and conferences.

Q: 7. I would like to use this device to make engineering test measurements of signals on the POTS phone line (noise, distortion, frequency response, etc.). Are the audio signal levels on the XLR connectors the same as one would measure on the POTS line (w/o the DC of course)? And can both directions of two-way conversation be measured with this device?

A: This information is not documented. Please contact JK Audio directly to speak to one of their support engineers:JK AudioTel: 800-552-8346Email: info@jkaudio.comWebsite: http://www.jkaudio.com/

Q: 8. How do you adjust the audio on this equipment? We are running through a sound board.

A: Page 02 of the following data sheet shows how you would interface the AutoHybrid between your land line phone and your audio console. https://www.jkaudio.com/downloads/datasheets/JK-Audio-AutoHybrid-Datasheet.pdf

Q: 9. Can I use this alongside a wired ethernet connection to a WAN?

A: there should be no interference running this alomg side wired ethernet or even power cables.

Q: 10. Will this adapter work with the new M1 apple silicon MacBook pros? I'm having trouble with the virtual sound card not being supported until early 2022

A: As of the time of this writing, Audinate makes no specific confirmation of Apple M1 compatibility with the Audinate Dante AVIO 2x2 USB Type-C I/O Adapter for Dante Audio Network. However, this device requires no software installation and may function as an appropriate interface depending on the software program it is being paired with.

anyonymous	06/09/2024
[5 to 95%] I bought four of these baluns for two s/pdif runs that I need for live streaming from the church's studio to broadcast point and I currently have only used two the baluns so far and I have to say I'm impressed. I running the line over 175 foot span and the audio quality is flawless. Absolutely recommend these baluns for doing any type of s/pdif run over cat5e cable. 5

Tyler	05/09/2024
[5.5 oz / 156 g] As I am upgrading my production machines to apple silicon, I was in need of a new high channel count Dante interface for my virtual soundcheck machine. This installed and configured with zero issues, recording 128 channels at 96k, also using prodcom for speech to text for talkback mics on an M1 Mac mini. Flawless. Highly recommend. The fact that Dante Controller is also able to utilize this as a NIC is a huge plus over the now obsolete Dante accelerator card. 5

Robbie	22/08/2024
[0.92 lb] I'm using this to get audio out of an Amazon Echo into my AoIP network. Works great! 5

Hobsonmedia	27/07/2024
[0.92 lb] We have a radio studio and often record guest interviews via phone. We knew there had to be a way to eliminate the cost of LAN lines, but all our searches came up emtpy. Then, we found the DAPTOR 3 - and it was perfect. Simple. Reliable. Great sound. We now record in studio via cell phone, save hundreds on the cost of LAN lines! 5

William	12/07/2024
[-90 dB] This was a perfect fit for my situation. My client only had on four wire shielded cable and there was no way to run a Cat6 or Digital coax to that space. I connected a MuxLab Digital Audio Balun and the problem was resolved. Works Great! 5

Felipe	05/06/2024
[20 Hz to 20 kHz] My workflow has changed a lot since I started using Antelope's interface and plugin. The sound is just amazing, and very easy to use. Definitely best acquisition for my studio. 5

Pazhaninathan	12/05/2024
[0.92 lb] This product is excellent. I can connect my cell with mixture through Bluetooth and doing live. Great product. Thank you. 5

prism security group inc	03/04/2024
[2 W] Very useful in linking audio sources located in one location with sounds system rack located in audio closet 5

Eric	01/04/2024
[0.92 lb] I couldnât update my previous review so this supersedes it. B&H refunded our purchase and we used the Audinate AVIO Dante adaptors, which worked great! 5