Bluetooth Analog Audio To Dante Interface

Bluetooth Analog Audio To Dante Interface - Muxlab

Product Code: eq140797
Availability: In Stock

$2,393.85 $3,566.84

Qty

19 reviews Write a review

Description
Reviews (19)

Simplify your your audio setup with the black MuxLab Bluetooth and Analog Audio to Dante Interface, a two-way audio transmission panel for Bluetooth, analog audio, and Dante. Connect your smartphone, tablet (iOS and Android), and other mobile devices via Bluetooth or use the analog dual RCA and stereo 3.5mm TRS input jacks to convert the signal to digital for transmission through a Dante network.

Power, control, and audio data are transmitted by only one network cable for simple ease of operation. This single-cable solution mitigates ground loops and other audio issues. The Bluetooth Audio to Dante interface is designed for use with standard dual-gang US wall boxes with Decora faceplates.

Simple and Intuitive Bluetooth Pairing Bluetooth 5.0 for Stability & Long Range Works with Most Smartphones and Tablets Dual RCA and 3.5mm TRS Stereo Inputs Single Cable Power & Audio Transmission Easily Installs in Standard US Wall Box Connection Status Through LED Indicator Supports PoE

Parameters
Input Interface	Bluetooth 5.0, Stereo Dual RCA 1/8" / 3.5 mm TRS
Output Interface	Bluetooth 5.0, Stereo 1/8" / 3.5 mm TRS
Dante Interface	RJ45 Interface, Stereo Input / Output
Frequency Response	20 Hz to 20 kHz
Signal-to-Noise Ratio (SNR)	>100 dB
Noise Floor	-90 dB
THD	<0.005%
Form Factor	Dual Gang US
Operating Temperature	32 to 104°F / 0 to 40°C
Operating Humidity	5 to 95%
Power Consumption	2 W
Dimensions (L x W x H)	4.9 x 4.3 x 1.2" / 12.4 x 10.9 x 3.0 cm
Weight	10.9 oz / 310.0 g
Packaging Info
Package Weight	1.33 lb
Box Dimensions (LxWxH)	6.4 x 6.3 x 3.1"

Simple and intuitive Bluetooth pairing
Bluetooth 5.0 for longer range and more stable connections
Compatible with most Apple smartphones, iPads, and Android tablets
RCA and 3.5mm TRS stereo inputs
3.5mm TRS stereo output
Power supply and audio transmission integrated in one cable
Designed to be compatible with standard dual gang US wall boxes with Decora faceplates
Shows the connection status through LED indicator light
Supports PoE (IEEE802.3af)
Supports AES67 RTP audio transport

Related Questions and Answers

Q: 1. can i use this rig with an Apple iPhone XS to then connect a phone call through a mixing board for an audio podcast?

A: The JK Audio AutoHybrid is a telephone audio interface, specifically for an old-fashioned landline, and will not work with a smartphone. I would recommend the JK Audio Daptor Three Bluetooth Cell Phone Audio Interface, B&H # JKDAP3, which can be connected to your iPhone through a 3,5mm cable or Bluetooth wireless, and can be inputted into your mixer. There is also a LINE IN on the unit, so you can send the signal back to the caller. You would require a mixer with and AUX Out feature.

Q: 2. I would like to know if this unit does its own mix minus. I intend to use it with a sound device 302 so no auxiliary sends are available.thanks

A: The JK Audio Auto Hybrid is a basic passive telephone interface. It features a line level input and output on XLR. It will need to be sent a mix-minus signal as there is no control on the unit itself.

Q: 3. Is the USB C Cable detachable?

A: The USB-C cable is removeable.

Q: 4. Does this unit work with digital landlines? I bought a Rolls P19 Patch 11 and it does not work with my Shaw Cable landline.

A: I was going to answer this but B and H will not allow me to provide the address and phone number of the manufacturer so you're on your own, though luck.

Q: 5. Can this be used as the audio input and output device with conferencing applications (Zoom, Teams, etc)?

A: Yes, the Audinate Dante AVIO 2x2 USB Type-A I/O Adapter for Dante Audio Network is capable of integrating Dante devices with conferencing applications such as Zoom and can serve as an input and output device in this manner.

Q: 6. Does this work with any operating system?

A: It is compatible for use with any Windows, Mac or Linux-based computer and no additional software is required.

Q: 7. Can I use a micophone to the Aux (via 3.5 mm jack or usb to 3.5 mm jack adapter) to transmit to a bluetooth speaker?

A: The Logitech Bluetooth Audio Adapter BH #LOBTAA will not allow you to plug a microphone to the AUX. This is only to connect to powered speakers.

Q: 8. I'm looking for a way to input a voice message, which has been processed in iZotope software, onto a standard answering machine, with the goal of having a clean outgoing message. Is the JK Audio AutoHybrid interface the way to achieve this? If not, what device would do the job? Thanks....

A: This should work for your proposed application.

Q: 9. Current requirement for USB power source? 0.5A, 1A?

A: Audinate has not provided a spec for the amount of bus power used by the Dante AVIO 2x2 USB Type-A I/O Adapter for Dante Audio Network.

Q: 10. does this item work with a 70 volt amplifier?

A: The AutoHybrid is a passive telephone audio interface, allowing a telephone signal to be brought into a mixing board as an audio signal, and then separating the caller and sender of the call. Typical use is radio call-in shows, podcasts and conferences.

Ariel	24/09/2024
[>100 dB] Been working with Dante products for few years now. Excellent quality, very easy to use. Saved me lot of work installing new cables and hassle 5

Steve	13/08/2024
[>100 dB] This unit is great for getting 2 channels of audio into your Dante network. Just be sure you have Power Over Ethernet, either from your switch or from an injector, and off you go! 5

Steve	06/07/2024
[>100 dB] This thing works perfect. Hook it up to your network with POE, and it shows up in Dante Controller just like its supposed to, then works without another thought! Indicator lights by the RJ-45 are handy to be sure everything is working. Were using this with a POE injector, and there are no problems. Welcome to the future! 5

Brandon	26/06/2024
[>100 dB] Used this for a balanced headphone amp off of the Dante network. Works great! Allows for two separate channels as stated. No issues. 5

Alexander	22/06/2024
[<0.005%] I am using a these (along with Dante Via) to convert a relatively inexpensive set of active speakers into Dante enabled speakers. Only con so far is that the AVIO adapter is larger than I expected, but definitely not a deal breaker. Pros include near infinite (not really, some limit) speaker runs using Ethernet cable (also must have POE); no ground loop him (digital signal); and the AVIO device can serve as a Dante clock device. 5

Reid	19/06/2024
[5 to 95%] Easily added a pair of inputs to a largely software based Dante setup. Simple, straightforward, and thusfar flawless addition. 5

James	19/06/2024
[-90 dB] Most important - Easy and quick setup. This is being used on a Midas M32. The AVIO uses 2 channels such as 7 & 8 that will need to be linked. It does require Dante virtual soundcard for pc or mac and you will need Dante controller (free) for mapping the channels needed. This requires POE. 5

William	15/06/2024
[2 W] Used it to take TV optical audio output to be able to put it through my surround sound system. Worked very well; excellent quality. 5

Boen Tik	14/06/2024
[<0.005%] About the AVIO, no doubt, it makes our life easier. But, I wanna say thank you to B&H, you are the best. Thanks for your help. Providing the service for us, far far away from your place. You make us to have the opportunity to get what we can not get in our country. 5

Brian	05/06/2024
[2 W] Thankfully nothing much to say, you plug in what you need and it just works. I needed a DAC to take output from an AV system and monitor the audio through active speakers, and didn't need a high-end converter. For casual use cases this works just fine, and the price is right. 5