Featuring an IP67-rated enclosure, the HPE Instant On AP27 Wi-Fi 6 Outdoor Access Pointcan withstand -45 to 145°F temperatures in addition to protecting from rain, wind, and dust. At the same time, this access point is designed to deliver wide-reaching and reliable Wi-Fi 6 (802.11ax) coverage with up to 75 simultaneous users over the 5 GHz and 2.4 GHz bands.

You can provide power and data to the Instant On AP27 through a single cable by connecting its Gigabit Ethernet uplink port to a PoE+ compatible network device. You can install the access point onto a wall or ceiling using its integrated mount. Configure the access point via the HPE Networking Instant On mobile app to set up guest networks, block users, and take advantage of other features.

Wi-Fi 6 (802.11ax)    2.4 GHz / 5 GHz (Dual-Band)    Gigabit Ethernet PoE+ Uplink Port    IP67-Rated Weatherproof Housing    Supports Up to 75 Concurrent Users    Wall and Ceiling Mountable    Supports Instant On Mobile App

The Instant On AP27 Outdoor Access Point AP27 is water- and dust-resilient built to IP67 standards that make it suitable for outdoor use. The hardened outer shell is capable of withstanding harsh temperatures of all seasons, operating between -40 to 149°F.

Guests and employees experience quick and easy onboarding with the free captive portal from the Instant On app or a web portal. Keep customers engaged and staying longer with easy and intuitive guest access and be sure employees are more productive with any time wireless access.

Related Questions and Answers

Q: 1. Can you re-use the ceiling mount from the UAP-AC-Pro?

A: The Ubiquiti Networks UniFi U6 Enterprise Wi-Fi 6E Tri-Band Access Point BH #UBU6ENTERPRS can use the same Ubiquiti Networks UniFi Professional Mounting System as the UAP-AC-Pro.

Q: 2. Can two original Serv Pros connect to the Link AX to be viewed on the VUER app?

A: Yes, you can connect up to 10 devices to the Teradek Link AX. However, depending on the resolution, and framerate you may need to reduce the video bitrate.

Q: 3. Can this product be installed in a dry location on a screened porch?

A: The Ubiquiti Networks UniFi IW HD In-Wall Wi-Fi Access Point BH #UBUAPIWHDUS is designed for indoor use but it might be ok if you are sure it will be dry and it won't be exposed to direct sunlight. It is rated to work at: Operating Temperature: -10 to 60° C (14 to 140° F) Operating Humidity: 5 to 95% Noncondensing

Q: 4. Can this unit be mounted on wall vs ceiling?

A: Yes, included with the product would even be a wall mount option

Q: 5. Is this product compatible with TL-PA7017?

A: Yes, the TP-Link TL-WPA7617 is compatible with the TP-Link AV1000 Powerline Ethernet Adapter.

Q: 6. The BH listing shows this includes 5 Pieces but I only see three pieces. What am I missing?

A: Included in the box are 5 access points.

Q: 7. Is this TP Link adapter compatible with a Net Gear Powerline 1000 system?

A: Yes, this TP-Link TL-WPA7617 AV1000 Powerline Access Point Module is compatible with the Netgear PL1000 Powerline 1000 Network Adapter Kit. It is compatible with all HomePlug AV and AV2 Standard Powerline adapters.

Q: 8. We installed one unit in the guest bedroom and the neon glows a bit much, can we cover the unit with material to dim the glow?

A: Hi! Rather than physically covering the unit, you may want to consider simply disabling the built in LED. To do this (using the desktop UniFi controller software): Login to the UniFi controller -- Select Settings (Gear icon) --Select Site -- Uncheck the option to enable the status LED -- Select Apply Changes. Please note that this applies to all of the access points you manage (unless you have set-up multiple sites); if you have more than one access point, all of their LEDs will be disabled. If you are using the mobile application to manage your device(s), the ability to disable the LED is coming in a future update. As for physically covering the unit, I suppose you could do so with minimal effects (depending on the material), but I would strongly suggest disabling the LED over covering the unit. The last thing you want is to adversely affect the signal emitted from the device.

Q: 9. The previous IW product had issues with range, and would not "go through" walls. Is this one any better?

A: You should see some improvement with this Ubiquiti Networks UniFi IW HD In-Wall Wi-Fi Access Point. However, you should always be aware on the walls are made out of.

Q: 10. Will this work with the dream machine?

A: Yes, it is compatible. It does not come with power so you can either use a poe switch or injector such as: https://www.bhphotovideo.com/c/product/1079129-REG/ubiquiti_networks_poe_48_24w_poe_adapter_poe.html