The Mount-It! Dual-Screen Floor Stand with Wide Baseprovides a digital signage solution for displaying back-to-back screens. This mount holds two 65" displays up to 165 lb each in portrait orientation. Adjust the viewing angle with the -6 to 15° tilt options. Displays that utilize VESA standards up to 400 x 600mm will work with this mount, and the base can be bolted down for a sturdier foundation. Keep the area clean and professional using the integrated cable management that safely hides cords and signage connectors.

Holds 2 x 65" Displays up to 165 lb Each    Back-to-Back Configuration    -6 to 15° of Tilt    Up to 400 x 600mm VESA Standard    Portrait Mode

Related Questions and Answers

Q: 1. Will this work with a flashpoint c stand?

A: It might, the column from each brand will vary slightly in thickness it might be a tight fit or not fit at all.

Q: 2. will this work with Matthew c stands?

A: If you mean Matthew's c stands columns. Yes they work perfectly.

Q: 3. What are the 3 dimensions when folded up? So I can see if it will fit in my bag

A: The manufacturer states that the dimensions of the Kupo Runway Stand Base are 4.69 x 6.06 x 5.2 inches (11.9 x 15.4 x 13.2 cm). The MFR only lists the length of the unit when closed/folded; the closed length of the base is 17.25" (43.82 cm).

Q: 4. Will it fit the Impact Turtle Base C-Stand Kit (10.75') ?

A: This runway base can be used with a turtle based Impact c stand.

Q: 5. What's the height of this computer stand?

A: Dimensions 2 x 24 x 11.8" / 50 x 610 x 300 mm

Q: 6. Would this work with Kupo 40" Riser C-Stand Turtle Base Kit (Silver, 9.7') ?

A: Yes, please review the following if you are interested in applying a c-stand column to the following unit. Kupo 20" C-Stand Riser Column (Black) BH #KUKS705011 • MFR #KS705011 https://bhpho.to/3BtEQAN

Q: 7. Will my impact column into the Avenger A2007CB Mini Base?

A: Standard columns from most c-stands fits

Q: 8. Will this fit onto the Dana dolly system?

A: I can't imagine how this runway stand base would work with a Dana doll. This is a roller base. Insert a C-Stand riser column into it's receiver, and you've got a rolling light or monitor stand. Very sturdy and a good buy.

Q: 9. The twist knob on mine seems to be locked so that I cannot actually mount anything to the stand. I'm new to the Avenger brand. Try as I might, it just won't turn. Is there some trick to these?

A: The knob is should simply be turned to the left to retract the screw inside, allowing a column or pin to be inserted into the junior receiver.

Q: 10. Can I install the Kupo 20" C-Stand Riser Column?

A: Yes a Kupo 20" C-stand Riser Column can be inserted into the center of the 340 Roller Stand Base.